iKirby iKirby

Debian 13

Caution Upgrading from Debian 12 to Debian 13 on machines with mdadm has intermittently failed for me; symptom is that grub EFI is not up to date and system boots into BIOS. Root cause under investigation; it might not be related to mdadm.

To start, read the official release notes.

If your install fits into "vanilla Debian plus maybe a handful of 3rd-party repos", then this guide for a simple upgrade to Debian 13 "trixie" from Debian 12 "bookworm" can be helpful. 3rd-party repos are handled with a find command.

Note upgrade is only supported from Debian 12 to Debian 13. If you are on Debian 11, upgrade to Debian 12 first. Then once on Debian 12, you can upgrade to Debian 13.

Fix magisk stock backup does not exist

# put stock boot.img into /sdcard/boot.img

# get sha1
adb shell
su
SHA1=$(cat $(magisk --path)/.magisk/config | grep SHA1 | cut -d '=' -f 2)

	Mute these words in your settings here: https://twitter.com/settings/muted_keywords

	ActivityTweet
	generic_activity_highlights
	generic_activity_momentsbreaking
	RankedOrganicTweet
	suggest_activity
	suggest_activity_feed
	suggest_activity_highlights
	suggest_activity_tweet

	@echo off
	REM 注意：此脚本需要在执行的计算机具备UPS为前提的条件下进行，且目标IP设备不能具有UPS。
	REM 此批处理可以检测目标IP是否因为停电而失效，一旦失效则在180秒后关机。
	REM 需将此批处理写入计划任务才能使用，建议每隔60秒执行一次。
	REM 若不知道如何配置计划任务，请参阅 https://twitter.com/chenshaoju/status/973109556640333825
	REM 若参照60秒执行一次的话，在120至180秒内若恢复供电（能Ping通），则会取消关机。
	REM 若路由器或需要检测的目标IP不是 192.168.1.1 ，请手动修改下方的 192.168.1.1 IP地址。
	REM 关机等待时间不建议设置太短，避免手动开机但目标IP未启动时又立刻自动关机。

	REM 若只需要监控一个设备（默认），请勿注释下一行。

	#!/system/bin/sh

	# 使用方法:
	# adb shell "curl -Ssl https://gist.githubusercontent.com/kookxiang/1104e898f270c9a7a0784f70979ec532/raw/hackQQ.sh \| su"

	# 使用方法 (手动):
	# 0.确保你手机 Root 了
	# 1.下载这个脚本到某个地方
	# 2.下载 Android SDK（需要其中的 adb）
	# 3.在命令行运行 adb devices，确保能看到你的手机

	<button id="load-disqus" onclick="disqus.load();">
	加载Disqus
	</button>

	<div id="disqus_thread"></div>

	//wearversion
	//wearlog
	//wearvoiceinputenable
	//wearvoiceinputdisable
	//weargoogleapi
	//assert
	//pushassert
	//uplog
	//upcrash
	//switchnotificationstatus

	git config --global https.proxy http://127.0.0.1:1080

	git config --global https.proxy https://127.0.0.1:1080

	git config --global --unset http.proxy

	git config --global --unset https.proxy


	npm config delete proxy

	#
	# /etc/sysctl.conf - Configuration file for setting system variables
	# See /etc/sysctl.d/ for additonal system variables
	# See sysctl.conf (5) for information.
	#

	#kernel.domainname = example.com

	# Uncomment the following to stop low-level messages on console
	#kernel.printk = 3 4 1 3