Created
February 13, 2024 07:49
-
-
Save adonishi/baaf2fd0356249432a04ead5693c26f6 to your computer and use it in GitHub Desktop.
my klipper's printer.cfg file for Tronxy CRUX1 (beep not working)
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [include mainsail.cfg] | |
| [mcu] | |
| serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0 | |
| restart_method: command | |
| [virtual_sdcard] | |
| path: /home/ado/printer_data/gcodes | |
| [stepper_x] | |
| step_pin: PE5 | |
| dir_pin: PF1 | |
| enable_pin: !PF0 | |
| microsteps: 32 | |
| rotation_distance: 40 | |
| endstop_pin: !PC15 | |
| position_endstop: 0 | |
| position_max: 180 | |
| homing_speed: 100 | |
| [stepper_y] | |
| step_pin: PF9 | |
| dir_pin: !PF3 | |
| enable_pin: !PF5 | |
| microsteps: 32 | |
| rotation_distance: 40 | |
| endstop_pin: !PC14 | |
| position_endstop: 0 | |
| position_max: 180 | |
| homing_speed: 100 | |
| [stepper_z] | |
| step_pin: PA6 | |
| dir_pin: !PF15 | |
| enable_pin: !PA5 | |
| microsteps: 32 | |
| rotation_distance: 8 | |
| endstop_pin: !PC13 | |
| #position_endstop: 0.5 | |
| position_max: 180 | |
| [extruder] | |
| step_pin: PB1 | |
| dir_pin: PF13 | |
| enable_pin: !PF14 | |
| microsteps: 16 | |
| rotation_distance: 16.75 | |
| nozzle_diameter: 0.400 | |
| filament_diameter: 1.750 | |
| heater_pin: PG7 | |
| sensor_type: ATC Semitec 104GT-2 | |
| sensor_pin: PC3 | |
| control = pid | |
| pid_kp = 23.292 | |
| pid_ki = 1.294 | |
| pid_kd = 104.812 | |
| min_temp: 0 | |
| max_temp: 250 | |
| [heater_bed] | |
| heater_pin: PE2 | |
| sensor_type: EPCOS 100K B57560G104F | |
| sensor_pin: PC2 | |
| min_temp: 0 | |
| max_temp: 130 | |
| control = pid | |
| pid_kp = 72.353 | |
| pid_ki = 1.227 | |
| pid_kd = 1066.301 | |
| [printer] | |
| kinematics: cartesian | |
| max_velocity: 500 | |
| max_accel: 3000 | |
| max_z_velocity: 25 | |
| max_z_accel: 30 | |
| [heater_fan hotend_fan] | |
| heater: extruder | |
| heater_temp: 50.0 | |
| pin: PG9 | |
| [fan] | |
| pin: PG0 | |
| [controller_fan drivers_fan] | |
| pin: PD7 | |
| [filament_switch_sensor filament_sensor] | |
| pause_on_runout: True | |
| runout_gcode: M25 | |
| switch_pin: !PE6 | |
| [output_pin beeper] | |
| pin: PA8 | |
| [bed_screws] | |
| screw1: 24, 11 | |
| screw2: 163, 11 | |
| screw3: 163, 172 | |
| screw4: 24, 172 | |
| #*# <---------------------- SAVE_CONFIG ----------------------> | |
| #*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated. | |
| #*# | |
| #*# [stepper_z] | |
| #*# position_endstop = 0.120 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment