Last active
August 29, 2015 14:22
-
-
Save david56/ffedf7ac4d4f32aff0fd to your computer and use it in GitHub Desktop.
AS5712_54X with UEFI disabled recovery ISO console output
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ONIE: Rescue Mode ... | |
| Platform : x86_64-accton_as5712_54x-r0 | |
| Version : 2015.6.2-dirty | |
| Build Date: 2015-06-02T11:16+0800 | |
| ehci_hcd 0000:00:16.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:16.0 setup! | |
| ehci_hcd 0000:00:16.0: init 0000:00:16.0 fail, -19 | |
| Info: Mounting kernel filesystems... done. | |
| Info: Using eth0 MAC address: 00:00:e8:a0:00:00 | |
| Info: eth0: Checking link... up. | |
| Info: Trying DHCPv4 on interface: eth0 | |
| ONIE: Using DHCPv4 addr: eth0: 192.168.1.230 / 255.255.255.0 | |
| Starting: dropbear ssh daemon... done. | |
| Starting: telnetd... done. | |
| discover: Rescue mode detected. Installer disabled. | |
| Please press Enter to activate this console. | |
| To check the install status inspect /var/log/onie.log. | |
| Try this: tail -f /var/log/onie.log | |
| ** Rescue Mode Enabled ** | |
| ONIE-RECOVERY:/ # dmesg | |
| Linux version 3.2.35-onie+ (david_yang@Tainan-Linux-1) (gcc version 4.7.3 (crosstool-NG 1.19.0 - ONIE-2015.6.2-dirty) ) #1 SMP Tue Jun 2 11:15:25 CST 2015 | |
| Command line: BOOT_IMAGE=/vmlinuz quiet console=tty0 console=ttyS1,115200n8 boot_env=recovery boot_reason=rescue | |
| KERNEL supported cpus: | |
| Intel GenuineIntel | |
| AMD AuthenticAMD | |
| BIOS-provided physical RAM map: | |
| BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) | |
| BIOS-e820: 0000000000100000 - 000000007f145000 (usable) | |
| BIOS-e820: 000000007f145000 - 000000007f175000 (reserved) | |
| BIOS-e820: 000000007f175000 - 000000007f222000 (usable) | |
| BIOS-e820: 000000007f222000 - 000000007f4a1000 (ACPI NVS) | |
| BIOS-e820: 000000007f4a1000 - 000000007f5f3000 (reserved) | |
| BIOS-e820: 000000007f5f3000 - 000000007f63a000 type 20 | |
| BIOS-e820: 000000007f63a000 - 000000007f800000 (usable) | |
| BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) | |
| BIOS-e820: 00000000fed01000 - 00000000fed04000 (reserved) | |
| BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) | |
| BIOS-e820: 00000000fed0c000 - 00000000fed10000 (reserved) | |
| BIOS-e820: 00000000fed1c000 - 00000000fed1d000 (reserved) | |
| BIOS-e820: 00000000fef00000 - 00000000ff000000 (reserved) | |
| BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) | |
| BIOS-e820: 0000000100000000 - 0000000280000000 (usable) | |
| NX (Execute Disable) protection: active | |
| DMI 2.7 present. | |
| DMI: Accton AS5712-54X/To be filled by O.E.M., BIOS 5.6.5 06/19/2014 | |
| e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) | |
| e820 remove range: 00000000000a0000 - 0000000000100000 (usable) | |
| No AGP bridge found | |
| last_pfn = 0x280000 max_arch_pfn = 0x400000000 | |
| MTRR default type: write-back | |
| MTRR fixed ranges enabled: | |
| 00000-9FFFF write-back | |
| A0000-BFFFF uncachable | |
| C0000-E7FFF write-through | |
| E8000-FFFFF write-protect | |
| MTRR variable ranges enabled: | |
| 0 base 080000000 mask F80000000 uncachable | |
| 1 base 280000000 mask F80000000 uncachable | |
| 2 base 300000000 mask F00000000 uncachable | |
| 3 base 400000000 mask C00000000 uncachable | |
| 4 base 800000000 mask 800000000 uncachable | |
| 5 base 07F800000 mask FFF800000 uncachable | |
| 6 disabled | |
| 7 disabled | |
| x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 | |
| last_pfn = 0x7f800 max_arch_pfn = 0x400000000 | |
| found SMP MP-table at [ffff8800000fd6a0] fd6a0 | |
| initial memory mapped : 0 - 20000000 | |
| Base memory trampoline at [ffff88000009a000] 9a000 size 8192 | |
| init_memory_mapping: 0000000000000000-000000007f800000 | |
| 0000000000 - 007f800000 page 2M | |
| kernel direct mapping tables up to 7f800000 @ 1fffd000-20000000 | |
| init_memory_mapping: 0000000100000000-0000000280000000 | |
| 0100000000 - 0280000000 page 2M | |
| kernel direct mapping tables up to 280000000 @ 7f7f9000-7f800000 | |
| RAMDISK: 35aa0000 - 36d48000 | |
| ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219) | |
| [ffffea0000000000-ffffea0009ffffff] PMD -> [ffff880277600000-ffff88027f5fffff] on node 0 | |
| Zone PFN ranges: | |
| DMA 0x00000010 -> 0x00001000 | |
| DMA32 0x00001000 -> 0x00100000 | |
| Normal 0x00100000 -> 0x00280000 | |
| Movable zone start PFN for each node | |
| early_node_map[5] active PFN ranges | |
| 0: 0x00000010 -> 0x000000a0 | |
| 0: 0x00000100 -> 0x0007f145 | |
| 0: 0x0007f175 -> 0x0007f222 | |
| 0: 0x0007f63a -> 0x0007f800 | |
| 0: 0x00100000 -> 0x00280000 | |
| On node 0 totalpages: 2093896 | |
| DMA zone: 64 pages used for memmap | |
| DMA zone: 6 pages reserved | |
| DMA zone: 3914 pages, LIFO batch:0 | |
| DMA32 zone: 16320 pages used for memmap | |
| DMA32 zone: 500728 pages, LIFO batch:31 | |
| Normal zone: 24576 pages used for memmap | |
| Normal zone: 1548288 pages, LIFO batch:31 | |
| Intel MultiProcessor Specification v1.4 | |
| MPTABLE: OEM ID: A M I | |
| MPTABLE: Product ID: ALASKA | |
| MPTABLE: APIC at: 0xFEE00000 | |
| Processor #0 (Bootup-CPU) | |
| Processor #2 | |
| Processor #4 | |
| Processor #6 | |
| IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 | |
| Processors: 4 | |
| SMP: Allowing 4 CPUs, 0 hotplug CPUs | |
| nr_irqs_gsi: 40 | |
| Allocating PCI resources starting at 7f800000 (gap: 7f800000:60800000) | |
| Booting paravirtualized kernel on bare hardware | |
| setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 | |
| PERCPU: Embedded 25 pages/cpu @ffff88027fc00000 s70976 r8192 d23232 u524288 | |
| pcpu-alloc: s70976 r8192 d23232 u524288 alloc=1*2097152 | |
| pcpu-alloc: [0] 0 1 2 3 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2052930 | |
| Kernel command line: BOOT_IMAGE=/vmlinuz quiet console=tty0 console=ttyS1,115200n8 boot_env=recovery boot_reason=rescue | |
| PID hash table entries: 4096 (order: 3, 32768 bytes) | |
| Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) | |
| Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) | |
| Checking aperture... | |
| No AGP bridge found | |
| Memory: 8136848k/10485760k available (4454k kernel code, 2110176k absent, 238736k reserved, 4128k data, 516k init) | |
| SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| Hierarchical RCU implementation. | |
| CONFIG_RCU_FANOUT set to non-default value of 32 | |
| NR_IRQS:33024 nr_irqs:712 16 | |
| Console: colour dummy device 80x25 | |
| console [tty0] enabled | |
| console [ttyS1] enabled | |
| Fast TSC calibration using PIT | |
| Detected 2400.278 MHz processor. | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.55 BogoMIPS (lpj=2400278) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 256 | |
| CPU: Physical Processor ID: 0 | |
| CPU: Processor Core ID: 0 | |
| using mwait in idle threads. | |
| ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
| CPU0: Intel(R) Atom(TM) CPU C2538 @ 2.40GHz stepping 08 | |
| Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver. | |
| ... version: 3 | |
| ... bit width: 40 | |
| ... generic registers: 2 | |
| ... value mask: 000000ffffffffff | |
| ... max period: 000000007fffffff | |
| ... fixed-purpose events: 3 | |
| ... event mask: 0000000700000003 | |
| Booting Node 0, Processors #1 | |
| smpboot cpu 1: start_ip = 9a000 | |
| #2 | |
| smpboot cpu 2: start_ip = 9a000 | |
| #3 Ok. | |
| smpboot cpu 3: start_ip = 9a000 | |
| Brought up 4 CPUs | |
| Total of 4 processors activated (19198.41 BogoMIPS). | |
| xor: automatically using best checksumming function: generic_sse | |
| generic_sse: 7692.000 MB/sec | |
| xor: using function: generic_sse (7692.000 MB/sec) | |
| NET: Registered protocol family 16 | |
| PCI: Using configuration type 1 for base access | |
| bio: create slab <bio-0> at 0 | |
| raid6: int64x1 1226 MB/s | |
| raid6: int64x2 1070 MB/s | |
| raid6: int64x4 1164 MB/s | |
| raid6: int64x8 1156 MB/s | |
| raid6: sse2x1 3085 MB/s | |
| raid6: sse2x2 3652 MB/s | |
| raid6: sse2x4 5179 MB/s | |
| raid6: using algorithm sse2x4 (5179 MB/s) | |
| ACPI: Interpreter disabled. | |
| SCSI subsystem initialized | |
| libata version 3.00 loaded. | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| PCI: Probing PCI hardware | |
| PCI: Probing PCI hardware (bus 00) | |
| pci_bus 0000:00: scanning bus | |
| pci 0000:00:00.0: [8086:1f0c] type 0 class 0x000600 | |
| pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:01.0: [8086:1f10] type 1 class 0x000604 | |
| pci 0000:00:01.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:01.0: reg 10: [mem 0xdff60000-0xdff7ffff 64bit] | |
| pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:01.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:01.0: PME# disabled | |
| pci 0000:00:02.0: [8086:1f11] type 1 class 0x000604 | |
| pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:02.0: reg 10: [mem 0xdff40000-0xdff5ffff 64bit] | |
| pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:02.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:02.0: PME# disabled | |
| pci 0000:00:03.0: [8086:1f12] type 1 class 0x000604 | |
| pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:03.0: reg 10: [mem 0xdff20000-0xdff3ffff 64bit] | |
| pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:03.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:03.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:03.0: PME# disabled | |
| pci 0000:00:0e.0: [8086:1f14] type 0 class 0x000600 | |
| pci 0000:00:0e.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:0e.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:0e.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:0f.0: [8086:1f16] type 0 class 0x000806 | |
| pci 0000:00:0f.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:0f.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:0f.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:0f.0: PME# disabled | |
| pci 0000:00:13.0: [8086:1f15] type 0 class 0x000880 | |
| pci 0000:00:13.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:13.0: reg 10: [mem 0xdff87000-0xdff873ff 64bit] | |
| pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:13.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:14.0: [8086:1f41] type 0 class 0x000200 | |
| pci 0000:00:14.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:14.0: reg 10: [mem 0xdff00000-0xdff1ffff 64bit] | |
| pci 0000:00:14.0: reg 18: [io 0xf060-0xf07f] | |
| pci 0000:00:14.0: reg 20: [mem 0xdff80000-0xdff83fff 64bit] | |
| pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:14.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:14.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:14.0: PME# disabled | |
| pci 0000:00:16.0: [8086:1f2c] type 0 class 0x000c03 | |
| pci 0000:00:16.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:16.0: reg 10: [mem 0xfd000000-0xfd0003ff] | |
| pci 0000:00:16.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:16.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:16.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:16.0: PME# disabled | |
| pci 0000:00:17.0: [8086:1f22] type 0 class 0x000106 | |
| pci 0000:00:17.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:17.0: reg 10: [io 0xf0f0-0xf0f7] | |
| pci 0000:00:17.0: reg 14: [io 0xf0e0-0xf0e3] | |
| pci 0000:00:17.0: reg 18: [io 0xf0d0-0xf0d7] | |
| pci 0000:00:17.0: reg 1c: [io 0xf0c0-0xf0c3] | |
| pci 0000:00:17.0: reg 20: [io 0xf040-0xf05f] | |
| pci 0000:00:17.0: reg 24: [mem 0xdff86000-0xdff867ff] | |
| pci 0000:00:17.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:17.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:17.0: PME# supported from D3hot | |
| pci 0000:00:17.0: PME# disabled | |
| pci 0000:00:18.0: [8086:1f32] type 0 class 0x000106 | |
| pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:18.0: reg 10: [io 0xf0b0-0xf0b7] | |
| pci 0000:00:18.0: reg 14: [io 0xf0a0-0xf0a3] | |
| pci 0000:00:18.0: reg 18: [io 0xf090-0xf097] | |
| pci 0000:00:18.0: reg 1c: [io 0xf080-0xf083] | |
| pci 0000:00:18.0: reg 20: [io 0xf020-0xf03f] | |
| pci 0000:00:18.0: reg 24: [mem 0xdff85000-0xdff857ff] | |
| pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:18.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:18.0: PME# supported from D3hot | |
| pci 0000:00:18.0: PME# disabled | |
| pci 0000:00:1f.0: [8086:1f38] type 0 class 0x000601 | |
| pci 0000:00:1f.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci 0000:00:1f.3: [8086:1f3c] type 0 class 0x000c05 | |
| pci 0000:00:1f.3: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:00:1f.3: reg 10: [mem 0xdff84000-0xdff8401f] | |
| pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] | |
| pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x26 | |
| pci_bus 0000:00: fixups for bus | |
| pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0 | |
| pci_bus 0000:01: scanning bus | |
| pci 0000:01:00.0: [14e4:b850] type 0 class 0x000200 | |
| pci 0000:01:00.0: calling quirk_mmio_always_on+0x0/0x17 | |
| pci 0000:01:00.0: reg 10: [mem 0xdfe00000-0xdfe3ffff 64bit] | |
| pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x168 | |
| pci 0000:01:00.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:00.0: PME# disabled | |
| pci_bus 0000:01: fixups for bus | |
| pci 0000:00:01.0: PCI bridge to [bus 01-01] | |
| pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff] | |
| pci_bus 0000:01: bus scan returning with max=01 | |
| pci 0000:00:02.0: scanning [bus 02-02] behind bridge, pass 0 | |
| pci_bus 0000:02: scanning bus | |
| pci_bus 0000:02: fixups for bus | |
| pci 0000:00:02.0: PCI bridge to [bus 02-02] | |
| pci_bus 0000:02: bus scan returning with max=02 | |
| pci 0000:00:03.0: scanning [bus 03-03] behind bridge, pass 0 | |
| pci_bus 0000:03: scanning bus | |
| pci_bus 0000:03: fixups for bus | |
| pci 0000:00:03.0: PCI bridge to [bus 03-03] | |
| pci_bus 0000:03: bus scan returning with max=03 | |
| pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1 | |
| pci 0000:00:02.0: scanning [bus 02-02] behind bridge, pass 1 | |
| pci 0000:00:03.0: scanning [bus 03-03] behind bridge, pass 1 | |
| pci_bus 0000:00: bus scan returning with max=03 | |
| pci 0000:00:1f.0: default IRQ router [8086:1f38] | |
| PCI: pci_cache_line_size set to 64 bytes | |
| pci 0000:00:01.0: BAR 0: reserving [mem 0xdff60000-0xdff7ffff flags 0x140204] (d=0, p=0) | |
| pci 0000:00:02.0: BAR 0: reserving [mem 0xdff40000-0xdff5ffff flags 0x140204] (d=0, p=0) | |
| pci 0000:00:03.0: BAR 0: reserving [mem 0xdff20000-0xdff3ffff flags 0x140204] (d=0, p=0) | |
| pci 0000:00:14.0: BAR 0: reserving [mem 0xdff00000-0xdff1ffff flags 0x140204] (d=0, p=0) | |
| pci 0000:00:14.0: BAR 2: reserving [io 0xf060-0xf07f flags 0x40101] (d=0, p=0) | |
| pci 0000:00:14.0: BAR 4: reserving [mem 0xdff80000-0xdff83fff flags 0x140204] (d=0, p=0) | |
| pci 0000:00:16.0: BAR 0: reserving [mem 0xfd000000-0xfd0003ff flags 0x40200] (d=0, p=0) | |
| pci 0000:00:17.0: BAR 0: reserving [io 0xf0f0-0xf0f7 flags 0x40101] (d=0, p=0) | |
| pci 0000:00:17.0: BAR 1: reserving [io 0xf0e0-0xf0e3 flags 0x40101] (d=0, p=0) | |
| pci 0000:00:17.0: BAR 2: reserving [io 0xf0d0-0xf0d7 flags 0x40101] (d=0, p=0) | |
| pci 0000:00:17.0: BAR 3: reserving [io 0xf0c0-0xf0c3 flags 0x40101] (d=0, p=0) | |
| pci 0000:00:17.0: BAR 4: reserving [io 0xf040-0xf05f flags 0x40101] (d=0, p=0) | |
| pci 0000:00:17.0: BAR 5: reserving [mem 0xdff86000-0xdff867ff flags 0x40200] (d=0, p=0) | |
| pci 0000:00:18.0: BAR 0: reserving [io 0xf0b0-0xf0b7 flags 0x40101] (d=0, p=0) | |
| pci 0000:00:18.0: BAR 1: reserving [io 0xf0a0-0xf0a3 flags 0x40101] (d=0, p=0) | |
| pci 0000:00:18.0: BAR 2: reserving [io 0xf090-0xf097 flags 0x40101] (d=0, p=0) | |
| pci 0000:00:18.0: BAR 3: reserving [io 0xf080-0xf083 flags 0x40101] (d=0, p=0) | |
| pci 0000:00:18.0: BAR 4: reserving [io 0xf020-0xf03f flags 0x40101] (d=0, p=0) | |
| pci 0000:00:18.0: BAR 5: reserving [mem 0xdff85000-0xdff857ff flags 0x40200] (d=0, p=0) | |
| pci 0000:00:13.0: BAR 0: reserving [mem 0xdff87000-0xdff873ff flags 0x140204] (d=1, p=1) | |
| pci 0000:00:1f.3: BAR 0: reserving [mem 0xdff84000-0xdff8401f flags 0x40200] (d=1, p=1) | |
| pci 0000:00:1f.3: BAR 4: reserving [io 0xf000-0xf01f flags 0x40101] (d=1, p=1) | |
| pci 0000:01:00.0: BAR 0: reserving [mem 0xdfe00000-0xdfe3ffff flags 0x140204] (d=1, p=1) | |
| reserve RAM buffer: 000000007f145000 - 000000007fffffff | |
| reserve RAM buffer: 000000007f222000 - 000000007fffffff | |
| reserve RAM buffer: 000000007f800000 - 000000007fffffff | |
| pnp: PnP ACPI: disabled | |
| PCI: max bus depth: 1 pci_try_num: 2 | |
| pci 0000:00:01.0: PCI bridge to [bus 01-01] | |
| pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff] | |
| pci 0000:00:02.0: PCI bridge to [bus 02-02] | |
| pci 0000:00:03.0: PCI bridge to [bus 03-03] | |
| pci 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 16 | |
| pci 0000:00:01.0: setting latency timer to 64 | |
| pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16 | |
| pci 0000:00:02.0: setting latency timer to 64 | |
| pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 20 | |
| pci 0000:00:03.0: setting latency timer to 64 | |
| pci_bus 0000:00: resource 0 [io 0x0000-0xffff] | |
| pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] | |
| pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff] | |
| NET: Registered protocol family 2 | |
| IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) | |
| TCP established hash table entries: 262144 (order: 10, 4194304 bytes) | |
| TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) | |
| TCP: Hash tables configured (established 262144 bind 65536) | |
| TCP reno registered | |
| UDP hash table entries: 4096 (order: 5, 131072 bytes) | |
| UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:00.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:01.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:02.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:03.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:0e.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:0e.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:0e.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:0e.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:0f.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:0f.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:0f.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:0f.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:13.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:13.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:14.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:14.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:16.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:16.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:16.0: can't find IRQ for PCI INT A; probably buggy MP table | |
| pci 0000:00:16.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:17.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:17.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:17.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:17.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:18.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:18.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x153 | |
| pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xa8 | |
| pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x22 | |
| pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x650 | |
| pci 0000:01:00.0: calling pci_fixup_video+0x0/0xa8 | |
| PCI: CLS 64 bytes, default 64 | |
| Trying to unpack rootfs image as initramfs... | |
| Freeing initrd memory: 19104k freed | |
| PCI-DMA: Using software bounce buffering for IO (SWIOTLB) | |
| Placing 64MB software IO TLB between ffff88007b145000 - ffff88007f145000 | |
| software IO TLB at phys 0x7b145000 - 0x7f145000 | |
| platform rtc_cmos: registered platform RTC device (no PNP device found) | |
| squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| JFFS2 version 2.2. (NAND) (SUMMARY) 穢 2001-2006 Red Hat, Inc. | |
| msgmni has been set to 15929 | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) | |
| io scheduler noop registered | |
| io scheduler deadline registered | |
| io scheduler cfq registered (default) | |
| Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled | |
| serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A | |
| serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A | |
| Non-volatile memory driver v1.3 | |
| brd: module loaded | |
| loop: module loaded | |
| ahci 0000:00:17.0: version 3.0 | |
| ahci 0000:00:17.0: PCI->APIC IRQ transform: INT A -> IRQ 19 | |
| ahci 0000:00:17.0: irq 40 for MSI/MSI-X | |
| ahci 0000:00:17.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode | |
| ahci 0000:00:17.0: flags: 64bit ncq led clo pio apst | |
| ahci 0000:00:17.0: setting latency timer to 64 | |
| scsi0 : ahci | |
| scsi1 : ahci | |
| scsi2 : ahci | |
| scsi3 : ahci | |
| ata1: SATA max UDMA/133 abar m2048@0xdff86000 port 0xdff86100 irq 40 | |
| ata2: SATA max UDMA/133 abar m2048@0xdff86000 port 0xdff86180 irq 40 | |
| ata3: SATA max UDMA/133 abar m2048@0xdff86000 port 0xdff86200 irq 40 | |
| ata4: SATA max UDMA/133 abar m2048@0xdff86000 port 0xdff86280 irq 40 | |
| ahci 0000:00:18.0: PCI->APIC IRQ transform: INT A -> IRQ 19 | |
| ahci 0000:00:18.0: irq 41 for MSI/MSI-X | |
| ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode | |
| ahci 0000:00:18.0: flags: 64bit ncq led clo pio apst | |
| ahci 0000:00:18.0: setting latency timer to 64 | |
| scsi4 : ahci | |
| scsi5 : ahci | |
| ata5: SATA max UDMA/133 abar m2048@0xdff85000 port 0xdff85100 irq 41 | |
| ata6: SATA max UDMA/133 abar m2048@0xdff85000 port 0xdff85180 irq 41 | |
| e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI | |
| e1000: Copyright (c) 1999-2006 Intel Corporation. | |
| e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k | |
| e1000e: Copyright(c) 1999 - 2011 Intel Corporation. | |
| Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k | |
| Copyright (c) 2007-2011 Intel Corporation. | |
| igb 0000:00:14.0: PCI->APIC IRQ transform: INT A -> IRQ 20 | |
| igb 0000:00:14.0: setting latency timer to 64 | |
| igb 0000:00:14.0: irq 42 for MSI/MSI-X | |
| igb 0000:00:14.0: irq 43 for MSI/MSI-X | |
| igb 0000:00:14.0: irq 44 for MSI/MSI-X | |
| igb 0000:00:14.0: irq 45 for MSI/MSI-X | |
| igb 0000:00:14.0: irq 46 for MSI/MSI-X | |
| igb 0000:00:14.0: irq 47 for MSI/MSI-X | |
| igb 0000:00:14.0: irq 48 for MSI/MSI-X | |
| igb 0000:00:14.0: irq 49 for MSI/MSI-X | |
| igb 0000:00:14.0: irq 50 for MSI/MSI-X | |
| ata4: SATA link down (SStatus 0 SControl 300) | |
| ata2: SATA link down (SStatus 0 SControl 300) | |
| ata1: SATA link down (SStatus 0 SControl 300) | |
| ata3: SATA link down (SStatus 0 SControl 300) | |
| ata6: SATA link down (SStatus 0 SControl 300) | |
| ata5: SATA link down (SStatus 0 SControl 300) | |
| igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection | |
| igb 0000:00:14.0: eth0: (PCIe:unknown:unknown) 00:00:e8:a0:00:00 | |
| igb 0000:00:14.0: eth0: PBA No: 002000-000 | |
| igb 0000:00:14.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci_hcd 0000:00:16.0: can't find IRQ for PCI INT A; probably buggy MP table | |
| ehci_hcd 0000:00:16.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:16.0 setup! | |
| ehci_hcd 0000:00:16.0: init 0000:00:16.0 fail, -19 | |
| uhci_hcd: USB Universal Host Controller Interface driver | |
| Initializing USB Mass Storage driver... | |
| usbcore: registered new interface driver usb-storage | |
| USB Mass Storage support registered. | |
| usbcore: registered new interface driver usbserial | |
| usbserial: USB Serial Driver core | |
| rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 | |
| rtc0: alarms up to one day, 114 bytes nvram | |
| i2c /dev entries driver | |
| i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003) | |
| i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 18 | |
| ismt_smbus 0000:00:13.0: enabling device (0000 -> 0002) | |
| ismt_smbus 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 16 | |
| ismt_smbus 0000:00:13.0: enabling bus mastering | |
| ismt_smbus 0000:00:13.0: setting latency timer to 64 | |
| ismt_smbus 0000:00:13.0: irq 51 for MSI/MSI-X | |
| md: linear personality registered for level -1 | |
| md: raid0 personality registered for level 0 | |
| md: raid1 personality registered for level 1 | |
| md: raid10 personality registered for level 10 | |
| md: raid6 personality registered for level 6 | |
| md: raid5 personality registered for level 5 | |
| md: raid4 personality registered for level 4 | |
| device-mapper: uevent: version 1.0.3 | |
| device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com | |
| cpuidle: using governor ladder | |
| sdhci: Secure Digital Host Controller Interface driver | |
| sdhci: Copyright(c) Pierre Ossman | |
| sdhci-pltfm: SDHCI platform and OF driver helper | |
| oprofile: using NMI interrupt. | |
| TCP bic registered | |
| TCP cubic registered | |
| TCP westwood registered | |
| TCP htcp registered | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 10 | |
| Mobile IPv6 | |
| IPv6 over IPv4 tunneling driver | |
| NET: Registered protocol family 17 | |
| NET: Registered protocol family 15 | |
| 8021q: 802.1Q VLAN Support v1.8 | |
| Registering the dns_resolver key type | |
| console [netcon0] enabled | |
| netconsole: network logging started | |
| rtc_cmos rtc_cmos: setting system clock to 2001-01-01 00:02:41 UTC (978307361) | |
| Freeing unused kernel memory: 516k freed | |
| Write protecting the kernel read-only data: 8192k | |
| Freeing unused kernel memory: 1672k freed | |
| Freeing unused kernel memory: 548k freed | |
| Switching to clocksource tsc | |
| ADDRCONF(NETDEV_UP): eth0: link is not ready | |
| 8021q: adding VLAN 0 to HW filter on device eth0 | |
| igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX | |
| ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | |
| eth0: no IPv6 routers present | |
| ONIE-RECOVERY:/ # | |
| ONIE-RECOVERY:/ # onie-self-update -e /lib/onie/onie-updater | |
| discover: Rescue mode detected. No discover stopped. | |
| ONIE: Executing installer: /lib/onie/onie-updater | |
| Verifying image checksum ... OK. | |
| Preparing image archive ... OK. | |
| + [ -r ./installer.conf ] | |
| + . ./installer.conf | |
| + description=Accton, as5712_54x | |
| + [ -r ./machine.conf ] | |
| + . ./machine.conf | |
| + image_version=2015.6.2-dirty | |
| + image_vendor_id=259 | |
| + image_platform=x86_64-accton_as5712_54x-r0 | |
| + image_machine=accton_as5712_54x | |
| + image_machine_rev=0 | |
| + image_arch=x86_64 | |
| + image_config_version=1 | |
| + image_build_date=2015-06-02T11:16+0800 | |
| + image_partition_type=gpt | |
| + image_kernel_version=3.2.35 | |
| + image_firmware=bios | |
| + [ -r /etc/machine.conf ] | |
| + . /etc/machine.conf | |
| + onie_version=2015.6.2-dirty | |
| + onie_vendor_id=259 | |
| + onie_platform=x86_64-accton_as5712_54x-r0 | |
| + onie_machine=accton_as5712_54x | |
| + onie_machine_rev=0 | |
| + onie_arch=x86_64 | |
| + onie_config_version=1 | |
| + onie_build_date=2015-06-02T11:16+0800 | |
| + onie_partition_type=gpt | |
| + onie_kernel_version=3.2.35 | |
| + onie_firmware=bios | |
| + args_arch=d: | |
| + cat | |
| + usage_arch= -d | |
| Target ONIE install device. Must be a valid block device. | |
| + [ -r /etc/machine.conf ] | |
| + . /etc/machine.conf | |
| + onie_version=2015.6.2-dirty | |
| + onie_vendor_id=259 | |
| + onie_platform=x86_64-accton_as5712_54x-r0 | |
| + onie_machine=accton_as5712_54x | |
| + onie_machine_rev=0 | |
| + onie_arch=x86_64 | |
| + onie_config_version=1 | |
| + onie_build_date=2015-06-02T11:16+0800 | |
| + onie_partition_type=gpt | |
| + onie_kernel_version=3.2.35 | |
| + onie_firmware=bios | |
| + true 0 | |
| + true 1 | |
| + args=hvfxd: | |
| + verbose=no | |
| + force=no | |
| + getopts hvfxd: a | |
| + [ -r ./install-platform ] | |
| + . ./install-platform | |
| + fail= | |
| + check_machine_image | |
| + [ accton_as5712_54x != accton_as5712_54x ] | |
| + [ 0 != 0 ] | |
| + [ x86_64 != x86_64 ] | |
| + [ = yes ] | |
| + [ -r onie-update.tar.xz ] | |
| + echo ONIE: Version : 2015.6.2-dirty | |
| ONIE: Version : 2015.6.2-dirty | |
| + echo ONIE: Architecture : x86_64 | |
| ONIE: Architecture : x86_64 | |
| + echo ONIE: Machine : accton_as5712_54x | |
| ONIE: Machine : accton_as5712_54x | |
| + echo ONIE: Machine Rev : 0 | |
| ONIE: Machine Rev : 0 | |
| + echo ONIE: Config Version: 1 | |
| ONIE: Config Version: 1 | |
| + xz -d -c onie-update.tar.xz | |
| + tar -xf - | |
| + install_onie | |
| + init_onie_install | |
| + install_device_platform | |
| + eusb_bus=1-1.4:1.0 | |
| + eusb_dev=/dev/sdz | |
| + ls -l /sys/block/sda | |
| + grep -q 1-1.4:1.0 | |
| + | |
| + ls -l /sys/block/sdb | |
| + grep -q 1-1.4:1.0 | |
| + | |
| + ls -l /sys/block/sdc | |
| + grep -q 1-1.4:1.0 | |
| + | |
| + ls -l /sys/block/sdd | |
| + grep -q 1-1.4:1.0 | |
| + | |
| + ls -l /sys/block/sde | |
| + grep -q 1-1.4:1.0 | |
| + | |
| + echo /dev/sdz | |
| + onie_dev=/dev/sdz | |
| + [ 0 -eq 0 ] | |
| + [ -b /dev/sdz ] | |
| + echo ERROR: Invalid ONIE install device: /dev/sdz | |
| ERROR: Invalid ONIE install device: /dev/sdz | |
| + exit 1 | |
| ONIE-RECOVERY:/ # ls /sys/firmware/ | |
| memmap | |
| ONIE-RECOVERY:/ # ls /sys/block/ | |
| loop0 loop2 loop4 loop6 ram0 ram10 ram12 ram14 ram16 ram3 ram5 ram7 ram9 | |
| loop1 loop3 loop5 loop7 ram1 ram11 ram13 ram15 ram2 ram4 ram6 ram8 | |
| ONIE-RECOVERY:/ # cat /etc/machine.conf | |
| onie_version=2015.6.2-dirty | |
| onie_vendor_id=259 | |
| onie_platform=x86_64-accton_as5712_54x-r0 | |
| onie_machine=accton_as5712_54x | |
| onie_machine_rev=0 | |
| onie_arch=x86_64 | |
| onie_config_version=1 | |
| onie_build_date="2015-06-02T11:16+0800" | |
| onie_partition_type=gpt | |
| onie_kernel_version=3.2.35 | |
| onie_firmware=bios | |
| ONIE-RECOVERY:/ # |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment