( ˶'-'˶) allanchen2019

Proxmox + acme.sh

With this we show how to use acme.sh instead of the original Letsencrypt interface.

Acme.sh is just a Bash script that can run on pretty much any *nix environment.
It is quite simple but also quite powerfull.

In this guide I will use the cheap and good Dynu service to configure a domain.

	ip tunnel add ipip local ${linux_ip} remote ${mikrotik_ip} mode ipip
	ip link set ipip up
	ip addr add 192.168.3.1/30 dev ipip
	iptables -t mangle -A POSTROUTING -o ipip -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
	iptables -t nat -A POSTROUTING -s 192.168.3.0/30 -o ${linux_output_iface} -j MASQUERADE

	# Creation Date: November 3, 2018
	:local Version "2.0"
	:local LASTUPDATE "05/10/2019"

	# Tested with RouterOS 6.43.4
	#
	# Mikrotik script to implement QoS on internet connections.
	# The script makes use of Address Lists, Firewall rules (Mangle) for connection tagging, and Queue Trees.
	# The script will remove applied rules from previous runs before applying.
	#

	#!/bin/sh

	movefrom='micronssd'
	moveto='wdredpro'

	for vm in $(qm list \| awk '{print $1}' \| grep -Eo '[0-9]{1,3}');
	do
	for storage in $(qm config $vm \| grep $movefrom: \| awk '{print $1}' \| grep -Eo '[a-z0-9]+');
	do
	echo Moving VM$vm Storage $storage

	config setup
	charondebug="ike 2, knl 2, cfg 2, net 2, esp 2, dmn 2, mgr 2"

	conn %default
	# keyexchange=ikev2

	conn mikrotik-1
	# Try connect on daemon start
	auto=start

	$ git pull origin master //run this first, then
	$ git push origin master

-# Stop all containers
-docker stop `docker ps -qa`
-# Remove all containers
-docker rm `docker ps -qa`
-# Remove all images
-docker rmi -f `docker images -qa `
-# Remove all volumes

	$INPUTVIDEO='input.mp4'
	$OUTPUTVIDEO='output.mp4'
	ffmpeg -i $INPUTVIDEO -metadata:s:v rotate="-90" -codec copy $OUTPUTVIDEO