- Option 108 needs to be accepted
HKLM:\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DhcpIpv6OnlyPreferred => 1
- CLAT is not enabled by default, you can check more of the settings in help and
clat show global
netsh interface clat set global permit=enabled
Microsoft can control which features are available with rollouts. Hopefully this will come back without hacks.
If you want to test this out you should probably sign up as a tester.
What I would do to try and figure out how to re-enable this is to run procmon while using netsh and see if any access to registry keys like below is seen.. but this is just a guess on how to maybe figure out how to re-enable.