huawei-lte-apiexport HUAWEI_ROUTER_IP_ADDRESS="" # Router IP address
export HUAWEI_ROUTER_ACCOUNT="" # Router Username
export HUAWEI_ROUTER_PASSWORD="" # Router Password
export TARGET_PHONE_NUMBERS="" # Phone numbers to forward to (international format, coma separated list)
export DELAY_WAIT_SECONDS="" # Delay between two checks (when there is no new SMS)
export DELAY_LOOP_SECONDS="" # Delay between two SMS read
python3 sms-forwarder.py| import sys | |
| import time | |
| from os import environ | |
| from huawei_lte_api.Client import Client | |
| from huawei_lte_api.AuthorizedConnection import AuthorizedConnection | |
| from huawei_lte_api.Connection import Connection | |
| from huawei_lte_api.api.User import User | |
| from huawei_lte_api.enums.sms import BoxTypeEnum, TextModeEnum | |
| from huawei_lte_api.enums.user import LoginStateEnum | |
| import huawei_lte_api.exceptions | |
| try: | |
| HUAWEI_ROUTER_IP_ADDRESS = environ['HUAWEI_ROUTER_IP_ADDRESS'] | |
| HUAWEI_ROUTER_ACCOUNT = environ['HUAWEI_ROUTER_ACCOUNT'] | |
| HUAWEI_ROUTER_PASSWORD = environ['HUAWEI_ROUTER_PASSWORD'] | |
| TARGET_PHONE_NUMBERS = environ['TARGET_PHONE_NUMBERS'].split(',') | |
| DELAY_LOOP_SECONDS = int(environ.get('DELAY_LOOP_SECONDS', "1")) | |
| DELAY_WAIT_SECONDS = int(environ.get('DELAY_WAIT_SECONDS', "15")) | |
| except: | |
| print('Please provide the required environment variables.') | |
| sys.exit(1) | |
| connection = None | |
| client = None | |
| # Use infinite loop to check SMS | |
| while True: | |
| try: | |
| # Establish a connection with authorized | |
| connection = AuthorizedConnection('http://{}:{}@{}/'.format(HUAWEI_ROUTER_ACCOUNT, HUAWEI_ROUTER_PASSWORD, HUAWEI_ROUTER_IP_ADDRESS)) | |
| client = Client(connection) | |
| # get first SMS (unread priority) | |
| sms_list = client.sms.get_sms_list(1, BoxTypeEnum.LOCAL_INBOX, 1, 0, 1, 1) | |
| # Skip this loop if no messages | |
| if sms_list['Messages'] == None: | |
| client.user.logout() | |
| time.sleep(DELAY_WAIT_SECONDS) | |
| continue | |
| # Skip this loop if the SMS was read | |
| if int(sms_list['Messages']['Message']['Smstat']) == 1: | |
| client.user.logout() | |
| time.sleep(DELAY_WAIT_SECONDS) | |
| continue | |
| sms = sms_list['Messages']['Message'] | |
| # Found a new SMS | |
| print('{Date} Found a new SMS ID:{Message_Index} From:{Phone_Number}'.format(Date=sms['Date'], Message_Index=sms['Index'], Phone_Number=sms['Phone'])) | |
| print('Details: {}'.format(sms)) | |
| # Skip if SMS is an acknowledgment | |
| if sms['SmsType'] != '7': | |
| # Forward to target numbers | |
| sent_sms = client.sms.send_sms( | |
| phone_numbers=TARGET_PHONE_NUMBERS, | |
| message=sms.get('Content', ''), | |
| sca=sms.get('Sca', ''), | |
| ) | |
| # Set SMS as read | |
| client.sms.set_read(sms['Index']) | |
| # Logout | |
| client.user.logout() | |
| time.sleep(DELAY_LOOP_SECONDS) | |
| except huawei_lte_api.exceptions.ResponseErrorLoginRequiredException as e: | |
| pass | |
| except KeyboardInterrupt: | |
| # Force logout on exit | |
| client.user.logout() | |
| print('Exitting...') | |
| sys.exit(0) | |
| except Exception as e: | |
| print('Router connection failed! Please check the settings. \nError message:\n{error_msg}'.format(error_msg=e)) | |
| # Force logout on exit | |
| client.user.logout() | |
| print('Exitting...') | |
| sys.exit(1) |
@pawnedprawn I updated the markdown file. Let me know if you need more details.
Thank you very much for replying. Where do I begin? This will be helpful for me since the modem is far from my home.
First, ensure your model is compatible by checking https://github.com/Salamek/huawei-lte-api#tested-on.
Then, ensure you have a local network access to your router.
Follow guidance at https://www.192-168-1-1-ip.co/huawei/routers/789/ to check you can connect to the administration panel.
Next, install the python dependencies on the box that will execute this script and set environment variables.
Finally, launch the script.
Hi @aslafy-z!
My routers compatible and I have access to the admin panel but I am also a total noob and not sure how to install the “python dependencies”. I’d like to learn but could you point me in the right direction? Can this be installed directly on the router? Normally I’d just trial and error until I figure it out but don’t want to brick it! Thanks for any help.
Hello, im a total noob, how do i use this? Thank you