Cy cyfinfaza

Aspiring full-stack developer. From hardware to firmware; from backend to frontend; from idea to reality.

cyfinfaza / MagTilePython-Test2-Diagonal.py

Created July 17, 2024 21:11

	from TileController import TileController
	import time
	import signal
	import sys

	# Global variable to store the controller
	controller = None

	def signal_handler(sig, frame):
	print('\nKeyboard interrupt received. Cleaning up...')

cyfinfaza / SIL_MagTile_V1.ino

Last active July 17, 2024 21:11

SIL MagTile Arduino Firmware

	#include <Arduino.h>
	#include <Wire.h>
	#include <EEPROM.h>

	#define MAX_ADDRESSES 32
	#define MAX_ROWS 6
	#define MAX_COLUMNS 6
	#define POWER_ARRAY_ROWS (MAX_ROWS * 3)
	#define POWER_ARRAY_COLUMNS (MAX_COLUMNS * 3)

cyfinfaza / MagTilePython-Test1.py

Created July 11, 2024 20:34

MagTilePython script to do a few tests and blinkall

	import TileController

	with TileController.TileController("/dev/tty.usbmodem101") as tc:
	print(tc.read_width())
	print(tc.read_height())
	print(tc.read_address_list())
	print(tc.scan_addresses())

	tc.blinkall_start()
	input("Press Enter to stop blinking")

cyfinfaza / MagTilePython-Test2.py

Last active July 17, 2024 21:10

MagTilePython script to turn on all coils in snaking pattern (Claude 3.5 Sonnet)

	from TileController import TileController
	import time
	import signal
	import sys

	# Global variable to store the controller
	controller = None

	def signal_handler(sig, frame):
	print('\nKeyboard interrupt received. Cleaning up...')

cyfinfaza / TileController.py

Created July 11, 2024 20:30

SIL MagTile Python API (made using Claude 3.5 Sonnet)

	import serial
	import time

	class TileController:
	def __init__(self, port, baudrate=115200, timeout=1):
	self.ser = serial.Serial(port, baudrate, timeout=timeout)
	time.sleep(1) # Wait for Arduino to reset
	self._clear_initial_message() # Clear the "Command Line Terminal Ready" message
	self.scan_addresses() # Perform initial scan

cyfinfaza / image.py

Last active January 8, 2025 08:32

image

	import matplotlib.pyplot as plt
	import matplotlib.image as mpimg
	img = mpimg.imread('your_image.png')
	imgplot = plt.imshow(img)
	plt.show()

cyfinfaza / cy.py

Last active March 21, 2021 01:47

c-y

messagesFile = open("messages.py", "r")

cyfinfaza / velocity.py

Created December 14, 2020 01:08

velocity

cyfinfaza / something.py

Last active December 14, 2020 01:07

something

from math import *