d6e d6e

Installation:

Place hyperboria.sh in /etc/init.d/hyperboria
chmod +x /etc/init.d/hyperboria
update-rc.d hyperboria defaults

This will cause it to automatically start with your computer. You can control it with /etc/init.d/hyperboria . Some systems (Ubuntu, not sure about others) allow you to use the service command, which shortens the command to `service hyperboria

	// /etc/port-forward.json dont forget to delete this line since comments are not valid JSON
	// These are just sample values, obviously you'll want to change most of it
	{
	"public-if": "enp5s0",
	"port-forwards": {
	"80": "10.5.0.80:80",
	"443": "10.5.0.80:443",
	"8443": "10.5.0.60:8443",
	"5222": "10.5.0.198:5222",
	"5269": "10.5.0.198:5269",

	sudo apt-get update
	sudo apt-get install python-dev git python-pip automake libtool libssl-dev
	git clone https://github.com/numenta/nupic.git
	mkdir -p nta/eng
	echo "
	export NTA=$HOME/nta/eng
	export NUPIC=$HOME/nupic
	export BUILDDIR=/tmp/ntabuild
	export MK_JOBS=3
	source $HOME/nupic/env.sh" >> ~/.bashrc