-
-
Save baldowl/a413c2a08c10bc62c1a72328caac98c1 to your computer and use it in GitHub Desktop.
| # Originally used with ESPHome 2023.11.06; tested with ESPHome 2024.11.3 and 2024.12.1 | |
| esp32: | |
| board: esp32-c6-devkitc-1 | |
| flash_size: 8MB | |
| variant: esp32c6 | |
| framework: | |
| type: esp-idf | |
| version: 5.1.2 # latest version when tested with ESPHome 2023.11.06 | |
| sdkconfig_options: | |
| CONFIG_ESPTOOLPY_FLASHSIZE_8MB: y | |
| platform_version: 6.4.0 # latest version when tested with ESPHome 2023.11.06 | |
| # If using ESPHome 2024.12.0, this can be greately simplified: | |
| # | |
| # esp32: | |
| # board: esp32-c6-devkitc-1 | |
| # flash_size: 8MB | |
| # framework: | |
| # type: esp-idf | |
| # sdkconfig_options: | |
| # CONFIG_ESPTOOLPY_FLASHSIZE_8MB: y |
| light: | |
| - platform: esp32_rmt_led_strip | |
| name: Status LED | |
| pin: GPIO8 | |
| rgb_order: RGB | |
| num_leds: 1 | |
| rmt_channel: 0 | |
| chipset: ws2812 | |
| entity_category: config |
@trianglesis The error message is unclear but it seems to be saying that "rmt_channel: 0" is not supported. Removing that fixes it for me.
@trianglesis The error message is unclear but it seems to be saying that "rmt_channel: 0" is not supported. Removing that fixes it for me.
That is interesting.
Does that give you control over the board's LED?
- power on\off
- color change
@trianglesis Yep! All works fine. Not the same board as yours, this is a knockoff of the Waveshare ESP-C6-Zero board but I'd be surprised if it was different.
I played with another similar device this weekend: https://www.waveshare.com/esp32-c6-lcd-1.47.htm
Like @midnightveil, I also had that rmt_channel error about IDF v5. LED works great with that line removed 👍
It worked just fine!
But colours are inverted:
light:
- platform: esp32_rmt_led_strip
name: Status LED
pin: GPIO8
rgb_order: GRB
num_leds: 1
chipset: ws2812
web_server:
sorting_group_id: sorting_group_controls
Change the rgb_order to the correct order. Probably look at your data sheet for this.
for anyone that might stumble upon:
I happened to have some cheap knockoff of the esp32c6-devkitc, that seems to be based on https://github.com/wuxx/nanoESP32-C6/blob/master/hardware/nanoESP32C6.pdf
However, the R4 resistor, that was supposed to be 10kOhm, was in my case shorted to 5V, causing no data going through. that means no LED was working, no matter what I tried.
Replacing it with a proper 10k resistor did solve the problem, attached picture for anyone that would like to fix it themselves.
It's finicky to get it right, as I had 0604 components, but you can fit them if you try hard enough :)
Does not work in my setup with any version.
light.esp32_rmt_led_strip: [source my_proj/esp32-c6-1.yaml:203] platform: esp32_rmt_led_strip rgb_order: RGB pin: GPIO08 num_leds: 1 This feature is not available for the IDF framework version 5. rmt_channel: 0 chipset: ws2812 name: ESP32_C6_1 RTM LED Light web_server: sorting_group_id: sorting_group_controlsBoard: https://www.aliexpress.com/item/1005006271962503.html