| import json | |
| import requests | |
| from authentik.sources.plex.models import UserPlexSourceConnection | |
| connection = UserPlexSourceConnection.objects.filter(user=request.user).first() | |
| if not connection: | |
| ak_logger.info("Overseer: No Plex connection found") | |
| return {} | |
| base_url = "http://overseerr:5055" |
| [gcode_macro PA_CAL] | |
| # Klipper pressure advance line calibration macro. | |
| # Usage: PA_CAL BED=100 NOZZLE=240 PA_START=0.0 PA_STOP=0.1 NZL=0.4 | |
| # Or you can execute with no parameters, which will use values from printer.cfg and saved_variables.cfg. | |
| # First prints a line with current set PA, then prints 21 additional line segments starting with PA_START, and increasing to PA_STOP. | |
| # Based on http://realdeuce.github.io/Voron/PA/pressure_advance.html | |
| # Cleaned up and moved to using saved_variables.cfg by u/jibbsisme | |
| # Sourced from u/Deepsiks, assisted by u/imoftendisgruntled, u/scul86, and thanks to u/beansisfat, u/stray_r | |
| description: Tune Pressure Advance |
I liked the way Grokking the coding interview organized problems into learnable patterns. However, the course is expensive and the majority of the time the problems are copy-pasted from leetcode. As the explanations on leetcode are usually just as good, the course really boils down to being a glorified curated list of leetcode problems.
So below I made a list of leetcode problems that are as close to grokking problems as possible.
| #include <BLEDevice.h> | |
| #include <BLEUtils.h> | |
| #include <BLEServer.h> | |
| #include "BLE2902.h" | |
| #include "BLEHIDDevice.h" | |
| #include "HIDTypes.h" | |
| #include "HIDKeyboardTypes.h" | |
| // See the following for generating UUIDs: | |
| // https://www.uuidgenerator.net/ |
