Skip to content

Instantly share code, notes, and snippets.

@inoperable

inoperable/gist:dac3e97df5970dcc186638c86dedc5d4

Created March 10, 2026 16:55
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save inoperable/dac3e97df5970dcc186638c86dedc5d4 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save inoperable/dac3e97df5970dcc186638c86dedc5d4 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.txt

F0: 102B 0000
FA: 1040 0000
FA: 1040 0000 [0200]
F9: 0000 0000
V0: 0000 0000 [0001]
00: 0000 0000
BP: 2400 0041 [0000]
G0: 1190 0000
EC: 0000 0000 [1000]
T0: 0000 0154 [010F]
Jump to BL
NOTICE: BL2: v2.7(release):63a7fb842d-dirty
NOTICE: BL2: Built : 16:44:33, Aug 4 2025
NOTICE: WDT: disabled
NOTICE: EMI: Using DDR3 settings
dump toprgu registers data:
1001c000 | 00000000 0000ffe0 00000000 00000000
1001c010 | 00000fff 00000000 00f00000 00000000
1001c020 | 00000000 00000000 00000000 00000000
1001c030 | 003c0003 003c0003 00000000 00000000
1001c040 | 00000000 00000000 00000000 00000000
1001c050 | 00000000 00000000 00000000 00000000
1001c060 | 00000000 00000000 00000000 00000000
1001c070 | 00000000 00000000 00000000 00000000
1001c080 | 00000000 00000000 00000000 00000000
dump drm registers data:
1001d000 | 00000000 00000000 00000000 00000000
1001d010 | 00000000 00000000 00000000 00000000
1001d020 | 00000000 00000000 00000000 00000000
1001d030 | 00a083f1 000003ff 00100000 00000000
1001d040 | 00000000 00000000 00020303 000000ff
1001d050 | 00000000 00000000 00000000 00000000
1001d060 | 00000002 00000000 00000000 00000000
drm: 500 = 0x8
[DDR Reserve] ddr reserve mode not be enabled yet
DDR RESERVE Success 0
[EMI] ComboMCP not ready, using default setting
BYTE_swap:0
BYTE_swap:0
Window Sum 656, worse bit 0, min window 80
Window Sum 648, worse bit 8, min window 80
Window Sum 410, worse bit 1, min window 50
Window Sum 418, worse bit 11, min window 50
Window Sum 422, worse bit 6, min window 50
Window Sum 430, worse bit 15, min window 50
Window Sum 430, worse bit 1, min window 50
Window Sum 442, worse bit 9, min window 52
Window Sum 438, worse bit 6, min window 50
Window Sum 454, worse bit 9, min window 54
Window Sum 450, worse bit 1, min window 52
Window Sum 458, worse bit 12, min window 56
Window Sum 460, worse bit 1, min window 56
Window Sum 472, worse bit 14, min window 56
Window Sum 468, worse bit 1, min window 56
Window Sum 480, worse bit 9, min window 58
Window Sum 484, worse bit 4, min window 58
Window Sum 490, worse bit 11, min window 58
Window Sum 496, worse bit 5, min window 58
Window Sum 502, worse bit 14, min window 60
Window Sum 502, worse bit 5, min window 60
Window Sum 518, worse bit 13, min window 62
Window Sum 514, worse bit 3, min window 62
Window Sum 524, worse bit 8, min window 64
Window Sum 522, worse bit 6, min window 62
Window Sum 532, worse bit 8, min window 64
Window Sum 534, worse bit 14, min window 64
NOTICE: EMI: Detected DRAM size: 512MB
NOTICE: EMI: complex R/W mem test passed
NOTICE: CPU: MT7981 (1300MHz)
NOTICE: SPI_NAND parses attributes from parameter page.
NOTICE: SPI_NAND Detected ID 0xc8
NOTICE: Page size 2048, Block size 131072, size 134217728
NOTICE: BL2: Booting BL31
NOTICE: BL31: v2.7(release):63a7fb842d-dirty
NOTICE: BL31: Built : 16:44:36, Aug 4 2025
NOTICE: Hello BL31!!!
U-Boot 2022.07-rc3 (Aug 04 2025 - 16:44:23 +0800)
CPU: MediaTek MT7981
Model: mt7981-rfb
DRAM: 512 MiB
Core: 32 devices, 13 uclasses, devicetree: embed
MMC:
Loading Environment from MTD... spi-nand: spi_nand spi_nand@0: GigaDevice SPI NAND was found.
spi-nand: spi_nand spi_nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
OK
In: serial@11002000
Out: serial@11002000
Err: serial@11002000
Net: >>>>>> entering rtl8367s probe
>>>>>> rtl8367s reset gpio=39
switch debug=========switchChip:0
>>>>>> rtl8367s_hw_init success!!!
>>>>>> set_rtl8367s_sgmii mode = 10 success!!!
>>>>>> rtl8367s init done!!!
eth0: ethernet@15100000
press ctrl-c or t to go to uboot cmdline
 0 [7.566][ AginetConfigProcess ] 641 - ERROR: NOT FIND AGC PACKET
new bootarg:ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit
ubi0: attaching mtd3
ubi0: scanning is finished
ubi0: attached mtd3 (name "ubi0", size 50 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 780551586
ubi0: available PEBs: 162, total reserved PEBs: 238, PEBs reserved for bad PEB handling: 20
Reading from volume 'uboot' to 0x41dfffc0, size 0x0 ... OK
Reading from volume 'rootfs' to 0x4a000000, size 0x0 ... OK
Reading from volume 'kernel' to 0x46000000, size 0x0 ... OK
## Booting kernel from Legacy Image at 41dfffc0 ...
Image Name: seconduboot
Image Type: ARM Linux Standalone Program (uncompressed)
Data Size: 1143528 Bytes = 1.1 MiB
Load Address: 00000000
Entry Point: 41e00000
Verifying Checksum ... OK
Loading Standalone Program
U-Boot 2022.07-rc3 (Feb 28 2025 - 11:00:03 +0800)
CPU: MediaTek MT7981
Model: mt7981-rfb
DRAM: 512 MiB
Core: 32 devices, 13 uclasses, devicetree: embed
MMC:
Loading Environment from MTD... spi-nand: spi_nand spi_nand@0: GigaDevice SPI NAND was found.
spi-nand: spi_nand spi_nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
OK
In: serial@11002000
Out: serial@11002000
Err: serial@11002000
Net: >>>>>> entering rtl8367s probe
>>>>>> rtl8367s reset gpio=39
switch debug=========switchChip:0
>>>>>> rtl8367s_hw_init success!!!
>>>>>> set_rtl8367s_sgmii mode = 10 success!!!
>>>>>> rtl8367s init done!!!
eth0: ethernet@15100000
new bootarg:ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit
second uboot to boot kernel @46000000
## Loading kernel from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-5.4.124
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x460000e8
Data Size: 3326226 Bytes = 3.2 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x48080000
Entry Point: 0x48080000
Hash algo: crc32
Hash value: 07e2b66f
Hash algo: sha1
Hash value: 1b1e02f00a93e3e972e36c34fa90ca41c49fd96e
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
Using 'config-1' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt mt7981-spim-nand-rfb device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x4632c340
Data Size: 18470 Bytes = 18 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: ac3f53d9
Hash algo: sha1
Hash value: d22447f6b820efdaa23868ab28ea51c68cee21e6
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x4632c340
Uncompressing Kernel Image
Loading Device Tree to 000000005f7f3000, end 000000005f7fa825 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.124 (jenkins@dca3ad4d0089) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r0-c067e3725)) #0 SMP Thu Aug 3 03:49:41 2023
[ 0.000000] Machine model: MediaTek MT7981 RFB
[ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '')
[ 0.000000] printk: bootconsole [uart8250] enabled
[ 0.000000] On node 0 totalpages: 130128
[ 0.000000] DMA32 zone: 2048 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 130128 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 20 pages/cpu s44248 r8192 d29480 u81920
[ 0.000000] pcpu-alloc: s44248 r8192 d29480 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128080
[ 0.000000] Kernel command line: ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 492144K/520512K available (6718K kernel code, 462K rwdata, 1920K rodata, 448K init, 286K bss, 28368K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 640 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[ 0.000000] random: get_random_bytes called from start_kernel+0x2ec/0x438 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[ 0.000004] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[ 0.008183] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[ 0.018592] pid_max: default: 32768 minimum: 301
[ 0.023310] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.030663] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.039321] ASID allocator initialised with 65536 entries
[ 0.044821] rcu: Hierarchical SRCU implementation.
[ 0.049918] smp: Bringing up secondary CPUs ...
[ 0.054731] Detected VIPT I-cache on CPU1
[ 0.054752] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[ 0.054778] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.054862] smp: Brought up 1 node, 2 CPUs
[ 0.076462] SMP: Total of 2 processors activated.
[ 0.081184] CPU features: detected: 32-bit EL0 Support
[ 0.086341] CPU features: detected: CRC32 instructions
[ 0.091616] CPU: All CPU(s) started at EL2
[ 0.095732] alternatives: patching kernel code
[ 0.102667] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.112574] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.119472] pinctrl core: initialized pinctrl subsystem
[ 0.125317] NET: Registered protocol family 16
[ 0.130004] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.136633] cpuidle: using governor ladder
[ 0.140774] cpuidle: using governor menu
[ 0.156846] cryptd: max_cpu_qlen set to 1000
[ 0.162813] SCSI subsystem initialized
[ 0.166725] libata version 3.00 loaded.
[ 0.170716] usbcore: registered new interface driver usbfs
[ 0.176287] usbcore: registered new interface driver hub
[ 0.181666] usbcore: registered new device driver usb
[ 0.187070] nvmem nvmem0: cell usb3-intr unaligned to nvmem stride 4
[ 0.193611] mediatek,efuse: probe of 11f20000.efuse failed with error -22
[ 0.200655] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[ 0.211011] rbus 18000000.wbsys: PCI host bridge to bus 0000:00
[ 0.216998] pci_bus 0000:00: root bus resource [mem 0x18000000-0x18ffffff]
[ 0.223905] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.229427] pci_bus 0000:00: scanning bus
[ 0.233471] pci 0000:00:00.0: [14c3:7981] type 00 class 0x000280
[ 0.239517] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x1800000f 64bit]
[ 0.246336] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0000000f]
[ 0.252635] pci 0000:00:00.0: reg 0x1c: [mem 0x00000000-0x0000000f]
[ 0.258930] pci 0000:00:00.0: reg 0x20: [mem 0x00000000-0x0000000f]
[ 0.265228] pci 0000:00:00.0: reg 0x24: [mem 0x00000000-0x0000000f]
[ 0.272382] pci_bus 0000:00: fixups for bus
[ 0.276592] pci_bus 0000:00: bus scan returning with max=00
[ 0.282547] clocksource: Switched to clocksource arch_sys_counter
[ 0.289271] thermal_sys: Registered thermal governor 'fair_share'
[ 0.289274] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.295417] thermal_sys: Registered thermal governor 'step_wise'
[ 0.301449] thermal_sys: Registered thermal governor 'user_space'
[ 0.307484] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.313854] NET: Registered protocol family 2
[ 0.324874] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.332584] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.340985] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.348817] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.356036] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.362483] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.369056] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.376160] NET: Registered protocol family 1
[ 0.380555] PCI: CLS 0 bytes, default 64
[ 0.385322] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.394945] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.400809] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.423969] phy phy-usb-phy@11e10000.1: type_sw - reg 0x218, index 0
[ 0.439386] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 0.446559] printk: console [ttyS0] disabled
[ 0.470969] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 12, base_baud = 2500000) is a ST16650V2
[ 0.480181] printk: console [ttyS0] enabled
[ 0.480181] printk: console [ttyS0] enabled
[ 0.488541] printk: bootconsole [uart8250] disabled
[ 0.488541] printk: bootconsole [uart8250] disabled
[ 0.498925] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.507341] loop: module loaded
[ 0.510605] mediatek,mt2701-ice_debug ice_debug: get dbg_sel clock fail: -2
[ 0.517594] mediatek,mt2701-ice_debug: probe of ice_debug failed with error -2
[ 0.525628] mt7981-pinctrl 11d00000.pinctrl: pin_config_set op failed for pin 19
[ 0.533033] mtk-spi 1100a000.spi: Error applying setting, reverse things back
[ 0.540738] No nand flash found, try esmt
[ 0.544788] spi-nand spi0.0: ESMT SPI NAND was found.
[ 0.549829] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
[ 0.558171] 6 fixed-partitions partitions found on MTD device spi0.0
[ 0.564529] Creating 6 MTD partitions on "spi0.0":
[ 0.569309] 0x000000000000-0x000000200000 : "boot"
[ 0.576508] 0x000000200000-0x000000300000 : "u-boot-env"
[ 0.583319] 0x000000300000-0x000003500000 : "ubi0"
[ 0.588989] random: fast init done
[ 0.637178] 0x000003500000-0x000006700000 : "ubi1"
[ 0.688039] 0x000006700000-0x000006f00000 : "userconfig"
[ 0.701429] 0x000006f00000-0x000007700000 : "tp_data"
[ 0.715280] libphy: Fixed MDIO Bus: probed
[ 0.719934] [mtk_hw_init] reset_lock:0, force:0
[ 0.724505] [mtk_hw_init] execute fe cold reset
[ 0.760279] libphy: mdio: probed
[ 0.785825] mtk_soc_eth 15100000.ethernet: generated random MAC address 0e:71:e6:65:ee:c1
[ 0.794400] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc011700000, irq 75
[ 0.803482] mtk_soc_eth 15100000.ethernet: generated random MAC address ce:1f:0b:4a:05:2d
[ 0.811925] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc011700000, irq 75
[ 0.820974] (unnamed net_device) (dummy): netif_napi_add() called with weight 256
[ 0.828796] xhci-mtk 11200000.xhci: 11200000.xhci supply vbus not found, using dummy regulator
[ 0.837457] xhci-mtk 11200000.xhci: 11200000.xhci supply vusb33 not found, using dummy regulator
[ 0.846568] xhci-mtk 11200000.xhci: xHCI Host Controller
[ 0.851886] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus number 1
[ 0.862369] xhci-mtk 11200000.xhci: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000210010
[ 0.871621] xhci-mtk 11200000.xhci: irq 85, io mem 0x11200000
[ 0.877841] hub 1-0:1.0: USB hub found
[ 0.881607] hub 1-0:1.0: 1 port detected
[ 0.885765] xhci-mtk 11200000.xhci: xHCI Host Controller
[ 0.891073] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus number 2
[ 0.898564] xhci-mtk 11200000.xhci: Host supports USB 3.2 Enhanced SuperSpeed
[ 0.905745] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.914192] hub 2-0:1.0: USB hub found
[ 0.917959] hub 2-0:1.0: 1 port detected
[ 0.922245] usbcore: registered new interface driver usb-storage
[ 0.928391] i2c /dev entries driver
[ 0.932425] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 0.940415] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 0.949809] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433,alg:7fcdfc00
[ 0.962366] exFAT: Version 1.3.0
[ 0.967097] GACT probability on
[ 0.970239] Mirror/redirect action on
[ 0.973927] u32 classifier
[ 0.976621] input device check on
[ 0.980268] Actions configured
[ 0.983767] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 0.989573] gre: GRE over IPv4 demultiplexor driver
[ 0.994450] ip_gre: GRE over IPv4 tunneling driver
[ 1.000115] Initializing XFRM netlink socket
[ 1.004749] NET: Registered protocol family 10
[ 1.010158] Segment Routing with IPv6
[ 1.013918] NET: Registered protocol family 17
[ 1.018413] Bridge firewalling registered
[ 1.022500] 8021q: 802.1Q VLAN Support v1.8
[ 1.036279] ubi0: attaching mtd2
[ 1.182293] random: crng init done
[ 1.201510] ubi0: scanning is finished
[ 1.210524] ubi0: attached mtd2 (name "ubi0", size 50 MiB)
[ 1.216016] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.222884] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.229655] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.236605] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
[ 1.242601] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 1.249806] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 780551586
[ 1.258837] ubi0: available PEBs: 162, total reserved PEBs: 238, PEBs reserved for bad PEB handling: 20
[ 1.268222] ubi0: background thread "ubi_bgt0d" started, PID 693
[ 3.532575] block ubiblock0_2: created from ubi0:2(rootfs)
[ 3.538053] ubiblock: device ubiblock0_2 (rootfs) set to be root filesystem
[ 3.545010] hctosys: unable to open rtc device (rtc0)
[ 3.550616] UBIFS (ubi0:2): static UBI volume - read-only mode
[ 3.556472] UBIFS error (ubi0:2 pid 1): ubifs_mount: cannot mount read-write - read-only media
[ 3.566924] VFS: Mounted root (squashfs filesystem) readonly on device 253:0.
[ 3.574375] Freeing unused kernel memory: 448K
[ 3.612597] Run /etc/preinit as init process
- preinit -
- regular preinit -
jffs2 not ready yet; using ramdisk
ubi device is not attached, try to attach it now.
[ 6.627941] ubi1: attaching mtd5
[ 6.656424] ubi1: scanning is finished
[ 6.665216] ubi1: attached mtd5 (name "tp_data", size 8 MiB)
[ 6.670867] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 6.677756] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 6.684535] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 6.691480] ubi1: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
[ 6.697390] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 6.704601] ubi1: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 883483460
[ 6.713632] ubi1: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 10
[ 6.722761] ubi1: background thread "ubi_bgt1d" started, PID 1065
[ 6.737837] UBIFS (ubi1:0): Mounting in unauthenticated mode
[ 6.743585] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 1071
[ 6.798615] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "tp_data"
[ 6.806118] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.816022] UBIFS (ubi1:0): FS size: 5079040 bytes (4 MiB, 40 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 6.826099] UBIFS (ubi1:0): reserved for root: 239895 bytes (234 KiB)
[ 6.832527] UBIFS (ubi1:0): media format: w5/r0 (latest is w5/r0), UUID F380DD9B-A7BC-4783-A5DC-2F8AD666232D, small LPT model
[USERDATA]: Foun[ 6.851987] ubi2: attaching mtd4
d userconfig partition on MTD devide 4, attach it.
[ 6.880640] ubi2: scanning is finished
[ 6.889669] ubi2: attached mtd4 (name "userconfig", size 8 MiB)
[ 6.895600] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 6.902459] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 6.909237] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 6.916186] ubi2: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
[ 6.922090] ubi2: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 6.929300] ubi2: max/mean erase counter: 13/6, WL threshold: 4096, image sequence number: 1012469910
[ 6.938504] ubi2: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 20
[ 6.947631] ubi2: background thread "ubi_bgt2d" started, PID 1075
[USERDATA]: MTD4 attach succ.
[USERDATA]: Mounting user_data1 UBI volume as UB[ 6.962415] UBIFS (ubi2:0): Mounting in unauthenticated mode
IFS
[ 6.968528] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1080
[ 7.032814] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "user_data1"
[ 7.040549] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.050459] UBIFS (ubi2:0): FS size: 1269760 bytes (1 MiB, 10 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
[ 7.060624] UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB)
[ 7.066450] UBIFS (ubi2:0): media format: w4/r0 (latest is w5/r0), UUID 9C59C32F-388F-4646-B9DF-57FDA37E5A6C, small LPT model
[USERDATA]: Mounting user_data2 UBI volume as UB[ 7.088505] UBIFS (ubi2:1): Mounting in unauthenticated mode
IFS
[ 7.095137] UBIFS (ubi2:1): background thread "ubifs_bgt2_1" started, PID 1085
[ 7.146520] UBIFS (ubi2:1): UBIFS: mounted UBI device 2, volume 1, name "user_data2"
[ 7.154282] UBIFS (ubi2:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.164185] UBIFS (ubi2:1): FS size: 1269760 bytes (1 MiB, 10 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
[ 7.174345] UBIFS (ubi2:1): reserved for root: 0 bytes (0 KiB)
[ 7.180166] UBIFS (ubi2:1): media format: w4/r0 (latest is w5/r0), UUID 9E5C96C1-69B2-4894-B931-09237FB73843, small LPT model
- init -
Please press Enter to activate this console. [ 7.274854] MTD: MTD device with name "data" not found
[ 7.279991] MTD: Couldn't look up 'mtd:data': -2
[ 7.320668] liblog: module license 'unspecified' taints kernel.
[ 7.326600] Disabling lock debugging due to kernel taint
[ 9.017700] Airoha EN8811H mdio-bus:0f: PHY = 3a2 - a411
[ 9.023215] Airoha EN8811H mdio-bus:0f: Bootmode: Download Code
[ 9.030223] Airoha EN8811H mdio-bus:0f: EthMD32.dm.bin: crc32=0x3b7f8592
[ 9.269945] Airoha EN8811H mdio-bus:0f: EthMD32.DSP.bin: crc32=0xa00b9f5d
[ 11.438865] Airoha EN8811H mdio-bus:0f: EN8811H PHY ready!
[ 11.444814] Airoha EN8811H mdio-bus:0f: en8811h_of_init: start
[ 11.451235] Airoha EN8811H mdio-bus:0f: Tx, Rx Polarity : 01a01501
[ 11.457605] Airoha EN8811H mdio-bus:0f: MD32 FW Version : 24111202
[ 11.463775] Airoha EN8811H mdio-bus:0f: surge protection mode - 0R
[ 11.470336] Airoha EN8811H mdio-bus:0f: CKO Output mode - Disabled
[ 11.479402] Airoha EN8811H mdio-bus:0f: LED initialize OK !
[ 11.484965] Airoha EN8811H mdio-bus:0f: EN8811H initialize OK! (v1.2.6)
[ 11.563276] >>>>>> entering rtl8367s probe
[ 11.567398] >>>>>> rtl8367s reset gpio=39
[ 13.722084] >>>>>> rtl8367s_hw_init success!!!
[ 13.876571] >>>>>> set_rtl8367s_sgmii mode = 21 success!!!
[ 13.899991] >>>>>> Register swconfig for RTL8367s done
[ 13.905144] >>>>>> rtl8367s init done!!!
[ 14.006255] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 14.095410] NET: Registered protocol family 15
[ 14.109737] PPP generic driver version 2.4.2
[ 14.166685] tun: Universal TUN/TAP device driver, 1.6
[ 14.195372] PPP MPPE Compression module registered
[ 14.251706] l2tp_core: L2TP core driver, V2.0
[ 14.260692] l2tp_netlink: L2TP netlink interface
[ 14.283762] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 14.320095] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 14.350597] hyfi_bridging: Unknown symbol tp_hyfi_reg_flwstat_cb (err -2)
[ 14.357468] hyfi_bridging: Unknown symbol tp_hyfi_get_fc_flwstats (err -2)
[ 14.507830] NET: Registered protocol family 24
[ 14.517049] PPTP driver version 0.8.5
[ 14.634043] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 14.928899] nf_conntrack_rtsp v0.7 loading
[ 14.937650] nf_nat_rtsp v0.7 loading
[ 15.151796] fuse: init (API version 7.31)
[ 15.183003] wireguard: enabled KERNEL_MODE_NEON success
[ 15.188441] wireguard: WireGuard 1.0.20211208 loaded. See www.wireguard.com for information.
[ 15.196878] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 15.248766] conninfra@(mtk_conninfra_drv_init:644) Before platform_driver_register
[ 15.256513] Get Index(0-TOP_MISC_BASE) phy_addr(0x11d10000) vir_addr=(0xffffffc010aa5000) size=(0x1000)
[ 15.265906] Get Index(1-TOPRGU_BASE) phy_addr(0x1001c000) vir_addr=(0xffffffc010ac8000) size=(0x1000)
[ 15.275113] Get Index(2-GPIO_BASE) phy_addr(0x11d00000) vir_addr=(0xffffffc010aca000) size=(0x1000)
[ 15.284147] Get Index(3-IOCFG_TR_BASE) phy_addr(0x11f00000) vir_addr=(0xffffffc010acc000) size=(0x1000)
[ 15.293528] Get Index(4-IOCFG_TL_BASE) phy_addr(0x11f10000) vir_addr=(0xffffffc010adf000) size=(0x1000)
[ 15.302909] Get Index(5-INFRACFG_AO_BASE) phy_addr(0x10003000) vir_addr=(0xffffffc010ae1000) size=(0x1000)
[ 15.312552] Get Index(6-CONN_INFRA_CFG_BASE) phy_addr(0x18001000) vir_addr=(0xffffffc010ae3000) size=(0x1000)
[ 15.322448] Get Index(7-CONN_INFRA_SYSRAM_BASE) phy_addr(0x18050000) vir_addr=(0xffffffc010ae5000) size=(0x1000)
[ 15.332610] Get Index(8-CONN_INFRA_CLKGEN_ON_TOP_BASE) phy_addr(0x18009000) vir_addr=(0xffffffc010ae7000) size=(0x1000)
[ 15.343378] Get Index(9-CONN_HOST_CSR_TOP_BASE) phy_addr(0x18060000) vir_addr=(0xffffffc010ae9000) size=(0x1000)
[ 15.353540] Get Index(10-CONN_INFRA_BUS_CR_BASE) phy_addr(0x1800e000) vir_addr=(0xffffffc010b2e000) size=(0x1000)
[ 15.363794] Get Index(11-CONN_INFRA_RGU_BASE) phy_addr(0x18000000) vir_addr=(0xffffffc010b30000) size=(0x1000)
[ 15.373782] Get Index(12-CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18005000) vir_addr=(0xffffffc010b32000) size=(0x1000)
[ 15.384202] Get Index(13-INST2_CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18085000) vir_addr=(0xffffffc010b3d000) size=(0x1000)
[ 15.395144] Get Index(14-CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18004000) vir_addr=(0xffffffc010b45000) size=(0x1000)
[ 15.405565] Get Index(15-INST2_CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18084000) vir_addr=(0xffffffc010b4d000) size=(0x1000)
[ 15.416510] Get Index(16-CONN_SEMAPHORE_BASE) phy_addr(0x18070000) vir_addr=(0xffffffc010b90000) size=(0x10000)
[ 15.426584] Get Index(17-CONN_AFE_CTL_BASE) phy_addr(0x18003000) vir_addr=(0xffffffc010b55000) size=(0x1000)
[ 15.436399] Get Index(18-CONN_AFE_CTL_2ND_BASE) phy_addr(0x18083000) vir_addr=(0xffffffc010b5d000) size=(0x1000)
[ 15.446560] Get Index(19-WF_TOP_SLPPROT_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010bb0000) size=(0x10000)
[ 15.456895] Get Index(20-WF_TOP_CFG_BASE) phy_addr(0x184b0000) vir_addr=(0xffffffc010b5f000) size=(0x1000)
[ 15.466535] Get Index(21-WF_MCU_CONFIG_LS_BASE) phy_addr(0x184f0000) vir_addr=(0xffffffc010b61000) size=(0x1000)
[ 15.476696] Get Index(22-WF_MCU_BUS_CR_BASE) phy_addr(0x18400000) vir_addr=(0xffffffc010b63000) size=(0x1000)
[ 15.486596] Get Index(23-WF_MCUSYS_INFRA_BUS_FULL_U_DEBUG_CTRL_AO_BASE) phy_addr(0x18500000) vir_addr=(0xffffffc010b65000) size=(0x1000)
[ 15.498840] Get Index(24-WF_TOP_CFG_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010bd0000) size=(0x10000)
[ 15.508825] conninfra@(consys_plt_hw_init:162) adie_cfg_type = 1, one_adie_dbdc = 1
[ 15.516478] [emi_mng_init] gConEmiPhyBase = [0x47c80000] size = [0x100000] fw size = [0x100000] ops=[000000000554cfc4]
[ 15.527269] conninfra@(mtk_conninfra_drv_init:650) After platform_driver_register
[ 15.535370] ConnInfra Dev: init (0)
[ 15.540291] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000)
[ 15.550134] conninfra@(connsys_d_die_cfg:365) D-die efuse: 0x00000000
[ 15.557591] conninfra@(_connsys_a_die_cfg_7976:919) adie_idx[0], A-die CHIP ID = 0x7976, HW Version = 0x8b00
[ 15.568411] conninfra@(consys_spi_write_nolock:501) addr=0x0a00, val=0xffffffff
[ 15.576713] conninfra@(consys_spi_write_nolock:501) addr=0x04ac, val=0x0000001c
[ 15.585016] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002
[ 15.594322] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x00000000
[ 15.603627] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x43a60000
[ 15.616964] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008700b9, 0x00000000]
[ 15.628477] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002
[ 15.637793] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x23a6003a
[ 15.647105] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x63a7003a
[ 15.660444] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008700b9, 0x00000000]
[ 15.671957] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002
[ 15.681266] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x23a7003a
[ 15.690577] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x63ac003a
[ 15.703916] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008700b9, 0x00000000]
[ 15.715429] conninfra@(consys_spi_write_nolock:501) addr=0x0038, val=0x4a563b00
[ 15.723733] conninfra@(consys_spi_write_nolock:501) addr=0x065c, val=0x1d59080f
[ 15.732031] conninfra@(consys_spi_write_nolock:501) addr=0x0664, val=0x34c00fe0
[ 15.740336] conninfra@(consys_spi_write_nolock:501) addr=0x0070, val=0x88888005
[ 15.749597] conninfra@(consys_spi_write_nolock:501) addr=0x0070, val=0x00000005
[ 15.757834] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000)
[ 15.767648] conninfra@(_consys_hw_conninfra_wakeup:470) conninfra_wakeup refcnt=[0]->[1] wakeup!!
[ 15.776512] conninfra@(_consys_hw_conninfra_sleep:490) conninfra_sleep refcnt=[1]->[0] sleep!!
[ 15.785113] conninfra@(opfunc_power_on_internal:241) [Conninfra Pwr On] BT=[0] FM=[0] GPS=[0] WF=[0] CONNINFRA=[1]
[ 15.821917] mediatek_soc_hnat 15100000.hnat: wan = eth1
[ 15.827214] mediatek_soc_hnat 15100000.hnat: lan = eth0
[ 15.832426] mediatek_soc_hnat 15100000.hnat: ppd = eth0
[ 15.837645] mediatek_soc_hnat 15100000.hnat: gmac num = 2
[ 15.843037] mediatek_soc_hnat 15100000.hnat: ppe num = 1
[ 15.848822] mediatek_soc_hnat 15100000.hnat: PPE0 entry number = 8192
[ 15.865865] mediatek_soc_hnat 15100000.hnat: PPE0 hwnat start
[ 15.871662] hnat roaming work enable
[ 17.123339] conninfra@(conninfra_pwr_on:120) [conninfra_pwr_on] drv=[3]
[ 17.130883] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000)
[ 17.148749] Adie Type: 0x7976
[ 17.148751] SKU Type: 3000
[ 17.152670] conninfra@(opfunc_power_on_internal:241) [Conninfra Pwr On] BT=[0] FM=[0] GPS=[0] WF=[1] CONNINFRA=[1]
[ 17.166767] WiFi@C12L1,get_dbg_setting_by_profile() 4359: debug level setting=INDEX0_debug_level not found!!
[ 17.176601] WiFi@C12L1,get_dbg_setting_by_profile() 4382: debug option setting=INDEX0_debug_option not found!!
[ 17.186654] mt_rbus 0000:00:00.0: runtime IRQ mapping not provided by arch
[ 17.201623] mt7981_init()-->
[ 17.204524] Use the default iPAiLNA bin image!
[ 17.208998] <--mt7981_init()
[ 17.212013] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX1
[ 17.219340] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX2
[ 17.226656] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX3
[ 17.233979] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX4
[ 17.241287] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX5
[ 17.248602] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX6
[ 17.255917] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX7
[ 17.263232] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX8
[ 17.270541] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX9
[ 17.327268] warp_module_init(): module init and register callback for warp
[ 17.334195] create warp_ctrl ok!!!
[ 17.337628] wed_get_slot_map(): assign slot_id:0 for entry: 0!
[ 17.343468] wed_get_slot_map(): assign slot_id:1 for entry: 1!
[ 17.354002] mtk_warp_proxy: module uses symbols from proprietary module mt_wifi, inheriting taint.
-------------------------------------------------------------------------------------
reloadprofile() begin
reloadprofile() end
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
reloadconfig() begin
................................load openvpn cert.........................
................................start of merge user and default........................
................................parse userconf to get mode.............................
................................end of parse userconf..................................
................................mode : router...............................
................................remodel defaulconfig: MR85X 1.0.0..........
................................end of merge user and default..........................
................................new configs merged.....................................
mode router,onemesh_update 1,wireless_onemesh_version 1
reloadconfig() end
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
agile config reload favicon and logo start!
agile config reload favicon and logo end!
agile config update replace product-info and soft-version start!
agile config update replace product-info and soft-version end!
[ 21.489870] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
saveconfig() begin
saveconfig() end
1 and 00 and 840
gmtoff: 1:00 and tz: -1:00
GMT-1:00DST-2:00,M3.2.0/2,M11.1.0/2
generating onemesh group id now...
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
wireless is starting...
saveconfig() begin
[ 24.149733] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 24.175841] br-lan: port 1(eth0.2) entered blocking state
[ 24.181268] br-lan: port 1(eth0.2) entered disabled state
[ 24.186895] device eth0.2 entered promiscuous mode
[ 24.191682] device eth0 entered promiscuous mode
saveconfig() end
[ 24.211939] br-lan: port 2(eth0.3) entered blocking state
[ 24.217416] br-lan: port 2(eth0.3) entered disabled state
[ 24.223017] device eth0.3 entered promiscuous mode
[ 24.230363] br-lan: port 3(eth0.4) entered blocking state
[ 24.235800] br-lan: port 3(eth0.4) entered disabled state
[ 24.241369] device eth0.4 entered promiscuous mode
[ 24.247915] mtk_soc_eth 15100000.ethernet eth1: configuring for fixed/2500base-x link mode
saveconfig() begin
saveconfig() end
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
wifi_init
config_profile_set, MacAddress=08:8A:F1:6D:7F:CE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, WscManufacturer=Mercusys>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, WscDeviceName=MR85X 1.0.0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, WscModelName=MR85X>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, WscModelNumber=1.0.0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, WscSerialNumber=1.0.0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, WSC_UUID_Str1=00000000-0000-1000-0000-088AF16D7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, WSC_UUID_E1=00000000000010000000088AF16D7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
do not do switch set in boot stage, when iptv on or snooping on
config_profile_set, MacAddress=08:8A:F1:6D:7F:CD>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
[ 26.626774] Lan Domain: tplinklogin.net
[ 26.630607] Lan Domain: www.tplinklogin.net
restart dnsmasq
config_profile_set, WscManufacturer=Mercusys>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, WscDeviceName=MR85X 1.0.0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, WscModelName=MR85X>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, WscModelNumber=1.0.0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, WscSerialNumber=1.0.0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, WSC_UUID_Str6=00000000-0000-1000-0000-088AF16D7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, WSC_UUID_E6=00000000000010000000088AF16D7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, CountryRegion=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, CountryNum=276>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, CountryCode=DE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AutoChannelSkipList=1;11;12;13>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, CountryNum=276>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, CountryCode=DE>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, CountryRegionABand=1>>/etc/wireless/mediatek[ 28.492687] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
/mt7981.dbdc.b1.dat
config_profile_set, EDCCAEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EDCCAEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RDRegion=CE>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SkuTableIdx=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SkuTableIdx=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
wifi_reload_local
========>>>>>>>>>>> insmod hyfi-bridging hyfi_linux_bridge=br-lan hyfi_bridge_mode=AP
[ 29.021618] QCA Hy-Fi netfilter installation: OK
wifi_shutdown_interface wifi0
ifconfig ra0 down
wifi_config_profile wifi0
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SSID1=MERCUSYS_7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra3 skipped
=====>>>>> wifi0: vif apcli0 skipped
config_profile_set, SSID3=QvtNGxlLupdotioxeBqNHYzEmUi4tk>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra4 skipped
config_profile_set, WirelessMode=16>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_BW=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BSSCoexistence=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, Channel=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AutoChannelSelect=3>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaDlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaUlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TWTSupport=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
Wanvids=0 0 0 0
Portseq=1 2 3
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
wifi_shutdown_interface wifi1
wifi_config_profile wifi1
[IPTV] WAN_PHY_IF=eth1
[IPTV] LAN_PHY_IF=eth0.2 eth0.3 eth0.4
[ 29.026308] DEBUG_LEVEL:1
[ 33.090901] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 1-eth0.2: 1 2
[ 33.099668] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 2-eth0.3: 2 3
[ 33.105793] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 3-eth0.4
[ 33.105793] ÀÿÿÿôV
[ 33.105793] Àÿÿÿ: 3 4
[ 33.116286] [RTL8367S INFO] Detect IPTV module started
[ 33.692962] [RTL8367S INFO] UTP_PORT0 link down speed 10
[ 33.699047] [RTL8367S INFO] UTP_PORT1 link down speed 10
[ 33.712969] [RTL8367S INFO] UTP_PORT2 link down speed 10
[ 33.722154] [RTL8367S INFO] UTP_PORT3 link down speed 10
[ 33.730807] [RTL8367S INFO] UTP_PORT4 link down speed 10
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
[ 34.140064] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 1-eth0.2: 1 2
[ 34.146203] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 2-eth0.3: 2 3
[ 34.152290] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 3-eth0.4
[ 34.152290] ÀÿÿÿôV
[ 34.152290] Àÿÿÿ: 3 4
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
[ 34.320389] br-lan: port 1(eth0.2) entered disabled state
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
[ 34.364398] br-lan: port 2(eth0.3) entered disabled state
[ 34.407459] br-lan: port 3(eth0.4) entered disabled state
[ 34.455116] device eth0 left promiscuous mode
[ 34.459631] br-lan: port 3(eth0.4) entered disabled state
[ 34.485151] br-lan: port 2(eth0.3) entered disabled state
[ 34.498903] br-lan: port 1(eth0.2) entered disabled state
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
[ 34.529141] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 34.537590] device eth0 entered promiscuous mode
saveconfig() begin
config_profile_set, SSID1=MERCUSYS_7FCE_5G>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE_5G>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax3 skipped
=====>>>>> wifi1: vif apclix0 skipped
config_profile_set, SSID3=9gWuE7wE7zJzMcyCn9jK61EorBeHe2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax4 skipped
saveconfig() end
config_profile_set, WirelessMode=17>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_BW=2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, Channel=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSelect=3>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSkipList=100;104;108;112;116;120;124;128;132;136;140>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, IEEE80211H=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWait=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsDedicatedZeroWait=3>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWaitDefault=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaDlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaUlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TWTSupport=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
*******switch_set_snooping
>>>>>> clear_switch_vlan
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
Node 0, zone DMA32 33 72 21 20 8 1 1 1 4 1 77
wifi_start_interface wifi0
wifi_vap_local ra0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig ra0 up
[ 36.953679] client_get_axi_slot_id(): wrong BUS_TYPE
[ 36.958646] warp_cap_support(): chip_id=7981 is in WHNAT support list
[ 36.965113] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entry: 000000001ad8d815
[ 36.973811] client_hif_specific_get(): hw->base_phy_addr 0x18000000!!
[ 36.980238] client_chip_specific_get(): 0x7981 chip id 0x7981!!
[ 36.986273] warp_entry_get_by_pdev(): return entry[0]
[ 36.994383] warp_msg_register():warp,pid,8503,id,0,wed_idx,0
[ 37.000043] warp_dev0 15010000.wed: Using 32bit DMA for streaming map
[ 37.006520] warp_dev0 15010000.wed: Using 32bit DMA for coherent map
[ 37.012935] wed_init(0): res_start = 0x15010000, size = 1000, irq=7,base_addr=0xffffffc012745000
[ 37.022176] wed_ring_init(): wed tx ring init result = 0
[ 37.028107] wed_ring_init(): wed rx ring init result = 0
[ 37.045213] create wed ok!!!
[ 37.048135] wdma_init(): wdma(0) base_addr=0xffffffc01274d800, base_phy_addr=0x15104800
[ 37.057083] warp_woif_bus_init_hw(): bus:000000003fa799db, txring: 20, pa: 0x0000000053114000, 0x0000000053114000, 24, 28, 3c
[ 37.068433] warp_woif_bus_init_hw(): bus:000000003fa799db, rxring: 50, pa: 0x0000000053116000, 0x0000000053116000, 54, 58, 6c
[ 37.079837] get_region_info(): wed_idx = 0, base_addr = 0x00000000563d796c, size = 0x40000, res.start = 0x47d80000, shared:0
[ 37.091107] get_region_info(): wed_idx = 0, base_addr = 0x00000000a1d16ca7, size = 0x8000, res.start = 0x151e0000, shared:0
[ 37.102299] get_region_info(): wed_idx = 0, base_addr = 0x00000000b30f5e7c, size = 0x240000, res.start = 0x47dc0000, shared:1
[ 37.113633] get_region_info(): wed_idx = 0, base_addr = 0x00000000d395b1ce, size = 0x1000, res.start = 0x15194000, shared:0
[ 37.124766] warp_fwdl_mcu_mode(): mcu mode, need fwdl
[ 37.132823] ########## WO Firmware ##########
[ 37.137181] Chip ID: 0x0000
[ 37.139966] ECO version:0
[ 37.142615] Version: DEV_000000
[ 37.145747] Build date: 20220901175230
[ 37.149481] Total region:3
[ 37.152174] #################################
[ 37.156544] Parsing tailer region 0
[ 37.160022] Target address: 0x151e0000
[ 37.163858] Download size: 20768
[ 37.167191] Parsing tailer region 1
[ 37.170665] Target address: 0x47d80000
[ 37.174501] Download size: 86224
[ 37.177878] Parsing tailer region 2
[ 37.181355] Target address: 0x47dc0000
[ 37.185202] Download size: 2319824
[ 37.190890] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu
[ 37.212681] warp_fwdl_ready_check_mcu_mode(): wocpu is ready
[ 37.218352] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE
[ 37.224280] wo_proc_init done 00000000187c8660
[ 37.228798] wo_exep_proc_init done 00000000187c8660
[ 37.233802] wo_exception_init(0): exp log= 0x0000000002c60bbe, phy_addr= 0x0000000052c08000 size= 32768
*******set_switch_vlan vid=2 mem=0 tag=off cpu=6
####port 0 set pvid 2
####untagged_ports: 0
####tagged_ports:
####vlan 2 set ports " 0 6t"
*******set_switch_vlan vid=3 mem=1 tag=off cpu=6
####port 1 set pvid 3
####untagged_ports: 1
####tagged_ports:
####vlan 3 set ports " 1 6t"
*******set_switch_vlan vid=4 mem=2 tag=off cpu=6
[ 37.362574] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS0 PhyMode=78
[ 37.369192] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS1 PhyMode=78
[ 37.375836] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS2 PhyMode=78
[ 37.382438] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS3 PhyMode=78
####port 2 set p[ 37.389047] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS4 PhyMode=78
vid 4[ 37.397037] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS5 PhyMode=177
[ 37.404155] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS6 PhyMode=177
[ 37.411008] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS7 PhyMode=177
[ 37.417722] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS8 PhyMode=177
[ 37.424428] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS9 PhyMode=177
####untagged_ports: 2
####tagged_ports:
####vlan 4 set ports " 2 6t"
****switch_vlan_apply***
****switch_vlan_apply Done***
[ 37.513440] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=0, Desired MFPC=0
[ 37.520828] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=1, Desired MFPC=0
[ 37.528226] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=2, Desired MFPC=0
[ 37.535625] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=3, Desired MFPC=0
[ 37.543024] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=4, Desired MFPC=0
[ 37.550406] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=5, Desired MFPC=0
[ 37.557800] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=6, Desired MFPC=0
[ 37.565189] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=7, Desired MFPC=0
[ 37.572577] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=8, Desired MFPC=0
[ 37.579959] WiFi@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=9, Desired MFPC=0
[ 37.590333] WiFi@C12L1,RTMPSetProfileParameters() 8685: ra0, QoSMgmtCapa=0
[ 37.597208] WiFi@C12L1,RTMPSetProfileParameters() 8685: (null), QoSMgmtCapa=0
[ 37.604339] WiFi@C12L1,RTMPSetProfileParameters() 8685: (null), QoSMgmtCapa=0
[ 37.611461] WiFi@C12L1,RTMPSetProfileParameters() 8685: (null), QoSMgmtCapa=0
[ 37.618592] WiFi@C12L1,RTMPSetProfileParameters() 8685: (null), QoSMgmtCapa=0
[ 37.625724] WiFi@C12L1,RTMPSetProfileParameters() 8685: (null), QoSMgmtCapa=0
[ 37.632864] WiFi@C12L1,RTMPSetProfileParameters() 8685: (null), QoSMgmtCapa=0
[ 37.639989] WiFi@C12L1,RTMPSetProfileParameters() 8685: (null), QoSMgmtCapa=0
[ 37.647124] WiFi@C12L1,RTMPSetProfileParameters() 8685: (null), QoSMgmtCapa=0
[ 37.654255] WiFi@C12L1,RTMPSetProfileParameters() 8685: (null), QoSMgmtCapa=0
[ 37.671192] WiFi@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[0] ApCliMuMimoDlEnable = 0
[ 37.679711] WiFi@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[1] ApCliMuMimoDlEnable = 0
[ 37.688483] WiFi@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[0] ApCliMuMimoUlEnable = 0
[ 37.697005] WiFi@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[1] ApCliMuMimoUlEnable = 0
[ 37.705912] WiFi@C14L1,MulticastDLTableReset() 2571: multicast deny list table is not ready
[ 37.820623] BandIdx = 0, tpcDutyInitFlag=1
[ 37.824720] BandIdx = 1, tpcDutyInitFlag=1
[ 37.829062] BandIdx = 0, tpcnitFlag=1
[ 37.832733] BandIdx = 1, tpcnitFlag=1
[ 37.836658] BandIdx = 0, tpcDuty=100-75-50-25
[ 37.841002] BandIdx = 1, tpcDuty=100-75-50-25
[ 37.845631] BandIdx = 0, thermalHighEn=1
[ 37.849540] BandIdx = 1, thermalHighEn=1
[ 37.853724] BandIdx = 0, thermalHighCritera=125
[ 37.858240] BandIdx = 1, thermalHighCritera=125
[ 37.863031] BandIdx = 0, thermalLowEn=1
[ 37.866853] BandIdx = 1, thermalLowEn=1
[ 37.870937] BandIdx = 0, thermalLowCritera=118
[ 37.875381] BandIdx = 1, thermalLowCritera=118
[ 37.880079] BandIdx = 0, thermalRecheckTime=5
[ 37.884443] BandIdx = 1, thermalRecheckTime=5
[ 37.889058] BandIdx = 0, thermalRFOffEn=0
[ 37.893068] BandIdx = 1, thermalRFOffEn=0
[ 37.897333] BandIdx = 0, thermalRFOffCriteria=125
[ 37.902022] BandIdx = 1, thermalRFOffCriteria=125
[ 37.906991] BandIdx = 0, thermalUcType=1
[ 37.910899] BandIdx = 1, thermalUcType=1
[ 37.918012] wdma_dma_ctrl(): WDMA_GLO_CFG=50404e70, txrx = 0
[ 37.929813] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e70, txrx = 0
[ 37.945026] warp_tx_ring_init_hw(): configure ring 0 setting
[ 37.950683] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24420=56298000,24424=2048,24428=0
[ 37.960957] warp_tx_ring_init_hw(): configure ring 1 setting
[ 37.966621] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24430=55210000,24434=2048,24438=0
[ 37.976997] set_rrocfg,0
[ 38.002429] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e74, txrx = 3
[ 38.008090] using E1 ROM patch
[ 38.011131] using E1 RAM
[ 38.013671] current sync CR = 0x1
[ 38.017137] Built date: 20230602235633a
[ 38.021062] Platform: ALPS
[ 38.023915] HW/SW version: 0x8a108a10
[ 38.027657] Patch version: 0xffffffff
[ 38.035758] current sync CR = 0x1
[ 38.043428] Chip ID: 0x14
[ 38.046136] Eco version: 0x00
[ 38.049179] Region number: 0x0b
[ 38.052394] Format version: 0x02
[ 38.055717] Format flag: 0x01
[ 38.058763] Ram version: ____000000
[ 38.062329] Built date: 20230602235650
[ 38.066171] Common crc: 0x9212bfc6
[ 38.069652] Release info: header tag = 0, total length = 0
[ 38.096549] Chip ID: 0x00
[ 38.099257] Eco version: 0x00
[ 38.102299] Region number: 0x03
[ 38.105567] Format version: 0x02
[ 38.108870] Format flag: 0x01
[ 38.111912] Ram version: DEV_000000
[ 38.115492] Built date: 20220901175135
[ 38.119327] Common crc: 0xdc1c7789
[ 38.122815] Release info: header tag = 0, total length = 0
[ 38.207956] current sync CR = 0x7
[ 38.211758] efuse_probe: efuse = deaddead
[ 38.215801] rtmp_ee_load_from_bin::bin FileName = /tp_data/MT7981_EEPROM.bin, bin bak = /user_data1/MT7981_EEPROM.bin, use caled e2p file
[ 38.229348] Load EEPROM Buffer from /tp_data/MT7981_EEPROM.bin
[ 38.235205] rtmp_btn_load_from_bin::bin FileName = /tp_data/MT7981_BTNFLAG.bin, bin bak = /user_data1/MT7981_BTNFLAG.bin
[ 38.248603] WiFi@C02L1,is_cal_free_ic() 831: [a-die version:1]
[ 40.525917] WiFi@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now!
[ 40.533483] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000c321594a,Band=0,rfcap=1,channel=1,PhyMode=64 extCha=0xf
[ 40.544201] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000e9a89dc4,Band=1,rfcap=2,channel=36,PhyMode=128 extCha=0xf
[ 40.555142] WiFi@C01L1,AntCfgInit() 3179: Not support for HIF_MT yet!
[ 40.576254] ch_switch_monitor_state_machine_init:: enter
[ 40.581601] ch_switch_monitor_cfg_reset:: enter
[ 40.586171] ch_switch_monitor_cfg_reset:: enter
[ 40.592264] WiFi@C17L1,tx_pwr_comp_init() 641: NotSupportYet!
[ 40.598117] WiFi@C12L1,SCS_init() 880: INIT SCSEnable [0]= 1
[ 40.603865] WiFi@C12L1,SCS_init() 887: INIT SCSEnable [1]= 0
[ 40.609692] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 40.615623] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 40.621116] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited!
[ 40.648040] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 3
[ 40.654052] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 40.659632] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 40.665164] WiFi@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 40.675093] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(0) cck_timeout Fail!
[ 40.683791] WiFi@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 40.693706] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(0) ofdm_timeout Fail!
[ 40.702476] WiFi@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 40.712387] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(0) ofdma_timeout Fail!
init_all_vif_nam[ 40.721259] WiFi@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
e
[ 40.732575] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(1) cck_timeout Fail!
[ 40.732580] WiFi@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 40.732584] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(1) ofdm_timeout Fail!
[ 40.732589] WiFi@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
DEVICES=wifi0 wi[ 40.732593] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(1) ofdma_timeout Fail!
fi1[ 40.732691] mt_wifi_init: Band = 0, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 40.788974] mt_wifi_init: Band = 0, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
dev=wifi0
[ 40.802812] mt_wifi_init: Band = 1, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 40.802830] mt_wifi_init: Band = 1, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 40.812743] :(op = 1)
dev=wifi1
wifi_macfilter
[ 40.832783] WiFi@C00L1,FastPathCheckMIC() 1010: (ret = 0)(op:1)
[ 40.839246] WiFi@C00L1,MtCmdCr4RedSet() 914: MtCmdCr4RedSet: (ret = 0)
iwpriv ra0 set A[ 40.845798] WiFi@C00L1,SendRedCmd() 1049: SendRedCmd:(ret = 1)
ccessPolicy=0
[ 40.853531] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.860638] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.867138] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.873503] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.879936] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.886295] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.892735] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.899075] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.905518] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.911862] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.918308] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.924659] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.931093] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.937451] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.943891] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.950232] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.956667] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.963013] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.969441] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.975788] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.982223] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 40.988582] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 40.995022] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 41.001363] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 41.007798] WiFi@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 41.014151] WiFi@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 41.020581] WiFi@C23L1,DfsBuildChannelList() 3890: [RDM]: wdev is not 5G.
[ 41.027388] phy_freq_adjust : no prim_ch value for adjust!
[ 41.032981] WiFi@C23L1,operate_loader_phy() 398: phy_freq_adjust failed!WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 41.047483] WiFi@C23L1,HcGetBandByChannel() 1235: No hdev parking on channel:0, just return a default band_idx 0!
[ 41.058342] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 41.065603] WiFi@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 41.072146] WiFi@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[0] = 1
[ 41.079319] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 41.084877] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 41.090271] WiFi@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 78, ACSChStat:0
[ 41.097570] WiFi@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x10c/0x4b8 [mt_wifi])!!
[ 41.109931] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 41.502902] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 41.882934] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 42.272892] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
*******set_multicast_router
set_multicast_router done
[ 42.652898] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 43.032922] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 43.042975] WiFi@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APUpdateOperationMode+0x114/0x278 [mt_wifi])!!
[ 43.412873] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 43.792917] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 44.172926] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 44.553025] WiFi@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x258/0x4b8 [mt_wifi])!!
[ 44.565335] WiFi@C23L0,SelectClearChannelBusyTime() 1890: [SelectClearChannelBusyTime] - band0 START
[ 44.574470] WiFi@C23L0,SelectClearChannelBusyTime() 1891: [SelectClearChannelBusyTime] - cfg_ht_bw = 1 vht_bw = 0
[ 44.584732] WiFi@C23L0,SelectClearChannelBusyTime() 1898: ====================================================================
[ 44.596202] WiFi@C23L0,SelectClearChannelBusyTime() 1904: Channel 2 : Busy Time = 5400, Skip Channel = FALSE, BwCap = TRUE
[ 44.607589] WiFi@C23L0,SelectClearChannelBusyTime() 1904: Channel 3 : Busy Time = 1248, Skip Channel = FALSE, BwCap = TRUE
[ 44.618974] WiFi@C23L0,SelectClearChannelBusyTime() 1904: Channel 4 : Busy Time = 3003, Skip Channel = FALSE, BwCap = TRUE
[ 44.630357] WiFi@C23L0,SelectClearChannelBusyTime() 1904: Channel 5 : Busy Time = 4546, Skip Channel = FALSE, BwCap = TRUE
[ 44.641826] WiFi@C23L0,SelectClearChannelBusyTime() 1904: Channel 6 : Busy Time = 7737, Skip Channel = FALSE, BwCap = TRUE
[ 44.653223] WiFi@C23L0,SelectClearChannelBusyTime() 1904: Channel 7 : Busy Time = 6032, Skip Channel = FALSE, BwCap = TRUE
[ 44.664604] WiFi@C23L0,SelectClearChannelBusyTime() 1904: Channel 8 : Busy Time = 1628, Skip Channel = FALSE, BwCap = TRUE
[ 44.675984] WiFi@C23L0,SelectClearChannelBusyTime() 1904: Channel 9 : Busy Time = 2042, Skip Channel = FALSE, BwCap = TRUE
[ 44.687373] WiFi@C23L0,SelectClearChannelBusyTime() 1904: Channel 10 : Busy Time = 10370, Skip Channel = FALSE, BwCap = TRUE
[ 44.698760] WiFi@C23L0,SelectClearChannelBusyTime() 1907: ====================================================================
[ 44.710149] WiFi@C23L0,SelectClearChannelBusyTime() 2179: Rule 3 Channel Busy time value : Select Primary Channel 3
[ 44.720578] WiFi@C23L0,SelectClearChannelBusyTime() 2181: Rule 3 Channel Busy time value : Min Channel Busy = 1248
[ 44.730932] WiFi@C23L0,SelectClearChannelBusyTime() 2186: Rule 3 Channel Busy time value : BW = 20
[ 44.739899] WiFi@C23L0,SelectClearChannelBusyTime() 2225: [SelectClearChannelBusyTime] - band0 END
[ 44.748858] WiFi@C00L0,ApAutoChannelAtBootUp() 407: Auto channel selection: Selected channel = 3, IsAband = 0
[ 44.758903] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 44.900942] WiFi@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 44.911962] WiFi@C23L1,DfsBuildChannelList() 3890: [RDM]: wdev is not 5G.
[ 44.918766] WiFi@C00L0,ApAutoChannelAtBootUp() 599: <-----------------
[ 44.925580] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 44.931046] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 45.097831] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 45.422687] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 45.428145] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 45.594465] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 45.912699] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 45.918156] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 46.085358] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 46.372857] WiFi@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!!
[ 46.402720] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 46.408180] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 46.575624] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 46.902731] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 46.908191] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 47.074958] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 47.392704] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 47.398205] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 47.565789] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 47.882756] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 47.888217] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 48.056058] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 48.382779] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 48.388229] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 48.556043] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 48.872723] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 48.878170] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 49.046043] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 49.362703] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 49.368165] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 49.536584] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 49.852713] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 49.858160] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 50.026647] WiFi@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 50.342688] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 50.485398] WiFi@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 50.496483] WiFi@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 50.638205] WiFi@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 50.726131] WiFi@C00L1,TxCCKStreamCtrl() 21830: set wrong parameters
[ 50.743705] PrintSrCmd:
[ 50.743705] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 50.743705] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 50.757713] PrintSrCmd:
[ 50.757713] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 50.757713] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 50.771699] PrintSrCmd:
[ 50.771699] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 50.771699] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 50.785769] PrintSrCmd:
[ 50.785769] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 50.785769] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 50.799882] PrintSrCmd:
[ 50.799882] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 50.799882] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 50.813995] PrintSrCmd:
[ 50.813995] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 50.813995] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 50.828142] WiFi@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 50.839177] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
[ 50.845469] [mtf_txpower_all_rate_info] band_idx:0 pwr:32 ChBand:2G ePAGain:0
=====>>>>>set tp_ie for vap ra0
iwpriv ra0 set [ 50.857632] device eth0 left promiscuous mode
tp_ie=dd1e001d0f[ 50.862951] br-lan: port 3(eth0.4) entered disabled state
1001600000088AF1[ 50.869829] br-lan: port 2(eth0.3) entered disabled state
6D7FCE088AF16D7F[ 50.876670] br-lan: port 1(eth0.2) entered disabled state
CE45d600007FCE00010000
iwpriv ra0 set mapEnable=3
iwpriv apcli0 set AccessPolicy=0
[ 50.891178] Set_Map_Proc current MAP MODE is 3
[ 50.895805] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
iwpriv ra0 set mapR2Enable=1
iwpriv rax0 set [ 50.907540] Set_MapR2_Proc: MAP R2 is enabled
AccessPolicy=0
[ 50.916424] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
[ 50.931458] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 50.939908] device eth0 entered promiscuous mode
iwpriv apclix0 s[ 50.945069] br-lan: port 1(eth0.2) entered disabled state
et AccessPolicy=0
[ 50.953091] device eth0.2 left promiscuous mode
[ 50.957899] br-lan: port 1(eth0.2) entered disabled state
[ 51.004950] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
iwpriv ra0 set SSID=MERCUSYS_7FCE
iwpriv ra2 set AccessPolicy=0
[ 51.019674] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 51.108728] Set_HighPriMcs(): input param error
[ 51.108728] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 51.108728] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 51.108728] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 51.108728] MCS must in range from 0 to 7 for OFDM Mode
[ 51.137135] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
iwpriv ra0 set H[ 51.147359] br-lan: port 1(eth0.2) entered blocking state
ideSSID=0
[ 51.153483] br-lan: port 1(eth0.2) entered disabled state
[ 51.153670] device eth0.2 entered promiscuous mode
mumimo_config ra0 1
iwpriv ra0 set MuMimo=1
iwpriv ra0 set BeaconPeriod=100
iwpriv rax2 set[ 51.173712] br-lan: port 2(eth0.3) entered disabled state
AccessPolicy=0
[ 51.179639] sync for : ra0
[ 51.186637] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
iwpriv ra0 set R[ 51.196439] device eth0.3 left promiscuous mode
TSThreshold=2346[ 51.201331] br-lan: port 2(eth0.3) entered disabled state
[ 51.233875] Set_RTSThreshold_Proc: set wdev0 rts length threshold=2346(0x92a)
iwpriv ra0 set FragThreshold=2346
[ 51.246830] Set_FragThreshold_Proc::set wdev0 FragThreshold=2346)
iwpriv ra0 set DtimPeriod=1
iwpriv ra0 set WmmCapable=1
[ 51.269005] br-lan: port 2(eth0.3) entered blocking state
[ 51.274428] br-lan: port 2(eth0.3) entered disabled state
[ 51.280003] device eth0.3 entered promiscuous mode
iwpriv ra0 set NoForwarding=0
[ 51.289121] br-lan: port 3(eth0.4) entered disabled state
[ 51.296497] device eth0.4 left promiscuous mode
[ 51.301044] br-lan: port 3(eth0.4) entered disabled state
iwpriv ra0 set NoForwardingBTNBSSID=0
iwpriv ra0 set UAPSDCapable=1
[ 51.364472] br-lan: port 3(eth0.4) entered blocking state
[ 51.369873] br-lan: port 3(eth0.4) entered disabled state
[ 51.377636] device eth0.4 entered promiscuous mode
[ 51.388429] mtk_soc_eth 15100000.ethernet eth1: configuring for fixed/2500base-x link mode
killall -q -SIGINT rt2860apd
iwpriv ra0 set AuthMode=WPA2PSK
iwpriv ra0 set EncrypType=AES
iwpriv ra0 set IEEE8021X=0
iwpriv ra0 set RekeyInterval=0
iwpriv ra0 set WPAPSK=93350273
iwpriv ra0 set WscConfMode=7
iwpriv ra0 set WscConfStatus=2
iwpriv ra0 set WscVendorPinCode=93350273
iwpriv ra0 set WscLabelDisabled=[ 52.055209] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
0
iwpriv ra0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv ra0 set AccessPolicy=0
iwpriv ra0 set HideSSID=0
iwpriv ra0 set SSID=MERCUSYS_7FCE
[ 52.093925] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 52.196629] Set_HighPriMcs(): input param error
[ 52.196629] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 52.196629] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 52.196629] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 52.196629] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set hw_nat_register=1
[ 52.236556] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
brctl addif br-lan ra0
[ 52.283028] br-lan: port 4(ra0) entered blocking state
[ 52.288167] br-lan: port 4(ra0) entered disabled state
[ 52.299718] device ra0 entered promiscuous mode
[ 52.304412] br-lan: port 4(ra0) entered blocking state
[ 52.309548] br-lan: port 4(ra0) entered forwarding state
[ 52.315206] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge [ 52.588956] br-lan: port 5(apcli0) entered blocking state
br-lan: Invalid [ 52.594746] br-lan: port 5(apcli0) entered disabled state
argument
brctl addif br-lan apcli0
[ 52.608458] device apcli0 entered promiscuous mode
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
can't add ra2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra2 3 1
can't set ra2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
can't add rax0 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax0 3 1
can't set rax0 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
[ 52.728072] br-lan: port 6(apclix0) entered blocking state
[ 52.733623] br-lan: port 6(apclix0) entered disabled state
[ 52.755103] device apclix0 entered promiscuous mode
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
can't add rax2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax2 3 1
can't set rax2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra1
false 0
========>>>>>>>>>>> do not start apsd for mode router on boot
[ 54.150277] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
[ 54.189667] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
[ 54.255210] device apcli0 left promiscuous mode
[ 54.259840] br-lan: port 5(apcli0) entered disabled state
[ 54.313502] device apclix0 left promiscuous mode
[ 54.318235] br-lan: port 6(apclix0) entered disabled state
[ 54.629685] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
[ 54.657513] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra1
===>>>rftestflag=1!!
ifconfig ra1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
[ 55.107138] br-lan: port 5(apcli0) entered blocking state
[ 55.112532] br-lan: port 5(apcli0) entered disabled state
[ 55.161574] device apcli0 entered promiscuous mode
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
can't add ra2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra2 3 1
can't set ra2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
can't add rax0 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax0 3 1
can't set rax0 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
[ 55.297272] br-lan: port 6(apclix0) entered blocking state
[ 55.302778] br-lan: port 6(apclix0) entered disabled state
[ 55.355562] device apclix0 entered promiscuous mode
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
can't add rax2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax2 3 1
can't set rax2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra3
do not do switch set in boot stage, when iptv on or snooping on
[ 55.896805] Lan Domain: tplinklogin.net
[ 55.900637] Lan Domain: www.tplinklogin.net
restart dnsmasq
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra3
ifconfig ra3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
can't add ra2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra2 3 1
can't set ra2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
can't add rax0 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax0 3 1
can't set rax0 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
can't add rax2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax2 3 1
can't set rax2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apcli0
add :!SSLv2 to uhttpd progress
add :!SSLv3 to uhttpd progress
add :!TLSv1 to uhttpd progress
add :!RC4 to uhttpd progress
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig apcli0 up
[ 57.544020] mtk_ppe_dev_register_hook : ineterface apcli0 register (2)
[ 57.550772] br-lan: port 5(apcli0) entered blocking state
[ 57.556210] br-lan: port 5(apcli0) entered forwarding state
[ 57.562897] br-lan: port 5(apcli0) entered disabled state
iwpriv apcli0 set mapEnable=3
[ 57.570497] Set_Map_Proc current MAP MODE is 3
iwpriv apcli0 set mapR2Enable=1
[ 57.577986] Set_MapR2_Proc MAP R2 is already enabled
iwpriv apcli0 set ApCliEnable=0
[ 57.589114] SetApCliEnableByWdev: I/F(apcli0) (enable = 0)
iwpriv apcli0 set ApCliAuthMode=WPAPSKWPA2PSK
iwpriv apcli0 set ApCliEncrypType=TKIPAES
iwpriv apcli0 set ApCl[ 57.605366]
[ 57.605366] I/F(apcli0) Set_ApCli_Mesh_Rule_Enable_Proc::(enable=1)
iWPAPSK=56b826c6d2a33d2ac47b1636c4faA7
iwpriv apcli0 set ApCliM[ 57.618302] SetApCliEnableByWdev: I/F(apcli0) (enable = 1)
eshRule=1
iwpriv apcli0 set ApCliSsid=e2b6520c958f5e14820332d7ee1a39
iwpriv apcli0 set ApCliEnable=1
brctl addif br-lan apcli0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
[aviraSentinelFull]: stop
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
can't add ra2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra2 3 1
can't set ra2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
can't add rax0 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax0 3 1
can't set rax0 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
[aviraSentinelLite]: stop
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
can't add rax2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax2 3 1
can't set rax2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra2
SFE STARTED---
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig ra2 up
[ 58.517067] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[2]=9, bw_grp=16 omac=17
[ 58.527748] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 58.534948] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 58.541470] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[0] = 1
[ 58.548663] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 58.554208] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 58.559596] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 78, ACSChStat:1
[ 58.566656] 7981@C00L1,ApAutoChannelAtBootUp() 513: not A band
[ 58.572477] 7981@C08L1,ap_run_at_boot() 639:  ACS is disable !!
[ 58.579478] 7981@C12L1,SetWPAPSKKey() 1643: WPAPSK Key length(0) error, required 8 ~ 64 characters!(keyStr=)
[ 58.599634] 7981@C00L1,TxCCKStreamCtrl() 21830: set wrong parameters
[ 58.617151] PrintSrCmd:
[ 58.617151] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 58.617151] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 58.631177] PrintSrCmd:
[ 58.631177] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 58.631177] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 58.645212] PrintSrCmd:
[ 58.645212] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 58.645212] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 58.659230] PrintSrCmd:
[ 58.659230] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 58.659230] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 58.673308] PrintSrCmd:
[ 58.673308] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 58.673308] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 58.687425] PrintSrCmd:
[ 58.687425] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 58.687425] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 58.701584] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 58.712616] mtk_ppe_dev_register_hook : ineterface ra2 register (3)
[ 58.718893] [mtf_txpower_all_rate_info] band_idx:0 pwr:32 ChBand:2G ePAGain:0
=====>>>>>set tp_ie for vap ra2
iwpriv ra2 set tp_ie=dd1e001d0f1001640000088AF16D7FCE088AF16D7FCE45d600007FCE00[ 58.736524] Set_Map_Proc current MAP MODE is 3
010000
iwpriv ra2 set mapEnable=3
iwpriv ra2 s[ 58.744823] Set_MapR2_Proc MAP R2 is already enabled
et mapR2Enable=1
[ 58.810711] [RTL8367S INFO] proc write flow_control
[ 58.818909] [RTL8367S INFO] set port= 0 flow_control= 0
[ 58.825263] [RTL8367S INFO] proc write flow_control
[ 58.836265] [RTL8367S INFO] set port= 1 flow_control= 0
[ 58.842106] [RTL8367S INFO] proc write flow_control
[ 58.850375] [RTL8367S INFO] set port= 2 flow_control= 0
iwpriv ra2 set SSID=QvtNGxlLupdotioxeBqNHYzEmUi4tk
[ 58.886791] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[2]=9, bw_grp=16 omac=17
[ 58.902863] 7981@C12L1,SetWPAPSKKey() 1643: WPAPSK Key length(0) error, required 8 ~ 64 characters!(keyStr=)
[ 58.925299]
[ 58.925299] Autonego mode
[ 58.925843] Set_HighPriMcs(): input param error
[ 58.925843] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 58.925843] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 58.925843] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 58.925843] MCS must in range from 0 to 7 for OFDM Mode
[ 58.958982] 7981@C12L1,rt28xx_ap_ioctl() 853: interface is down, cmd [8be1] return!!!
iwpriv ra2 set HideSSID=1
mumimo_config ra[ 58.970822] 7981@C12L1,rt28xx_ap_ioctl() 903: interface is down, cmd [8bf1] return!!!
2 1
iwpriv ra2 set MuMimo=1
iwpriv ra2 set BeaconPeriod=100
[ 58.985219] sync for : ra0
[ 58.988866] sync for : ra2
iwpriv ra2 set RTSThreshold=2346
[ 59.000522] Set_RTSThreshold_Proc: set wdev2 rts length threshold=2346(0x92a)
iwpriv ra2 set FragThreshold=234[ 59.010308] Set_FragThreshold_Proc::set wdev2 FragThreshold=2346)
6
vpn client if off, exit
iwpriv ra2 set DtimPeriod=1
iwpriv ra2 set WmmCapable=1
iwpriv ra2 set NoForwarding=0
iwpriv ra2 set NoForwardingBTNBSSID=0
iwpriv ra2 set UAPSDCapable=1
table: 0x1eec3700
iwpriv ra2 set AuthMode=WPA2PSK
iwpriv ra2 set EncrypType=AES
iwpriv ra2 set IEEE8021X=0
iwpriv ra2 set RekeyInterval=0
iwpriv ra2 set WPAPSK=8VwEYmXBF2PYWzwNce1lJfXdTmzEXw
iwpriv ra2 set WscConfMode=0
iwpriv ra2 set W[ 59.221247] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
scConfStatus=2
iwpriv ra2 set WscLabelDisabled=0
wpsd[wps_create_ibus_thread:43]: create ibus thread successfully
wpsd[wpsd_backup_run_mode:1518]: DUT RUNNING AS A SUPER REPEATER!!!
iwpriv ra2 set WscSetupLock=0
wpsd[wpsd_check_available_status:1319]: enabled: 1, apWpsAvailable: 3, staWpsAvailable: 3, pinEnabled: 1, pinCode:
=====>>>>> acPolicy: off action: black!!!!
iwpriv ra2 set Access[ 59.265694] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
Policy=0
iwpriv ra2 set HideSSID=1
iwpriv ra2 set SSID=QvtNGxl[ 59.277884] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[2]=9, bw_grp=16 omac=17
LupdotioxeBqNHYzEmUi4tk
[ 59.371337] Set_HighPriMcs(): input param error
[ 59.371337] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 59.371337] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 59.371337] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 59.371337] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra2 set hw_nat_register=1[ 59.402457] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
[ 59.411368] mtk_ppe_dev_register_hook : ra2 has been registered in wifi_hook_if table[3]
[ 59.419593] mtk_ppe_dev_register_hook : apcli0 has been registered in wifi_hook_if table[2]
brctl addif br-lan ra2
[ 59.430896] br-lan: port 7(ra2) entered blocking state
[ 59.436235] br-lan: port 7(ra2) entered disabled state
[ 59.444417] device ra2 entered promiscuous mode
[ 59.449085] br-lan: port 7(ra2) entered blocking state
[ 59.454241] br-lan: port 7(ra2) entered forwarding state
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
[ 59.583019] sta_cntl_connect_by_cfg:: can't find SSID[e2b6520c958f5e14820332d7ee1a39] in ScanTab.
[ 59.591991] SetApCliEnableByWdev: I/F(apcli0) (enable = 0)
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
can't add rax0 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax0 3 1
can't set rax0 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
[del_tc_root] true true true true
[del_tc_root] input:
brctl addif br-lan rax2
can't add rax2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax2 3 1
can't set rax2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra4
QDMA fc reg's bit 16 should be 0 in pppq mode.
hqos disable[ 59.780697] qdma_txq1: mark = 0x0
[ 59.784706] qdma_txq3: mark = 0x0
[ 59.788239] qdma_txq2: mark = 0x0
[ 59.792425] qdma_txq4: mark = 0x0
[ 59.796457] Per-port-per-queue mode is going to be enabled !
[ 59.802114] PPPQ use qid 0~5 (scheduler 0).
[ 59.806339] [RTL8367S INFO] utp_port -1 out of range: is_vid 0 vid_qid 0
[ 59.813051] [hnat_qos_shaper_ebl: 2436] qid = 0, speed = 0
[ 59.818523] rtk_port_phyStatus_get failed...
[ 59.823163] [hnat_qos_shaper_ebl: 2436] qid = 1, speed = 10
[ 59.829161] [hnat_qos_shaper_ebl: 2436] qid = 2, speed = 10
[ 59.838196] [hnat_qos_shaper_ebl: 2436] qid = 3, speed = 10
[ 59.843826] [RTL8367S INFO] utp_port 3 out of range: is_vid 0 vid_qid 4
[ 59.850432] [hnat_qos_shaper_ebl: 2436] qid = 4, speed = 0
[ 59.855935] rtk_port_phyStatus_get failed...
[ 59.860198] get_speed_by_vid_qid = 0000000058e925fc
[ 59.913053] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 59.914206] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 59.947958] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 60.259070] 7981@C12L1,rt28xx_ap_ioctl() 853: interface is down, cmd [8be1] return!!!
[ 60.282795] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra4
ifconfig ra4 down
brctl show br-lan
[ 60.653138] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
[ 60.795532] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
can't add rax0 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax0 3 1
can't set rax0 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
cwmp: stop cwmp
can't add rax2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax2 3 1
can't set rax2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_start_interface wifi1
wifi_vap_local rax0
sys_mode=router, data_model=tr181
[ 61.122797] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
dhcp_hook_d not load
[ 61.157586] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 61.297324] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 61.512978] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig rax0 up
[ 61.679298] phy_freq_adjust : no prim_ch value for adjust!
[ 61.684859] 7981@C23L1,operate_loader_phy() 398: phy_freq_adjust failed!WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
[ 61.702768] 7981@C23L1,HcGetBandByChannel() 1235: No hdev parking on channel:0, just return a default band_idx 0!
[ 61.713791] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 61.720960] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 61.727488] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[1] = 1
[ 61.735063] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 61.740588] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 61.746019] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 177, ACSChStat:0
[ 61.753372] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x10c/0x4b8 [mt_wifi])!!
[ 61.765741] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 62.263702] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 62.406408] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 62.482953] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 62.662678] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 62.801715] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 62.882906] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!!
[ 62.934300] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 62.941429] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 62.948760] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 63.022899] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 63.310152] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 63.522900] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 63.812596] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 63.954893] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 64.022912] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 64.212672] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 64.247529] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 64.255014] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 64.388113] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 64.592949] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 64.760885] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 64.962953] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 65.105240] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 65.116576] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 65.422706] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 65.457627] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 65.598206] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 65.605410] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x258/0x4b8 [mt_wifi])!!
[ 65.617697] 7981@C23L0,SelectClearChannelBusyTime() 1890: [SelectClearChannelBusyTime] - band1 START
[ 65.626825] 7981@C23L0,SelectClearChannelBusyTime() 1891: [SelectClearChannelBusyTime] - cfg_ht_bw = 1 vht_bw = 2
[ 65.637097] 7981@C23L0,SelectClearChannelBusyTime() 1898: ====================================================================
[ 65.648515] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 36 : Busy Time = 1968, Skip Channel = FALSE, BwCap = TRUE
[ 65.659892] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 40 : Busy Time = 1331, Skip Channel = FALSE, BwCap = TRUE
[ 65.671267] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 44 : Busy Time = 907, Skip Channel = FALSE, BwCap = TRUE
[ 65.682643] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 48 : Busy Time = 565, Skip Channel = FALSE, BwCap = TRUE
[ 65.694070] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 52 : Busy Time = 820, Skip Channel = FALSE, BwCap = TRUE
[ 65.705462] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 56 : Busy Time = 620, Skip Channel = FALSE, BwCap = TRUE
[ 65.716838] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 60 : Busy Time = 51, Skip Channel = FALSE, BwCap = TRUE
[ 65.728213] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 64 : Busy Time = 716, Skip Channel = FALSE, BwCap = TRUE
[ 65.739644] 7981@C23L0,SelectClearChannelBusyTime() 1907: ====================================================================
[ 65.751026] 7981@C23L0,SelectClearChannelBusyTime() 2174: Select Primary Channel 48 from bw160PreferCh[]!
[ 65.760579] 7981@C23L0,SelectClearChannelBusyTime() 2179: Rule 3 Channel Busy time value : Select Primary Channel 48
[ 65.771087] 7981@C23L0,SelectClearChannelBusyTime() 2181: Rule 3 Channel Busy time value : Min Channel Busy = 1968
[ 65.781427] 7981@C23L0,SelectClearChannelBusyTime() 2186: Rule 3 Channel Busy time value : BW = 160
[ 65.790480] 7981@C23L0,SelectClearChannelBusyTime() 2225: [SelectClearChannelBusyTime] - band1 END
[ 65.799500] 7981@C00L0,ApAutoChannelAtBootUp() 407: Auto channel selection: Selected channel = 48, IsAband = 1
[ 65.809518] 7981@C12L0,Adj_ZeroWait_Status_Update() 1076: Adj_ZeroWait_Status_Update(1076), Channel(48), OutBandCh(0), vht_bw(2), OutBandBw(0), BW160ZeroWaitState(0)
[ 65.824279] 7981@C12L0,Adj_ZeroWait_Status_Update() 1156: Adj_ZeroWait_Status_Update(1156), Channel(36), OutBandCh(48), vht_bw(1), OutBandBw(0), BW160ZeroWaitState(2)
[ 65.839379] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 66.090260] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 66.090361] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 66.101300] 7981@C00L0,ApAutoChannelAtBootUp() 599: <-----------------
[ 66.292354] PrintSrCmd:
[ 66.292354] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 66.292354] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 66.306382] PrintSrCmd:
[ 66.306382] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 66.306382] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 66.320380] PrintSrCmd:
[ 66.320380] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 66.320380] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 66.334383] PrintSrCmd:
[ 66.334383] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 66.334383] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 66.348482] PrintSrCmd:
[ 66.348482] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 66.348482] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 66.362563] PrintSrCmd:
[ 66.362563] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 66.362563] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 66.376692] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 66.387701] mtk_ppe_dev_register_hook : ineterface rax0 register (4)
[ 66.388515] [mtf_txpower_all_rate_info] band_idx:1 pwr:38 ChBand:5G ePAGain:0
=====>>>>>set tp_ie for vap rax0
iwpriv rax0 set tp_ie=dd1e001d0f1001600000088AF16D7FCE088AF16D7FCE45d600007FCE00010000
iwpriv rax0 set mapEnable=3
[ 66.415325] Set_Map_Proc current MAP MODE is 3
iwpriv rax0 set mapR2Enable=1
[ 66.439420] Set_MapR2_Proc MAP R2 is already enabled
[ 66.473003] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 66.479772] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
/etc/rc.common 0 true
iwpriv rax0 set SSID=MERCUSYS_7FCE_5G
[ 66.616488] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[LAG] Disabling bonding-lag-lan
[ 66.632328] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[del_tc_root] true true true true
[del_tc_root] input:
[LAG] LAG ifname[ 66.652902] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
is: lan2 lan3
[ 66.665254] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set HideSSID=0
mumimo_config rax0 1
iwpriv rax0 set MuMimo=1
iwpriv rax0 set BeaconPeriod=100[ 66.767945] sync for : ra0
[ 66.773629] sync for : ra2
[ 66.777118] sync for : rax0
iwpriv rax0 set RTSThreshold=2346
[ 66.784425] Set_RTSThreshold_Proc: set wdev5 rts length threshold=2346(0x92a)
iwpriv rax0 set FragThreshold=23[ 66.798967] Set_FragThreshold_Proc::set wdev5 FragThreshold=2346)
46
iwpriv rax0 set DtimPeriod=1
The Hqos mode is not changed.
iwpriv rax0 set WmmCapable=1
iwpriv rax0 set NoForwarding=0
iwpriv rax0 set NoForwardingBTNBSSID=0
iwpriv rax0 set UAPSDCapable=1
[ 66.852783] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 66.861997] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 66.869796] bond0 (unregistering): Released all slaves
[ 66.894815] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
General shell run!
killall -q -SIGINT rt2860apd_x
iwpriv rax0 set AuthMode=WPA2PSK
iwpriv rax0 set EncrypType=AES
iwpriv rax0 set IEEE8021X=0
iwpriv rax0 set RekeyInterval=0
iwpriv rax0 set WPAPSK=93350273
iwpriv rax0 set WscConfMode=7
iwpriv rax0 set WscConfStatus=2
iwpriv rax0 set WscVendorPinCode=93350273
iwpriv rax0 set WscLabelDisabled=0
[ 67.179064] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
iwpriv rax0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv rax0 set AccessPolicy=0
iwpriv rax0 set HideSSID=0
iwpriv rax0 set SSID=MERCUSYS_7FCE_5G
[ 67.226249] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 67.242832] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[del_tc_root] true true true true
[del_tc_root][ 67.282907] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
input:
[ 67.295545] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
saveconfig() begin
nrd: starting daemon, AP steering is on, Band steering is off
[ 67.511728] ath_band_steering_netlink_receive 161 pid = 14370
iwpriv rax0 set hw_nat_register=1
[ 67.522251] ath_band_steering_netlink_receive 161 pid = 14370
[ 67.524721] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
[ 67.536216] mtk_ppe_dev_register_hook : ra2 has been registered in wifi_hook_if table[3]
[ 67.544327] mtk_ppe_dev_register_hook : rax0 has been registered in wifi_hook_if table[4]
[ 67.552499] mtk_ppe_dev_register_hook : apcli0 has been registered in wifi_hook_if table[2]
[ 67.563900] ath_band_steering_netlink_receive 161 pid = 14370
brctl addif br-lan rax0
[ 67.599410] br-lan: port 8(rax0) entered blocking state
[ 67.604688] br-lan: port 8(rax0) entered disabled state
[ 67.610153] device rax0 entered promiscuous mode
[ 67.614934] br-lan: port 8(rax0) entered blocking state
[ 67.620154] br-lan: port 8(rax0) entered forwarding state
[ 67.632795] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
The Hqos mode is not changed.
saveconfig() end
The Hqos mode is not changed.
[ 67.775633] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 67.798339] export_store: invalid GPIO 424
start selfhealing
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
can't add rax2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax2 3 1
can't set rax2 vlan to bridge br-lan: Invalid argument
brctl ad[ 68.062722] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
dif br-lan rax4
[ 68.063855] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi[ 68.098850] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
_vap_local rax1
wireguard vpn if off, exit
[ 68.394800] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 68.401995] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 68.442636] scan_next_channel(): Partial Scan Finishd
[ 68.447853] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 68.590013] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 68.601159] Execute groupId matching rule
[ 68.605271] BssSelect: Need not to do bss select(0)
[ 68.610141] BssSelect, meshEnable 1, connSpecific 0
[ 68.615028] SetApCliEnableByWdev: I/F(apcli0) (enable = 1)
[ 68.620524] SCAN DONE, Reset FSM/CNTL IDLE.
[ 68.624793] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
[ 68.754712] [RTL8367S INFO] Detect IPTV module started
[ 68.809060] unexport_store: invalid GPIO 424
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax1
ifconfig rax1 down
[del_tc_root] true true true true
[del_tc_root] input:
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
The Hqos mode is not changed.
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
can't add rax2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax2 3 1
can't set rax2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax3
[ 69.696239] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 69.705005] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 69.711864] br-lan: port 1(eth0.2) entered blocking state
[ 69.717323] br-lan: port 1(eth0.2) entered forwarding state
[ 69.736094] [HNAT] Detect dev: eth0.2 state change, qid = 1, speed = 10
[ 69.742868] br-lan: port 2(eth0.3) entered blocking state
[ 69.748270] br-lan: port 2(eth0.3) entered forwarding state
[ 69.759672] [HNAT] Detect dev: eth0.3 state change, qid = 2, speed = 10
[ 69.766489] br-lan: port 3(eth0.4) entered blocking state
[ 69.771905] br-lan: port 3(eth0.4) entered forwarding state
[ 69.780870] [HNAT] Detect dev: eth0.4 state change, qid = 3, speed = 10
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax3
ifconfig rax3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
can't add rax2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax2 3 1
can't set rax2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apclix0
[ 70.911570] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
[ 70.931670] 7981@C12L1,rt28xx_ap_ioctl() 853: interface is down, cmd [8be1] return!!!
[ 70.953235] 7981@C12L1,rt28xx_ap_ioctl() 903: interface is down, cmd [8bf1] return!!!
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig apclix0 up
[ 71.250817] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 71.271256] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 71.284236] mtk_ppe_dev_register_hook : ineterface apclix0 register (5)
[ 71.291042] br-lan: port 6(apclix0) entered blocking state
[ 71.296560] br-lan: port 6(apclix0) entered forwarding state
[ 71.302534] br-lan: port 6(apclix0) entered disabled state
iwpriv apclix0 set mapEnable=3
[ 71.310410] Set_Map_Proc current MAP MODE is 3
iwpriv apclix0 set mapR2Enable=1[ 71.317603] Set_MapR2_Proc MAP R2 is already enabled
iwpriv apclix0 set ApCliEnable=0[ 71.326432] SetApCliEnableByWdev: I/F(apcli1) (enable = 0)
iwpriv apclix0 set ApCliAuthMode=WPAPSKWPA2PSK
iwpriv apclix0 set ApCliEncrypType=TKIPAES
iwpriv apclix0 set A[ 71.342471]
[ 71.342471] I/F(apcli1) Set_ApCli_Mesh_Rule_Enable_Proc::(enable=1)
pCliWPAPSK=643859498da3e6fcb225f9cdd1a115
iwpriv apclix0 set Ap[ 71.356075] SetApCliEnableByWdev: I/F(apcli1) (enable = 1)
CliMeshRule=1
iwpriv apclix0 set ApCliSsid=895292acce55edb97159c9a0006ea6
iwpriv apclix0 set ApCliEnable=1
brctl addif br-lan apclix0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
can't add rax2 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax2 3 1
can't set rax2 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax2
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig rax2 up
[ 71.977826] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 71.997466] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 72.008637] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[7]=25, bw_grp=16 omac=17
[ 72.019615] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 72.026863] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 72.033396] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[1] = 1
[ 72.040563] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 72.046148] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 72.051540] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 177, ACSChStat:1
[ 72.058906] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 72.078642] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 72.089863] 7981@C00L0,ApAutoChannelAtBootUp() 599: <-----------------
[ 72.096813] 7981@C12L1,SetWPAPSKKey() 1643: WPAPSK Key length(0) error, required 8 ~ 64 characters!(keyStr=)
[ 72.131202] PrintSrCmd:
[ 72.131202] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 72.131202] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 72.145333] PrintSrCmd:
[ 72.145333] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 72.145333] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 72.159443] PrintSrCmd:
[ 72.159443] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 72.159443] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 72.173611] PrintSrCmd:
[ 72.173611] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 72.173611] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 72.187830] PrintSrCmd:
[ 72.187830] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 72.187830] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 72.201956] PrintSrCmd:
[ 72.201956] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 72.201956] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 72.216237] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 72.227323] mtk_ppe_dev_register_hook : ineterface rax2 register (6)
[ 72.233777] [mtf_txpower_all_rate_info] band_idx:1 pwr:38 ChBand:5G ePAGain:0
=====>>>>>set tp_ie for vap rax2
iwpriv rax2 set tp_ie=dd1e001d[ 72.248458] Set_Map_Proc current MAP MODE is 3
0f1001640000088AF16D7FCE088AF16D7FCE45d600007FCE[ 72.255899] Set_MapR2_Proc MAP R2 is already enabled
00010000
iwpriv rax2 set mapEnable=3
iwpriv rax2 set mapR2Enable=1
iwpriv rax2 set SSID=9gWuE7wE7zJzMcyCn9jK61EorBeHe2
[ 72.368221] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 72.388630] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 72.399907] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[7]=25, bw_grp=16 omac=17
[ 72.410859] 7981@C12L1,SetWPAPSKKey() 1643: WPAPSK Key length(0) error, required 8 ~ 64 characters!(keyStr=)
iwpriv rax2 set HideSSID=1
mumimo_config rax2 1
iwpriv rax2 set MuMimo=1
iwpriv rax2 set BeaconPeriod=100[ 72.440698] sync for : ra0
[ 72.445424] sync for : ra2
[ 72.449004] sync for : rax0
[ 72.452935] sync for : rax2
iwpriv rax2 set RTSThreshold=234[ 72.459165] Set_RTSThreshold_Proc: set wdev7 rts length threshold=2346(0x92a)
6
iwpriv rax2 set FragThreshold=23[ 72.469764] Set_FragThreshold_Proc::set wdev7 FragThreshold=2346)
46
iwpriv rax2 set DtimPeriod=1
iwpriv rax2 set WmmCapable=1
iwpriv rax2 set NoForwarding=0
iwpriv rax2 set NoForwardingBTNBSSID=0
iwpriv rax2 set UAPSDCapable=1
iwpriv rax2 set AuthMode=WPA2PSK
iwpriv rax2 set EncrypType=AES
iwpriv rax2 set IEEE8021X=0
iwpriv rax2 set RekeyInterval=0
iwpriv rax2 set WPAPSK=bzGbGObCPxXVW0yQyM7WFn8cdh4Jo4
iwpriv rax2 set WscConfMode=0
iwpriv rax2 set WscConfStatus=2
iwpriv rax2 set WscLabelD[ 72.701463] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
isabled=0
iwpriv rax2 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv rax2 set AccessPolicy=0
iwpriv rax2 set HideSSID=1
iwpriv rax2 set SSID=9gWuE7wE7zJzMcyCn9j[ 72.734153] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
K61EorBeHe2
[ 72.745853] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 72.765679] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 72.776882] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[7]=25, bw_grp=16 omac=17
[ 72.793049] sta_cntl_connect_by_cfg:: can't find SSID[895292acce55edb97159c9a0006ea6] in ScanTab.
[ 72.802007] SetApCliEnableByWdev: I/F(apcli1) (enable = 0)
iwpriv rax2 set hw_nat_register=[ 72.873666] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
1
[ 72.882416] mtk_ppe_dev_register_hook : ra2 has been registered in wifi_hook_if table[3]
[ 72.890802] mtk_ppe_dev_register_hook : rax0 has been registered in wifi_hook_if table[4]
[ 72.899036] mtk_ppe_dev_register_hook : rax2 has been registered in wifi_hook_if table[6]
[ 72.907336] mtk_ppe_dev_register_hook : apcli0 has been registered in wifi_hook_if table[2]
[ 72.915694] mtk_ppe_dev_register_hook : apclix0 has been registered in wifi_hook_if table[5]
brctl addif br-lan rax2
[ 72.936914] br-lan: port 9(rax2) entered blocking state
[ 72.942488] br-lan: port 9(rax2) entered disabled state
[ 72.948092] device rax2 entered promiscuous mode
[ 72.952849] br-lan: port 9(rax2) entered blocking state
[ 72.958089] br-lan: port 9(rax2) entered forwarding state
[ 73.001047] mtk_soc_eth 15100000.ethernet eth1: configuring for fixed/2500base-x link mode
[ 73.123078] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 73.138010] S99zzzzboot_don (14969): drop_caches: 3
[ 73.180557] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 73.235552] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 73.252642] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 73.462979] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
brctl show br-lan
[ 73.568701] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
Don't need dual band temperature control!
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a [ 73.803124] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax4
[ 74.054159] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 74.066779] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 74.074166] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 74.332710] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 74.390142] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 74.445365] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 74.448492] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax4
ifconfig rax4 down
[ 74.663025] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan r[ 74.769466] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
a4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
nrd: stopping
wpsd[main:2307]: wpsd_flag: 100
nrd: 14370
wpsd[exec_cmd_with_result:298]: exec: uci get profile.@lp5523[0].message -c "/etc/profile.d" -q, result: chip-off
[ 74.983130] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
nrd: starting daemon, AP steering is on, Band steering is off
[ 75.143694] ath_band_steering_netlink_receive 161 pid = 17541
[ 75.150203] ath_band_steering_netlink_receive 161 pid = 17541
table: 0x2c2b7700
[ 75.164387] ath_band_steering_netlink_receive 161 pid = 17541
wpsd[wps_create_ibus_thread:43]: create ibus thread successfully
wpsd[wpsd_backup_run_mode:1518]: DUT RUNNING AS A SUPER REPEATER!!!
[ 75.233388] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
wpsd[wpsd_check_available_status:1319]: enabled: 1, apWpsAvailable: 3, staWpsAvailable: 3, pinEnabled: 1, pinCode:
wifi_led_set 2g = ON, 5g = ON
========= don't cli WIFI-led when not cal
[ 75.552686] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 75.554399] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 75.609534] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 75.656804] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 75.872873] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 75.977070] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 76.202937] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 76.450811] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 76.762666] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 76.763806] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 76.819528] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 76.866918] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 77.082905] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 77.187219] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 77.402919] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 77.651147] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 77.972665] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 77.973782] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 78.029595] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 78.076992] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 78.292651] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 78.397168] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 78.612725] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 78.860256] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 79.182703] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 79.183808] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 79.239550] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 79.286879] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 79.402847] sta_cntl_connect_by_cfg:: can't find SSID[e2b6520c958f5e14820332d7ee1a39] in ScanTab.
[ 79.411851] SetApCliEnableByWdev: I/F(apcli0) (enable = 0)
[ 79.418146] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 79.425172] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 79.502680] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 79.607045] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 79.733226] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 79.742366] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 79.775055] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 79.907744] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 80.155986] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 80.167319] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 80.392657] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 80.393764] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 80.449582] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 80.496960] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 80.542910] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 80.684830] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 80.712666] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 80.817055] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 80.952844] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 80.962006] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 80.994549] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 81.127654] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 81.376084] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 81.388155] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 81.612965] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 81.670242] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 81.717720] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 81.717722] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 81.763099] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 81.904699] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 81.932689] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 82.037106] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 82.172687] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 82.174341] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 82.207603] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 82.341428] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 82.591013] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 82.603203] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 82.832661] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 82.833771] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 82.889431] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 82.936641] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 82.972999] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 83.115098] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 83.152670] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 83.256806] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 83.392725] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 83.401862] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 83.434564] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 83.567906] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 83.816107] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 83.832784] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 84.052872] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 84.059942] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 84.109700] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 84.157534] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 84.203014] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 84.345484] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 84.372607] scan_next_channel(): Partial Scan Finishd
[ 84.377875] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 84.627746] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 84.638920] Execute groupId matching rule
[ 84.642971] BssSelect: Need not to do bss select(0)
[ 84.647839] BssSelect, meshEnable 1, connSpecific 0
[ 84.652726] SetApCliEnableByWdev: I/F(apcli1) (enable = 1)
[ 84.658227] SCAN DONE, Reset FSM/CNTL IDLE.
[ 84.662405] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
[ 84.669597] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 84.670707] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 84.704501] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 84.953686] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 84.960735] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 85.042869] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 85.412920] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 85.554858] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 85.842692] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 85.851855] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 85.884544] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 86.222643] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 86.592686] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 86.734571] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 87.052676] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 87.053785] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 87.087567] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 87.422558] scan_next_channel(): Partial Scan Finishd
[ 87.427698] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 87.569342] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 87.580380] Execute groupId matching rule
[ 87.584408] BssSelect: Need not to do bss select(0)
[ 87.589284] BssSelect, meshEnable 1, connSpecific 0
[ 87.594167] SetApCliEnableByWdev: I/F(apcli0) (enable = 1)
[ 87.599664] SCAN DONE, Reset FSM/CNTL IDLE.
[ 87.603855] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
[ 103.712764] sta_cntl_connect_by_cfg:: can't find SSID[895292acce55edb97159c9a0006ea6] in ScanTab.
[ 103.721792] SetApCliEnableByWdev: I/F(apcli1) (enable = 0)
[ 104.043078] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 104.044212] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 104.100549] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 104.148441] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 104.362900] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 104.468425] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 104.682980] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 104.932740] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 105.262707] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 105.271843] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 105.327078] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 105.374890] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 105.582899] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 105.688265] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 105.902965] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 106.153970] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 106.482667] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 106.484352] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 106.539491] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 106.586767] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 106.802896] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 106.907169] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 107.034011] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 107.041019] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 107.122947] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 107.372638] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 107.702758] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 107.759636] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 107.806970] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 107.806994] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 108.022960] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 108.127303] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 108.342927] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 108.593371] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 108.922680] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 108.979632] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 109.027060] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 109.033983] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 109.242737] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 109.347297] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 109.562841] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 109.814101] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 110.132764] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 110.189680] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 110.237396] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 110.237399] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 110.452729] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 110.557354] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 110.773218] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 111.023202] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 111.342710] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 111.399665] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 111.447358] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 111.452969] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 111.662794] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 111.767473] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 111.982677] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 112.233385] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 112.552762] sta_cntl_connect_by_cfg:: can't find SSID[e2b6520c958f5e14820332d7ee1a39] in ScanTab.
[ 112.561756] SetApCliEnableByWdev: I/F(apcli0) (enable = 0)
[ 112.567449] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 112.671768] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 112.679336] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 112.686539] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 112.882989] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 112.987562] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 112.995309] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 113.004514] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 113.037293] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 113.202833] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 113.453259] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 113.464497] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 113.772734] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 113.781912] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 113.836470] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 113.883686] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 113.891477] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 114.033813] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 114.092693] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 114.196941] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 114.332689] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 114.333798] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 114.367453] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 114.505796] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 114.757424] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 114.771339] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 114.993179] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 115.050095] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 115.097725] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 115.102649] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 115.153034] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 115.295383] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 115.312585] scan_next_channel(): Partial Scan Finishd
[ 115.317791] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 115.568917] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 115.580019] Execute groupId matching rule
[ 115.584093] BssSelect: Need not to do bss select(0)
[ 115.589002] BssSelect, meshEnable 1, connSpecific 0
[ 115.593947] SetApCliEnableByWdev: I/F(apcli1) (enable = 1)
[ 115.599488] SCAN DONE, Reset FSM/CNTL IDLE.
[ 115.603703] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
[ 115.610962] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 115.645930] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 115.785593] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 116.002895] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 116.372905] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 116.514814] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 116.762694] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 116.771828] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 116.804530] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 117.142896] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 117.512920] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 117.655144] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 117.992664] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 117.993783] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 118.027552] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 118.161563] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 118.168688] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 118.362880] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 118.732958] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 118.875281] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 119.203020] perform_channel_change 2814: Channel change to 48, send_event_to_network_roaming
[ 119.203112] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 119.220938] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 119.380191] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 119.592634] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 119.962674] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 120.104746] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 120.412675] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 120.447570] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 120.580725] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 120.648637] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 120.655806] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 120.658679] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 120.792570] scan_next_channel(): Partial Scan Finishd
[ 120.797718] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 121.045910] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 121.045932] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 121.068062] Execute groupId matching rule
[ 121.072129] BssSelect: Need not to do bss select(0)
[ 121.072267] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 121.077045] BssSelect, meshEnable 1, connSpecific 0
[ 121.091061] SetApCliEnableByWdev: I/F(apcli0) (enable = 1)
[ 121.096644] SCAN DONE, Reset FSM/CNTL IDLE.
[ 121.100862] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
[ 121.108439] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 121.121273] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 121.140950] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 121.154371] mtwf_dbg_prt: vsnprintf error
[ 121.158377] 7981@C23L1,ReleaseChannelOpChargeForCurrentOwner() 1491: caller:Dot11HCntDownTimeoutAction+0x514/0x7d0 [mt_wifi]. Try to release an empty owner_bit_mask!! done
[ 121.213465] ath_band_steering_netlink_receive 161 pid = 17541
[ 130.272756] sta_cntl_connect_by_cfg:: can't find SSID[895292acce55edb97159c9a0006ea6] in ScanTab.
[ 141.352920] sta_cntl_connect_by_cfg:: can't find SSID[895292acce55edb97159c9a0006ea6] in ScanTab.
[ 141.361952] SetApCliEnableByWdev: I/F(apcli1) (enable = 0)
[ 141.682982] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 141.684107] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 141.740444] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 141.788357] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 142.002924] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 142.108546] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 142.322940] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 142.573367] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 142.902853] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 142.912029] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 142.967231] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 143.015066] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 143.232904] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 143.338367] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 143.552913] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 143.802786] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 144.132758] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 144.134382] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 144.189562] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 144.243987] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 144.452901] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 144.557175] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 144.772926] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 145.022035] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 145.352715] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 145.361859] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 145.416570] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 145.463930] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 145.672878] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 145.777300] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 145.792756] sta_cntl_connect_by_cfg:: can't find SSID[e2b6520c958f5e14820332d7ee1a39] in ScanTab.
[ 145.801793] SetApCliEnableByWdev: I/F(apcli0) (enable = 0)
[ 145.808025] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 145.815057] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 145.992923] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 146.241649] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 146.252781] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 146.254948] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 146.287671] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 146.562662] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 146.563782] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 146.619611] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 146.667021] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 146.674503] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 146.882750] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 146.987285] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 147.052971] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 147.195462] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 147.206638] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 147.456458] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 147.467683] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 147.635696] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 147.642796] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 147.782669] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 147.783772] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 147.839566] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 147.886919] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 147.894649] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 148.102630] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 148.207083] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 148.273026] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 148.415396] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 148.426582] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 148.677294] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 148.688459] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 148.856473] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 148.863574] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 149.002686] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 149.003790] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 149.059618] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 149.107010] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 149.115177] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 149.322784] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 149.427542] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 149.492914] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 149.635664] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 149.646829] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 149.896598] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 149.907778] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 149.909990] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 149.942711] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 150.222974] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 150.252921] [RTL8367S INFO] UTP_PORT0 link up speed 1000
[ 150.259231] [HNAT] Detect dev: eth0.2 state change, qid = 1, speed = 1000
[ 150.280467] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 150.327987] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 150.327991] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 150.342612] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 150.542652] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 150.647133] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 150.712910] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 150.855505] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 150.866715] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 151.117518] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 151.128744] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 151.297044] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 151.304154] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 151.333667] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 151.340679] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 151.442709] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 151.451852] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 151.506416] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 151.553649] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 151.561392] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 151.762633] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 151.866915] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 151.932915] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 152.074721] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 152.085896] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 152.337133] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 152.348350] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 152.516495] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 152.523603] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 152.662670] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 152.663774] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 152.719518] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 152.766816] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 152.774296] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 152.982614] scan_next_channel(): Partial Scan Finishd
[ 152.987845] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 153.238610] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 153.249737] Execute groupId matching rule
[ 153.253801] BssSelect: Need not to do bss select(0)
[ 153.258706] BssSelect, meshEnable 1, connSpecific 0
[ 153.263611] SetApCliEnableByWdev: I/F(apcli1) (enable = 1)
[ 153.269183] SCAN DONE, Reset FSM/CNTL IDLE.
[ 153.273431] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
[ 153.280677] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 153.422521] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 153.652723] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
File: /tmp/group-info isn't existed.
vap name : rax0
vap name : apclix0
vap name : rax1
vap name : rax2
vap name : rax4
[ 153.687676] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
vap name : ra0
vap name : apcli0
vap name : ra1
vap name : ra2
vap name : ra4
map config params:
sysmode: router
role: agent
map_profile: 2
brname: br-lan
devname: MR85X
manufacturer_name: Mercusys
manufacturer_model:MR85X V1.0
registrar: off
multi_chan: off
guest_network: off
sup_steer: off
sup_usta_chan: off
sup_usta_nonechan: off
radio info:
name: wifi0
band: 2.4g
channel: 3
bandwidth: 0
max_bss_support: 3
nss: 2
name: wifi1
band: 5g
channel: 48
bandwidth: 3
max_bss_support: 3
nss: 2
interface info:
name: br-lan
type: bridge
enable: 1
name: eth0.2
type: ether
enable: 1
name: eth0.3
type: ether
enable: 1
name: eth0.4
type: ether
enable: 1
name: apcli0
type: wireless
enable: 1
maptype:bSTA
parent: wifi0
guest: 0
vifnum: 0
name: ra0
type: [ 153.828843] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
wireless
enable: 1
maptype:fBSS
parent: wifi0
guest: 0
vifnum: 0
name: ra2
type: wireless
enable: 1
maptype:bBSS
parent: wifi0
guest: 0
vifnum: 0
name: apclix0
type: wireless
enable: 1
maptype:bSTA
parent: wifi1
guest: 0
vifnum: 0
name: rax0
type: wireless
enable: 1
maptype:fBSS
parent: wifi1
guest: 0
vifnum: 0
name: rax2
type: wireless
enable: 1
maptype:bBSS
parent: wifi1
guest: 0
vifnum: 0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
>>[main,275] agent_register_ieee1905_callbacks initialed
basic cap: 0x0
interface config:
ifname: br-lan
enable: 1
media: 0x8000
mapflag:0x0
ifname: eth0.2
enable: 1
media: 0x9002
mapflag:0x0
ifname: eth0.3
enable: 1
media: 0x9002
mapflag:0x0
ifname: eth0.4
enable: 1
media: 0x9002
mapflag:0x0
ifname: apcli0
enable: 1
media: 0x9001
mapflag:0x4
ifname: ra0
enable: 1
media: 0x9001
mapflag:0x1
ifname: ra2
enable: 1
media: 0x9001
mapflag:0x2
ifname: apclix0
enable: 1
media: 0x9001
mapflag:0x4
ifname: rax0
enable: 1
media: 0x9001
mapflag:0x1
ifname: rax2
enable: 1
media: 0x9001
mapflag:0x2
ifname: rax4
enable: 0
media: 0x9001
mapflag:0x2
config radio list:
radio name: wifi0 vap list: apcli0, ra0, ra2,
radio name: wifi1 vap list: apclix0, rax0, rax2,
>>[map_get_adptr_config,1606] get br-lan mac:08:8A:F1:6D:7F:CE as almac
adptr config:
multi_ap_mode: 0x2
device_mode: 0x2
freq_band_2g_enable: 1
freq_band_5g_enable: 1
backhaul_type: 0
topo_query_timeout: 3000
topo_query_retries: 7
1905 MAC: 08:8a:f1:6d:7f:ce
Agent>>[map_ieee1905_device_init,661] Received callback: Device[08:8A:F1:6D:7F:CE] got added
Agent>>[map_device_array_add,265] device array need OS_REALLOC, used=0
Agent>>[map_device_array_add,267] resize=32
[ 154.052573] scan_next_channel(): Partial Scan Finishd
[ 154.057726] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 154.199945] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 154.211003] Execute groupId matching rule
[ 154.215045] BssSelect: Need not to do bss select(0)
[ 154.219911] BssSelect, meshEnable 1, connSpecific 0
[ 154.224796] SetApCliEnableByWdev: I/F(apcli0) (enable = 1)
[ 154.230292] SCAN DONE, Reset FSM/CNTL IDLE.
[ 154.234503] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_interface_info,1502] map_pltfrm_get_interface_info fail
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_interface_info,1502] map_pltfrm_get_interface_info fail
Agent>>[main,278] ieee1905 initialed
socket non-blocking already set. flags=2050Agent>>[main,282] map_ubus initialed
Agent>>[main,286] map_netlink initialed
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_interface_info,1502] map_pltfrm_get_interface_info fail
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_interface_info,1502] map_pltfrm_get_interface_info fail
I5_ERR[mtk_platform_get_bssid_by_ifname, 339]apclix0 not Associa
I5_ERR[mtk_platform_get_bssid_by_ifname, 339]apcli0 not Associa
IEEE1905-Agent >> ieee1905_check_reseting_factory_status(82) : Reseting factory check: Self is not reseting factory
Agent>>[main,293] ieee1905_start
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 172.333053] sta_cntl_connect_by_cfg:: can't find SSID[895292acce55edb97159c9a0006ea6] in ScanTab.
[ 172.342011] SetApCliEnableByWdev: I/F(apcli1) (enable = 0)
[ 172.663016] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 172.672161] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 172.727397] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 172.775304] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 172.992895] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 173.098505] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 173.312945] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 173.564288] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 173.565358] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 173.582451] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 173.892831] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 173.950225] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 173.998083] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 174.005365] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 174.222910] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 174.328380] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 174.542937] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 174.794288] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 175.112676] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 175.170076] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 175.217436] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 175.217453] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 175.432889] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 175.537129] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 175.752928] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 176.004198] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 176.342670] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 176.343806] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 176.399557] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 176.446922] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 176.662902] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 176.767305] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 176.983149] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 177.232815] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 177.552698] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 177.561836] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 177.616595] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 177.664195] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 177.872663] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 177.977173] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 178.192676] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 178.442295] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 178.792674] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 178.793773] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 178.849552] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 178.896907] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 179.012952] sta_cntl_connect_by_cfg:: can't find SSID[e2b6520c958f5e14820332d7ee1a39] in ScanTab.
[ 179.014999] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 179.021909] SetApCliEnableByWdev: I/F(apcli0) (enable = 0)
[ 179.029329] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 179.112654] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 179.217052] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 179.343117] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 179.378086] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 179.517761] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 179.524967] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 179.776560] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 179.787852] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 180.113150] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 180.170398] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 180.217837] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 180.225114] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 180.232589] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 180.375058] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 180.432661] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 180.537284] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 180.672678] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 180.840933] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 180.848159] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 180.857336] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 181.103998] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 181.116653] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 181.442742] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 181.443835] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 181.499702] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 181.547093] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 181.554837] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 181.697741] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 181.762659] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 181.866966] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 181.992673] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 181.993784] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 182.027603] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 182.160805] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 182.409165] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 182.421220] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 182.652698] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 182.661833] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 182.716388] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 182.763620] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 182.792909] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 182.936006] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 182.972689] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 183.076901] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 183.212784] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 183.221930] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 183.254633] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 183.387740] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 183.636467] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 183.648778] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 183.872699] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 183.881876] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 183.936508] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcl[ 183.983831] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
i0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 184.022914] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 184.165707] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 184.192575] scan_next_channel(): Partial Scan Finishd
[ 184.197734] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 184.448010] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 184.459064] Execute groupId matching rule
[ 184.463093] BssSelect: Need not to do bss select(0)
[ 184.467960] BssSelect, meshEnable 1, connSpecific 0
[ 184.472847] SetApCliEnableByWdev: I/F(apcli1) (enable = 1)
[ 184.478346] SCAN DONE, Reset FSM/CNTL IDLE.
[ 184.482524] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
[ 184.489699] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 184.490818] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 184.524621] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 184.658824] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 184.665902] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 184.862890] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_interface_info,1502] map_pltfrm_get_interface_info fail
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_interface_info,1502] map_pltfrm_get_interface_info fail
[ 185.232897] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 185.375291] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 185.652989] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 185.688421] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 185.823996] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 186.032650] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 186.402717] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 186.545086] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 186.782963] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 186.821336] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 186.955203] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 187.162566] scan_next_channel(): Partial Scan Finishd
[ 187.167713] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 187.310304] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 187.321339] Execute groupId matching rule
[ 187.325371] BssSelect: Need not to do bss select(0)
[ 187.330236] BssSelect, meshEnable 1, connSpecific 0
[ 187.335124] SetApCliEnableByWdev: I/F(apcli0) (enable = 1)
[ 187.340619] SCAN DONE, Reset FSM/CNTL IDLE.
[ 187.344815] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 205.562766] sta_cntl_connect_by_cfg:: can't find SSID[895292acce55edb97159c9a0006ea6] in ScanTab.
[ 205.571762] SetApCliEnableByWdev: I/F(apcli1) (enable = 0)
[ 205.893032] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 205.902183] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 205.957473] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 206.005371] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 206.222959] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 206.328466] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 206.543027] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 206.793041] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 206.805670] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 206.812832] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 207.102763] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 207.160205] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 207.215372] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 207.217415] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 207.432974] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 207.538421] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 207.753148] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 208.003384] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 208.312718] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 208.314367] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 208.369574] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 208.417206] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 208.632949] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 208.737484] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 208.962992] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 209.213680] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 209.522860] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 209.531999] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 209.586671] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 209.634039] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 209.842924] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 209.947352] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 210.162937] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 210.413280] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 210.742662] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 210.743769] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 210.799623] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 210.848418] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 211.072700] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 211.177225] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 211.392714] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 211.644039] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 211.962704] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 211.971841] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 212.026523] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 212.073857] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 212.182766] sta_cntl_connect_by_cfg:: can't find SSID[e2b6520c958f5e14820332d7ee1a39] in ScanTab.
[ 212.191757] SetApCliEnableByWdev: I/F(apcli0) (enable = 0)
[ 212.198023] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 212.205075] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 212.282658] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 212.387054] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 212.513169] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 212.513966] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 212.548202] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 212.681148] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 212.932147] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 212.943453] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 213.182666] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 213.183774] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 213.239574] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 213.286954] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 213.312902] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 213.455282] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 213.502646] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 213.607199] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 213.732712] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 213.741872] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 213.749027] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 213.908672] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 214.159778] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 214.171845] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 214.392946] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 214.394302] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 214.449867] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 214.497262] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 214.563000] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 214.705387] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 214.722674] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 214.827245] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 214.952685] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 214.954341] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 214.987626] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 215.121300] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_interface_info,1502] map_pltfrm_get_interface_info fail
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_interface_info,1502] map_pltfrm_get_interface_info fail
[ 215.372187] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 215.384255] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 215.622704] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 215.631860] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 215.686429] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 215.733678] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 215.752911] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 215.895715] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 215.942659] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 216.046890] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 216.172659] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 216.176838] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 216.207587] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 216.340502] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 216.591583] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 216.603613] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 216.832657] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 216.833768] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 216.889506] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 216.937105] scan_type_stay_time_checker():Force Scan Active For Onemesh Enable
[ 216.982935] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfr[ 217.125513] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
m_get_bssid fail apclix0
[ 217.162577] scan_next_channel(): Partial Scan Finishd
[ 217.167788] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 217.418570] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 217.429676] Execute groupId matching rule
[ 217.433752] BssSelect: Need not to do bss select(0)
[ 217.438696] BssSelect, meshEnable 1, connSpecific 0
[ 217.443597] SetApCliEnableByWdev: I/F(apcli1) (enable = 1)
[ 217.449135] SCAN DONE, Reset FSM/CNTL IDLE.
[ 217.453340] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
[ 217.460612] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 217.495536] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 217.629603] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 217.713685] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 217.720701] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 217.842888] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 218.212914] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 218.355631] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 218.602663] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 218.603772] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 218.637554] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 218.972630] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 219.342665] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 219.485311] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 219.732669] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 219.733781] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 219.767570] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 220.102560] scan_next_channel(): Partial Scan Finishd
[ 220.107717] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 220.250384] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 220.261439] Execute groupId matching rule
[ 220.265481] BssSelect: Need not to do bss select(0)
[ 220.270347] BssSelect, meshEnable 1, connSpecific 0
[ 220.275234] SetApCliEnableByWdev: I/F(apcli0) (enable = 1)
[ 220.280737] SCAN DONE, Reset FSM/CNTL IDLE.
[ 220.284940] 7981@C00L0,cntl_scan_conf() 673: scan done, reenable ApCliEnable
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
saveconfig() begin
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
[ 234.302620] 7981@C09L1,sta_wait_ifdown() 864: sta idx [0] can't reset fsm within 500ms, do reset in main thread
saveconfig() begin
[ 234.992612] WiFi@C13L1,mlme_bss_clear() 1035: mlme can't polling to idle, timeout
[ 235.043195] extif_put_dev(apcli0)
[ 235.046510] mtk_ppe_dev_unregister_hook : ineterface apcli0 set null (2)
[ 235.054431] br-lan: port 5(apcli0) entered disabled state
saveconfig() end
[ 235.572598] 7981@C09L1,sta_wait_ifdown() 864: sta idx [1] can't reset fsm within 500ms, do reset in main thread
[ 235.582931] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 235.602670] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 236.272640] WiFi@C13L1,mlme_bss_clear() 1035: mlme can't polling to idle, timeout
[ 236.340946] extif_put_dev(apclix0)
[ 236.344483] mtk_ppe_dev_unregister_hook : ineterface apclix0 set null (5)
[ 236.351455] br-lan: port 6(apclix0) entered disabled state
[ 236.360183] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
I5_ERR[mtk_platform_get_bssid_by_ifname, 339]apclix0 not Associa
[ 236.411727] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
I5_ERR[mtk_platform_get_bssid_by_ifname, 339]apcli0 not Associa
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associate[ 236.597943] 7981@C12L1,rt28xx_ap_ioctl() 853: interface is down, cmd [8be1] return!!!
d
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
[ 236.665598] 7981@C12L1,rt28xx_ap_ioctl() 853: interface is down, cmd [8be1] return!!!
[ 236.677767] 7981@C12L1,rt28xx_ap_ioctl() 903: interface is down, cmd [8bf1] return!!!
[ 236.687221] 7981@C12L1,rt28xx_ap_ioctl() 903: interface is down, cmd [8bf1] return!!!
I5_ERR[mtk_platform_get_bssid_by_ifname, 339]apclix0 not Associa
[ 236.823882] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
[ 236.882404] 7981@C12L1,rt28xx_ap_ioctl() 886: interface is down, cmd [8beb] return!!!
MAP_ERR[mtk_get_bssid, 611]apcli0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apcli0
MAP_ERR[mtk_get_bssid, 611]apclix0 not Associated
Agent>>[blanket_get_bssid,2076] map_pltfrm_get_bssid fail apclix0
wpsd[main:2307]: wpsd_flag: 100
Agent>>[ieee1905_signal_hdlr,102] sig[15]
Agent>>[ieee1905_exit,90] CLOSING IEEE1905
Shutting down 1905
Agent>>[map_ieee1905_device_deinit,667] Received callback: Device[08:8A:F1:6D:7F:CE] got removed
Agent>>[map_update_ieee1905_device_list_file,994] self is not controller
saveconfig() begin
saveconfig() end
File: /tmp/group-info isn't existed.
vap name : rax0
vap name : apclix0
vap name : rax1
vap name : rax2
vap name : rax4
vap name : ra0
vap name : apcli0
vap name : ra1
vap name : ra2
vap name : ra4
map config params:
sysmode: router
role: controller
map_profile: 2
brname: br-lan
devname: MR85X
manufacturer_name: Mercusys
manufacturer_model:MR85X V1.0
registrar: on
multi_chan: off
guest_network: off
sup_steer: off
sup_usta_chan: off
sup_usta_nonechan: off
radio info:
name: wifi0
band: 2.4g
channel: 3
bandwidth: 0
max_bss_support: 3
nss: 2
name: wifi1
band: 5g
channel: 48
bandwidth: 3
max_bss_support: 3
nss: 2
interface info:
name: br-lan
type: bridge
enable: 1
name: eth0.2
type: ether
enable: 1
name: eth0.3
type: ether
enable: 1
name: eth0.4
type: ether
enable: 1
name: ra0
type: wireless
enable: 1
maptype:fBSS
parent: wifi0
guest: 0
vifnum: 0
name: ra2
type: wireless
enable: 1
maptype:bBSS
parent: wifi0
guest: 0
vifnum: 0
name: ra4
type: wireless
enable: 1
maptype:bBSS
parent: wifi0
guest: 0
vifnum: 0
name: rax0
type: wireless
enable: 1
maptype:fBSS
parent: wifi1
guest: 0
vifnum: 0
name: rax2
type: wireless
enable: 1
maptype:bBSS
parent: wifi1
guest: 0
vifnum: 0
name: rax4
type: wireless
enable: 1
maptype:bBSS
parent: wifi1
guest: 0
vifnum: 0
>>[map_get_basic_common_vlan_config,1661] Primary VLAN ID[10] Secondary VLAN ID[20] Default PCP[0] Flags[0]
>>[controller_read_vlan_config,457] Failed to load traffic separation policy either due to guest is not enabled or failed to read the data
>>[main,658] controller_read_vlan_config initialed
basic cap: 0x0
interface config:
ifname: br-lan
enable: 1
media: 0x8000
mapflag:0x0
ifname: eth0.2
enable: 1
media: 0x9002
mapflag:0x0
ifname: eth0.3
enable: 1
media: 0x9002
mapflag:0x0
ifname: eth0.4
enable: 1
media: 0x9002
mapflag:0x0
ifname: ra0
enable: 1
media: 0x9001
mapflag:0x1
ifname: ra2
enable: 1
media: 0x9001
mapflag:0x2
ifname: ra4
enable: 1
media: 0x9001
mapflag:0x2
ifname: rax0
enable: 1
media: 0x9001
mapflag:0x1
ifname: rax2
enable: 1
media: 0x9001
mapflag:0x2
ifname: rax4
enable: 1
media: 0x9001
mapflag:0x2
config radio list:
radio name: wifi0 vap list: ra0, ra2, ra4,
radio name: wifi1 vap list: rax0, rax2, rax4,
>>[map_get_adptr_config,1606] get br-lan mac:08:8A:F1:6D:7F:CE as almac
adptr config:
multi_ap_mode: 0x1
device_mode: 0x1
freq_band_2g_enable: 1
freq_band_5g_enable: 1
backhaul_type: 0
topo_query_timeout: 3000
topo_query_retries: 7
1905 MAC: 08:8a:f1:6d:7f:ce
Controller>>[map_ieee1905_device_init,106] Received callback: Device[08:8A:F1:6D:7F:CE] got added
Controller>>[map_device_array_add,265] device array need OS_REALLOC, used=0
Controller>>[map_device_array_add,267] resize=32
socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050[i5GlueAddPrivateBackhaulInterface, 1188] Add private backhaul interface ra4
socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050[i5GlueAddPrivateBackhaulInterface, 1188] Add private backhaul interface rax4
Controller>>[main,660] ieee1905 initialed
no need to generate onemesh group id
Controller>>[controller_add_bssinfo_to_controller,225]
ifname [ra2]
band [0x1]
SSID [QvtNGxlLupdotioxeBqNHYzEmUi4tk]
AuthType [32]
EncryptType [8]
key [8VwEYmXBF2PYWzwNce1lJfXdTmzEXw]
map_flag [0x2]
closed[0]
disabled[0]
Controller>>[controller_add_bssinfo_to_controller,273]
ifname [ra0]
band [0x1]
SSID [MERCUSYS_7FCE]
AuthType [32]
EncryptType [8]
key [93350273]
map_flag [0x1]
closed[0]
disabled[0]
Controller>>[controller_add_bssinfo_to_controller,321]
ifname [(null)]
band [0x1]
SSID [MERCUSYS_Guest_7FCE]
AuthType [1]
EncryptType [1]
key [93350273]
map_flag [0x9]
closed[0]
disabled[1]
Controller>>[controller_add_bssinfo_to_controller,225]
ifname [rax2]
band [0x6]
SSID [9gWuE7wE7zJzMcyCn9jK61EorBeHe2]
AuthType [32]
EncryptType [8]
key [bzGbGObCPxXVW0yQyM7WFn8cdh4Jo4]
map_flag [0x2]
closed[0]
disabled[0]
Controller>>[controller_add_bssinfo_to_controller,273]
ifname [rax0]
band [0x6]
SSID [MERCUSYS_7FCE_5G]
AuthType [32]
EncryptType [8]
key [93350273]
map_flag [0x1]
closed[0]
disabled[0]
Controller>>[controller_add_bssinfo_to_controller,321]
ifname [(null)]
band [0x6]
SSID [MERCUSYS_Guest_7FCE_5G]
AuthType [1]
EncryptType [1]
key [93350273]
map_flag [0x9]
closed[0]
disabled[1]
Controller>>[main,663] controller_add_bssinfo initialed
socket non-blocking already set. flags=2050Controller>>[main,669] map_ubus initialed
Controller>>[main,673] map_netlink initialed
Controller>>[main,677] pre_config initialed
IEEE1905-Controller >> ieee1905_check_reseting_factory_status(82) : Reseting factory check: Self is not reseting factory
Controller>>[main,684] ieee1905_start
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
1 and 00 and 900
gmtoff: 2:00 and tz: -2:00
GMT-2:00DST-3:00,M3.4.0/1,M10.5.0/1
Notify update comp:TIME
{"5G":{"ssid":"0xDEADBEEF","encryption":"psk","enable":1,"wep_format1":"hex","wep_key1":"1234567890","wep_mode":"auto","psk_version":"rsn","backhaul_key":"bzGbGObCPxXVW0yQyM7WFn8cdh4Jo4","psk_key":"F4k3nsz1t.8","channel":0,"backhaul_ssid":"9gWuE7wE7zJzMcyCn9jK61EorBeHe2","hide_ssid":0,"wep_type1":"64","psk_cipher":"aes"},"2.4G":{"ssid":"0xDEADBEEF","encryption":"psk","enable":1,"wep_format1":"hex","wep_key1":"1234567890","wep_mode":"auto","psk_version":"rsn","backhaul_key":"8VwEYmXBF2PYWzwNce1lJfXdTmzEXw","psk_key":"F4k3nsz1t.8","channel":0,"backhaul_ssid":"QvtNGxlLupdotioxeBqNHYzEmUi4tk","hide_ssid":0,"wep_type1":"64","psk_cipher":"aes"}}
saveconfig() begin
saveconfig() end
Controller>>[map_get_basic_common_vlan_config,1661] Primary VLAN ID[10] Secondary VLAN ID[20] Default PCP[0] Flags[0]
Controller>>[controller_read_vlan_config,457] Failed to load traffic separation policy either due to guest is not enabled or failed to read the data
Controller>>[controller_add_bssinfo_to_controller,225]
ifname [ra2]
band [0x1]
SSID [QvtNGxlLupdotioxeBqNHYzEmUi4tk]
AuthType [32]
EncryptType [8]
key [8VwEYmXBF2PYWzwNce1lJfXdTmzEXw]
map_flag [0x2]
closed[0]
disabled[0]
Controller>>[controller_add_bssinfo_to_controller,273]
ifname [ra0]
band [0x1]
SSID [0xDEADBEEF]
AuthType [32]
EncryptType [8]
key [F4k3nsz1t.8]
map_flag [0x1]
closed[0]
disabled[0]
Controller>>[controller_add_bssinfo_to_controller,321]
ifname [(null)]
band [0x1]
SSID [MERCUSYS_Guest_7FCE]
AuthType [1]
EncryptType [1]
key [93350273]
map_flag [0x9]
closed[0]
disabled[1]
Controller>>[controller_add_bssinfo_to_controller,225]
ifname [rax2]
band [0x6]
SSID [9gWuE7wE7zJzMcyCn9jK61EorBeHe2]
AuthType [32]
EncryptType [8]
key [bzGbGObCPxXVW0yQyM7WFn8cdh4Jo4]
map_flag [0x2]
closed[0]
disabled[0]
Controller>>[controller_add_bssinfo_to_controller,273]
ifname [rax0]
band [0x6]
SSID [0xDEADBEEF]
AuthType [32]
EncryptType [8]
key [F4k3nsz1t.8]
map_flag [0x1]
closed[0]
disabled[0]
Controller>>[controller_add_bssinfo_to_controller,321]
ifname [(null)]
band [0x6]
SSID [MERCUSYS_Guest_7FCE_5G]
AuthType [1]
EncryptType [1]
key [93350273]
map_flag [0x9]
closed[0]
disabled[1]
cable mode skip usbmode
ppp share is supported
saveconfig() begin
saveconfig() end
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
wifi_vap ra0 rax0
wifi_reload_local
wifi_led_set 2g = ON, 5g = ON
========= don't cli WIFI-led when not cal
wifi_shutdown_interface wifi0
saveconfig() begin
saveconfig() begin
saveconfig() end
set_inet_proto reload
saveconfig() end
set_inet_proto return
saveconfig() begin
Sleep 2 seconds(wifi_shutdown_interface)
ifconfig ra0 down
[ 309.774949] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 309.795917] extif_put_dev(ra0)
[ 309.798969] mtk_ppe_dev_unregister_hook : ineterface ra0 set null (1)
[ 309.808629] br-lan: port 4(ra0) entered disabled state
ifconfig ra1 down
ifconfig ra3 down
ifconfig apcli0 down
ifconfig ra2 down
[ 309.833616] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(2) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 309.851032] extif_put_dev(ra2)
[ 309.854132] mtk_ppe_dev_unregister_hook : ineterface ra2 set null (3)
[ 309.863677] br-lan: port 7(ra2) entered disabled state
ifconfig ra4 down
wifi_config_profile wifi0
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
1 and 00 and 900
gmtoff: 2:00 and tz: -2:00
GMT-2:00DST-3:00,M3.4.0/1,M10.5.0/1
Notify update comp:TIME
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
cable mode skip usbmode
ppp share is supported
saveconfig() begin
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
saveconfig() end
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
saveconfig() begin
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
saveconfig() end
config_profile_set, SSID1=0xDEADBEEF>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
saveconfig() begin
config_profile_set, SSID2=MERCUSYS_Guest_7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra3 skipped
=====>>>>> wifi0: vif apcli0 skipped
config_profile_set, SSID3=QvtNGxlLupdotioxeBqNHYzEmUi4tk>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra4 skipped
saveconfig() end
config_profile_set, WirelessMode=16>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_BW=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BSSCoexistence=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, Channel=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
cable mode skip usbmode
saveconfig() begin
config_profile_set, AutoChannelSelect=3>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
saveconfig() end
config_profile_set, MuOfdmaDlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaUlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TWTSupport=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
wifi_shutdown_interface wifi1
Sleep 2 seconds(wifi_shutdown_interface)
ifconfig rax0 down
[ 317.741834] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 317.756891] extif_put_dev(rax0)
[ 317.760027] mtk_ppe_dev_unregister_hook : ineterface rax0 set null (4)
[ 317.768790] br-lan: port 8(rax0) entered disabled state
ifconfig rax1 down
ifconfig rax3 down
ifconfig apclix0 down
ifconfig rax2 down
[ 317.789777] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(7) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 317.805845] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 317.817784] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(1) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 317.829410] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(2) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 317.841036] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(3) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 317.852678] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(4) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 317.864287] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 317.876134] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(6) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 317.887792] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(7) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 317.899475] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(8) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 317.911101] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(9) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 317.922963] ch_switch_monitor_exit:: Exit
[ 317.931993] current sync CR = 0x7
[ 317.935373] current sync CR = 0x7
[ 317.939682] current sync CR = 0x7
[ 317.944030] current sync CR = 0x7
[ 317.948335] current sync CR = 0x1
[ 318.052277] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 0
[ 318.058019] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 0
[ 318.063783] warp_woctrl_send_msg_and_wait_cr(), idx:0, state:DISABLE
[ 318.070136] warp_woctrl_send_msg_and_wait_cr(): wait for wocpu
[ 318.076012] [tmp]warp_woctrl_send_msg_and_wait_cr(): wait for wocpu, value:1, value_done:1
[ 318.084295] warp_woctrl_send_msg_and_wait_cr(): wocpu is ready, done_value:1
[ 318.091332] warp_woctrl_kickout(), idx: 0, state:HALT
[ 318.096405] warp_woctrl_kickout(): wait for wocpu
[ 318.101100] [tmp]warp_woctrl_kickout(): wait for wocpu, value:7, value_done:7
[ 318.108255] warp_woctrl_kickout(): wocpu is ready, done_value:7
[ 318.136276] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 318.146279] [Nop_List_Backup] NopList Channel count:0 <----
[ 318.242604] wed_ser_task(): wed_ser exist, wed->irq=7!
[ 318.253495] wo_exception_exit(0): wo_exception_exit done
[ 318.258838] warp_msg_receive(),go,warp,8503,0
[ 318.263253] warp_msg_process(): module id(0), wed_idx(0), something wrong(ret = -1)
[ 318.270953] warp_msg_unregister():done
[ 318.274900] warp_client_remove(): warp entry clear done!!
[ 318.280298] extif_put_dev(rax2)
[ 318.283481] mtk_ppe_dev_unregister_hook : ineterface rax2 set null (6)
[ 318.292138] br-lan: port 9(rax2) entered disabled state
ifconfig rax4 down
wifi_config_profile wifi1
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID1=0xDEADBEEF>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE_5G>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax3 skipped
=====>>>>> wifi1: vif apclix0 skipped
config_profile_set, SSID3=9gWuE7wE7zJzMcyCn9jK61EorBeHe2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax4 skipped
config_profile_set, WirelessMode=17>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_BW=2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, Channel=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSelect=3>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSkipList=100;104;108;112;116;120;124;128;132;136;140>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, IEEE80211H=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWait=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsDedicatedZeroWait=3>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWaitDefault=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaDlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaUlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TWTSupport=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
Node 0, zone DMA32 534 496 338 156 116 101 48 16 7 4 69
wifi_start_interface wifi0
wifi_vap_local ra0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig ra0 up
[ 321.485495] client_get_axi_slot_id(): wrong BUS_TYPE
[ 321.490457] warp_cap_support(): chip_id=7981 is in WHNAT support list
[ 321.496980] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entry: 000000001ad8d815
[ 321.505675] client_hif_specific_get(): hw->base_phy_addr 0x18000000!!
[ 321.512100] client_chip_specific_get(): 0x7981 chip id 0x7981!!
[ 321.518128] warp_entry_get_by_pdev(): return entry[0]
[ 321.523353] warp_msg_register():warp,pid,2353,id,0,wed_idx,0
[ 321.529003] warp_dev1 15010000.wed: Using 32bit DMA for streaming map
[ 321.535472] warp_dev1 15010000.wed: Using 32bit DMA for coherent map
[ 321.541851] wed_init(0): res_start = 0x15010000, size = 1000, irq=7,base_addr=0xffffffc01192d000
[ 321.551170] wed_ring_init(): wed tx ring init result = 0
[ 321.557007] wed_ring_init(): wed rx ring init result = 0
[ 321.571845] create wed ok!!!
[ 321.574791] wdma_init(): wdma(0) base_addr=0xffffffc011935800, base_phy_addr=0x15104800
[ 321.583650] warp_woif_bus_init_hw(): bus:000000003fa799db, txring: 20, pa: 0x0000000055992000, 0x0000000055992000, 24, 28, 3c
[ 321.594965] warp_woif_bus_init_hw(): bus:000000003fa799db, rxring: 50, pa: 0x00000000555ca000, 0x00000000555ca000, 54, 58, 6c
[ 321.606303] get_region_info(): wed_idx = 0, base_addr = 0x0000000017429a05, size = 0x40000, res.start = 0x47d80000, shared:0
[ 321.617526] get_region_info(): wed_idx = 0, base_addr = 0x0000000034e0b648, size = 0x8000, res.start = 0x151e0000, shared:0
[ 321.628716] get_region_info(): wed_idx = 0, base_addr = 0x00000000bef7cd22, size = 0x240000, res.start = 0x47dc0000, shared:1
[ 321.640058] get_region_info(): wed_idx = 0, base_addr = 0x000000003b193e69, size = 0x1000, res.start = 0x15194000, shared:0
[ 321.651191] warp_fwdl_mcu_mode(): mcu mode, need fwdl
[ 321.658873] ########## WO Firmware ##########
[ 321.663256] Chip ID: 0x0000
[ 321.666037] ECO version:0
[ 321.668646] Version: DEV_000000
[ 321.671774] Build date: 20220901175230
[ 321.675530] Total region:3
[ 321.678225] #################################
[ 321.682580] Parsing tailer region 0
[ 321.686056] Target address: 0x151e0000
[ 321.689877] Download size: 20768
[ 321.693217] Parsing tailer region 1
[ 321.696693] Target address: 0x47d80000
[ 321.700514] Download size: 86224
[ 321.703902] Parsing tailer region 2
[ 321.707378] Target address: 0x47dc0000
[ 321.711200] Download size: 2319824
[ 321.715132] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu
[ 321.733378] warp_fwdl_ready_check_mcu_mode(): wocpu is ready
[ 321.739056] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE
[ 321.744987] wo_proc_init done 00000000c53778f6
[ 321.749507] wo_exep_proc_init done 00000000c53778f6
[ 321.754507] wo_exception_init(0): exp log= 0x00000000bbce1c61, phy_addr= 0x0000000054578000 size= 32768
[ 321.877857] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS0 PhyMode=78
[ 321.884472] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS1 PhyMode=78
[ 321.891073] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS2 PhyMode=78
[ 321.897687] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS3 PhyMode=78
[ 321.904295] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS4 PhyMode=78
[ 321.910896] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS5 PhyMode=177
[ 321.917597] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS6 PhyMode=177
[ 321.924298] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS7 PhyMode=177
[ 321.930986] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS8 PhyMode=177
[ 321.937690] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS9 PhyMode=177
[ 322.026355] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=0, Desired MFPC=0
[ 322.033753] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=1, Desired MFPC=0
[ 322.041134] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=2, Desired MFPC=0
[ 322.048524] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=3, Desired MFPC=0
[ 322.055913] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=4, Desired MFPC=0
[ 322.063303] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=5, Desired MFPC=0
[ 322.070696] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=6, Desired MFPC=0
[ 322.078091] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=7, Desired MFPC=0
[ 322.085478] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=8, Desired MFPC=0
[ 322.092873] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=9, Desired MFPC=0
[ 322.103235] 7981@C12L1,RTMPSetProfileParameters() 8685: ra0, QoSMgmtCapa=0
[ 322.110096] 7981@C12L1,RTMPSetProfileParameters() 8685: ra1, QoSMgmtCapa=0
[ 322.116967] 7981@C12L1,RTMPSetProfileParameters() 8685: ra2, QoSMgmtCapa=0
[ 322.123834] 7981@C12L1,RTMPSetProfileParameters() 8685: ra3, QoSMgmtCapa=0
[ 322.130702] 7981@C12L1,RTMPSetProfileParameters() 8685: ra4, QoSMgmtCapa=0
[ 322.137576] 7981@C12L1,RTMPSetProfileParameters() 8685: rax0, QoSMgmtCapa=0
[ 322.144530] 7981@C12L1,RTMPSetProfileParameters() 8685: rax1, QoSMgmtCapa=0
[ 322.151477] 7981@C12L1,RTMPSetProfileParameters() 8685: rax2, QoSMgmtCapa=0
[ 322.158436] 7981@C12L1,RTMPSetProfileParameters() 8685: rax3, QoSMgmtCapa=0
[ 322.165389] 7981@C12L1,RTMPSetProfileParameters() 8685: rax4, QoSMgmtCapa=0
[ 322.182138] 7981@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[0] ApCliMuMimoDlEnable = 0
[ 322.190662] 7981@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[1] ApCliMuMimoDlEnable = 0
[ 322.199420] 7981@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[0] ApCliMuMimoUlEnable = 0
[ 322.207936] 7981@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[1] ApCliMuMimoUlEnable = 0
[ 322.323085] BandIdx = 0, tpcDutyInitFlag=1
[ 322.327171] BandIdx = 1, tpcDutyInitFlag=1
[ 322.331514] BandIdx = 0, tpcnitFlag=1
[ 322.335172] BandIdx = 1, tpcnitFlag=1
[ 322.339090] BandIdx = 0, tpcDuty=100-75-50-25
[ 322.343446] BandIdx = 1, tpcDuty=100-75-50-25
[ 322.348053] BandIdx = 0, thermalHighEn=1
[ 322.351962] BandIdx = 1, thermalHighEn=1
[ 322.356143] BandIdx = 0, thermalHighCritera=125
[ 322.360658] BandIdx = 1, thermalHighCritera=125
[ 322.365448] BandIdx = 0, thermalLowEn=1
[ 322.369270] BandIdx = 1, thermalLowEn=1
[ 322.373369] BandIdx = 0, thermalLowCritera=118
[ 322.377799] BandIdx = 1, thermalLowCritera=118
[ 322.382494] BandIdx = 0, thermalRecheckTime=5
[ 322.386850] BandIdx = 1, thermalRecheckTime=5
[ 322.391459] BandIdx = 0, thermalRFOffEn=0
[ 322.395466] BandIdx = 1, thermalRFOffEn=0
[ 322.399728] BandIdx = 0, thermalRFOffCriteria=125
[ 322.404429] BandIdx = 1, thermalRFOffCriteria=125
[ 322.409386] BandIdx = 0, thermalUcType=1
[ 322.413316] BandIdx = 1, thermalUcType=1
[ 322.420416] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 322.432240] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 322.447760] warp_tx_ring_init_hw(): configure ring 0 setting
[ 322.453461] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24420=522e8000,24424=2048,24428=0
[ 322.463735] warp_tx_ring_init_hw(): configure ring 1 setting
[ 322.469386] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24430=55ae0000,24434=2048,24438=0
[ 322.479780] set_rrocfg,0
[ 322.505246] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 3
[ 322.510906] using E1 ROM patch
[ 322.514317] using E1 RAM
[ 322.517107] current sync CR = 0x1
[ 322.520523] Built date: 20230602235633a
[ 322.524507] Platform: ALPS
[ 322.527294] HW/SW version: 0x8a108a10
[ 322.531036] Patch version: 0xffffffff
[ 322.535262] current sync CR = 0x1
[ 322.543534] Chip ID: 0x14
[ 322.546245] Eco version: 0x00
[ 322.549291] Region number: 0x0b
[ 322.552532] Format version: 0x02
[ 322.555890] Format flag: 0x01
[ 322.558935] Ram version: ____000000
[ 322.562503] Built date: 20230602235650
[ 322.566382] Common crc: 0x9212bfc6
[ 322.569873] Release info: header tag = 0, total length = 0
[ 322.599938] Chip ID: 0x00
[ 322.602745] Eco version: 0x00
[ 322.605855] Region number: 0x03
[ 322.609124] Format version: 0x02
[ 322.612451] Format flag: 0x01
[ 322.615531] Ram version: DEV_000000
[ 322.619156] Built date: 20220901175135
[ 322.623011] Common crc: 0xdc1c7789
[ 322.626501] Release info: header tag = 0, total length = 0
[ 322.715760] current sync CR = 0x7
[ 322.719656] efuse_probe: efuse = deaddead
[ 322.723702] rtmp_ee_load_from_bin::bin FileName = /tp_data/MT7981_EEPROM.bin, bin bak = /user_data1/MT7981_EEPROM.bin, use caled e2p file
[ 322.737524] Load EEPROM Buffer from /tp_data/MT7981_EEPROM.bin
[ 322.743398] rtmp_btn_load_from_bin::bin FileName = /tp_data/MT7981_BTNFLAG.bin, bin bak = /user_data1/MT7981_BTNFLAG.bin
[ 322.757396] 7981@C02L1,is_cal_free_ic() 831: [a-die version:1]
saveconfig() begin
saveconfig() end
[ 325.183402] 7981@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now!
[ 325.190894] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000c321594a,Band=0,rfcap=1,channel=1,PhyMode=64 extCha=0xf
[ 325.201638] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000e9a89dc4,Band=1,rfcap=2,channel=36,PhyMode=128 extCha=0xf
[ 325.212630] 7981@C01L1,AntCfgInit() 3179: Not support for HIF_MT yet!
[ 325.234003] ch_switch_monitor_state_machine_init:: enter
[ 325.239314] ch_switch_monitor_cfg_reset:: enter
[ 325.243892] ch_switch_monitor_cfg_reset:: enter
[ 325.252893] 7981@C17L1,tx_pwr_comp_init() 641: NotSupportYet!
[ 325.258736] 7981@C12L1,SCS_init() 880: INIT SCSEnable [0]= 1
[ 325.264524] 7981@C12L1,SCS_init() 887: INIT SCSEnable [1]= 0
[ 325.270512] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 325.276331] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 325.281830] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited!
[ 325.308999] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 3
[ 325.315573] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 325.321135] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 325.326784] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 325.336715] 7981@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(0) cck_timeout Fail!
[ 325.345443] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 325.355372] 7981@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(0) ofdm_timeout Fail!
[ 325.364185] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 325.374105] 7981@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(0) ofdma_timeout Fail!
[ 325.382992] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 325.392906] 7981@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(1) cck_timeout Fail!
[ 325.401594] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 325.411535] 7981@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(1) ofdm_timeout Fail!
[ 325.420328] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 325.430253] 7981@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(1) ofdma_timeout Fail!
[ 325.439416] mt_wifi_init: Band = 0, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 325.447867] mt_wifi_init: Band = 0, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 325.462008] mt_wifi_init: Band = 1, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 325.470493] mt_wifi_init: Band = 1, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 325.489792] :(op = 1)
[ 325.497005] 7981@C00L1,FastPathCheckMIC() 1010: (ret = 0)(op:1)
[ 325.503240] 7981@C00L1,MtCmdCr4RedSet() 914: MtCmdCr4RedSet: (ret = 0)
[ 325.510013] 7981@C00L1,SendRedCmd() 1049: SendRedCmd:(ret = 1)
[ 325.516449] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.522829] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.529265] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.535660] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.542097] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.548485] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.554938] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.561283] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.567753] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.574118] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.580563] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.586947] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.593396] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.599739] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.606211] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.612574] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.619011] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.625389] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.631824] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.638203] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.644663] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.651008] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.657473] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.663836] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.670270] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 325.676650] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 325.683104] 7981@C23L1,DfsBuildChannelList() 3890: [RDM]: wdev is not 5G.
[ 325.689917] phy_freq_adjust : no prim_ch value for adjust!
[ 325.695437] 7981@C23L1,operate_loader_phy() 398: phy_freq_adjust failed!WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 325.711946] 7981@C23L1,HcGetBandByChannel() 1235: No hdev parking on channel:0, just return a default band_idx 0!
[ 325.722908] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 325.730126] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 325.736726] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[0] = 1
[ 325.743943] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 325.749493] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 325.755021] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 78, ACSChStat:0
[ 325.762413] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x10c/0x4b8 [mt_wifi])!!
[ 325.774931] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 326.213049] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 326.593185] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 326.973183] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 327.352994] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 327.733014] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 327.783449] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APUpdateOperationMode+0x114/0x278 [mt_wifi])!!
[ 328.112999] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 328.502976] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 328.893654] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 329.283347] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x258/0x4b8 [mt_wifi])!!
[ 329.295884] 7981@C23L0,SelectClearChannelBusyTime() 1890: [SelectClearChannelBusyTime] - band0 START
[ 329.305083] 7981@C23L0,SelectClearChannelBusyTime() 1891: [SelectClearChannelBusyTime] - cfg_ht_bw = 1 vht_bw = 0
[ 329.315345] 7981@C23L0,SelectClearChannelBusyTime() 1898: ====================================================================
[ 329.326725] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 2 : Busy Time = 3337, Skip Channel = FALSE, BwCap = TRUE
[ 329.338109] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 3 : Busy Time = 537, Skip Channel = FALSE, BwCap = TRUE
[ 329.349551] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 4 : Busy Time = 1784, Skip Channel = FALSE, BwCap = TRUE
[ 329.360967] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 5 : Busy Time = 7763, Skip Channel = FALSE, BwCap = TRUE
[ 329.372355] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 6 : Busy Time = 9797, Skip Channel = FALSE, BwCap = TRUE
[ 329.383736] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 7 : Busy Time = 6828, Skip Channel = FALSE, BwCap = TRUE
[ 329.395118] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 8 : Busy Time = 1623, Skip Channel = FALSE, BwCap = TRUE
[ 329.406498] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 9 : Busy Time = 1039, Skip Channel = FALSE, BwCap = TRUE
[ 329.417877] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 10 : Busy Time = 7023, Skip Channel = FALSE, BwCap = TRUE
[ 329.429257] 7981@C23L0,SelectClearChannelBusyTime() 1907: ====================================================================
[ 329.440644] 7981@C23L0,SelectClearChannelBusyTime() 2179: Rule 3 Channel Busy time value : Select Primary Channel 3
[ 329.451070] 7981@C23L0,SelectClearChannelBusyTime() 2181: Rule 3 Channel Busy time value : Min Channel Busy = 537
[ 329.461334] 7981@C23L0,SelectClearChannelBusyTime() 2186: Rule 3 Channel Busy time value : BW = 20
[ 329.470287] 7981@C23L0,SelectClearChannelBusyTime() 2225: [SelectClearChannelBusyTime] - band0 END
[ 329.479241] 7981@C00L0,ApAutoChannelAtBootUp() 407: Auto channel selection: Selected channel = 3, IsAband = 0
[ 329.489508] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 329.633072] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 329.644159] 7981@C23L1,DfsBuildChannelList() 3890: [RDM]: wdev is not 5G.
[ 329.650957] 7981@C00L0,ApAutoChannelAtBootUp() 599: <-----------------
[ 329.657730] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 329.663294] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 329.836980] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 330.152756] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 330.158321] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 330.326383] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 330.642747] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 330.648267] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 330.816483] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 331.133402] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!!
[ 331.147621] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 331.153179] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 331.320851] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 331.642792] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 331.648408] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 331.816796] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 332.132762] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 332.138284] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 332.307556] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 332.632775] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 332.638307] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 332.807527] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 333.132767] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 333.138294] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 333.308188] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 333.632789] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 333.638320] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 333.809078] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 334.132773] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 334.138297] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 334.307379] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 334.632769] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 334.638292] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 334.807609] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 335.132706] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 335.275910] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 335.287091] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 335.429352] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 335.519837] 7981@C00L1,TxCCKStreamCtrl() 21830: set wrong parameters
[ 335.537526] PrintSrCmd:
[ 335.537526] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 335.537526] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 335.551573] PrintSrCmd:
[ 335.551573] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 335.551573] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 335.566138] PrintSrCmd:
[ 335.566138] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 335.566138] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 335.580324] PrintSrCmd:
[ 335.580324] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 335.580324] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 335.594481] PrintSrCmd:
[ 335.594481] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 335.594481] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 335.608643] PrintSrCmd:
[ 335.608643] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 335.608643] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 335.622797] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 335.633899] extif_set_dev(ra0)
[ 335.636992] [mtf_txpower_all_rate_info] band_idx:0 pwr:32 ChBand:2G ePAGain:0
[ 335.644164] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
[ 335.651411] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 335.657735] br-lan: port 4(ra0) entered blocking state
[ 335.662883] br-lan: port 4(ra0) entered forwarding state
=====>>>>>set tp_ie for vap ra0
iwpriv ra0 set tp_ie=dd1e001d0f1001600000088AF16D7FCE088AF16D7FCE45d600007FCE00010000
iwpriv ra0 set mapEnable=3
[ 335.751715] Set_Map_Proc current MAP MODE is 3
iwpriv ra0 set mapR2Enable=1
[ 335.765777] Set_MapR2_Proc MAP R2 is already enabled
iwpriv ra0 set SSID=0xDEADBEEF
[ 335.944832] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 335.956133] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 336.045508] Set_HighPriMcs(): input param error
[ 336.045508] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 336.045508] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 336.045508] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 336.045508] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set HideSSID=0
mumimo_config ra0 1
iwpriv ra0 set MuMimo=1
iwpriv ra0 set BeaconPeriod=100
[ 336.083178] sync for : ra0
iwpriv ra0 set RTSThreshold=2346[ 336.090469] Set_RTSThreshold_Proc: set wdev0 rts length threshold=2346(0x92a)
iwpriv ra0 set FragThreshold=234[ 336.103398] Set_FragThreshold_Proc::set wdev0 FragThreshold=2346)
6
iwpriv ra0 set DtimPeriod=1
iwpriv ra0 set WmmCapable=1
iwpriv ra0 set NoForwarding=0
iwpriv ra0 set NoForwardingBTNBSSID=0
iwpriv ra0 set UAPSDCapable=1
killall -q -SIGINT rt2860apd
iwpriv ra0 set AuthMode=WPA2PSK
iwpriv ra0 set EncrypType=AES
iwpriv ra0 set IEEE8021X=0
iwpriv ra0 set RekeyInterval=0
iwpriv ra0 set WPAPSK=F4k3nsz1t.8
iwpriv ra0 set WscConfMode=7
iwpriv ra0 set WscConfStatus=2
iwpriv ra0 set WscVendorPinCode[ 336.537445] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
=93350273
iwpriv ra0 set WscLabelDisabled=0
iwpriv ra0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv ra0 set AccessPolicy=0
iwpriv ra0 set HideSSID=0
iwpriv ra0 set SSID=0xDEADBEEF
[ 336.566460] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 336.657736] Set_HighPriMcs(): input param error
[ 336.657736] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 336.657736] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 336.657736] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 336.657736] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set hw_nat_register=1[ 336.689620] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
brctl addif br-lan ra0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra1
[ 337.674520] ath_band_steering_netlink_receive 161 pid = 17541
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra1
ifconfig ra1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra3
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra3
ifconfig ra3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apcli0
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan apcli0
[ 339.098216] device apcli0 left promiscuous mode
[ 339.103526] br-lan: port 5(apcli0) entered disabled state
ifconfig apcli0 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl[ 339.246250] br-lan: port 5(apcli0) entered blocking state
setifvlan br-la[ 339.252400] br-lan: port 5(apcli0) entered disabled state
n ra1 4 1
can't[ 339.259555] device apcli0 entered promiscuous mode
set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra2
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig ra2 up
[ 339.742273] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[2]=9, bw_grp=16 omac=17
[ 339.752947] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 339.760115] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 339.766722] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[0] = 1
[ 339.773905] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 339.779406] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 339.784854] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 78, ACSChStat:1
[ 339.791889] 7981@C00L1,ApAutoChannelAtBootUp() 513: not A band
[ 339.797724] 7981@C08L1,ap_run_at_boot() 639:  ACS is disable !!
[ 339.804719] 7981@C12L1,SetWPAPSKKey() 1643: WPAPSK Key length(0) error, required 8 ~ 64 characters!(keyStr=)
[ 339.824791] 7981@C00L1,TxCCKStreamCtrl() 21830: set wrong parameters
[ 339.842221] PrintSrCmd:
[ 339.842221] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 339.842221] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 339.856235] PrintSrCmd:
[ 339.856235] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 339.856235] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 339.870229] PrintSrCmd:
[ 339.870229] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 339.870229] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 339.884235] PrintSrCmd:
[ 339.884235] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 339.884235] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 339.898319] PrintSrCmd:
[ 339.898319] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 339.898319] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 339.912413] PrintSrCmd:
[ 339.912413] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 339.912413] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 339.926533] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 339.937542] extif_set_dev(ra2)
[ 339.938357] [mtf_txpower_all_rate_info] band_idx:0 pwr:32 ChBand:2G ePAGain:0
[ 339.940588] mtk_ppe_dev_register_hook : ineterface ra2 register (2)
[ 339.954207] br-lan: port 7(ra2) entered blocking state
[ 339.959344] br-lan: port 7(ra2) entered forwarding state
=====>>>>>set tp_ie for vap ra2
iwpriv ra2 set tp_ie=dd1e001d0f[ 339.971150] Set_Map_Proc current MAP MODE is 3
1001640000088AF16D7FCE088AF16D7F[ 339.979215] Set_MapR2_Proc MAP R2 is already enabled
CE45d600007FCE00010000
iwpriv ra2 set mapEnable=3
iwpriv ra2 set mapR2Enable=1
iwpriv ra2 set SSID=QvtNGxlLupdo[ 340.050383] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
tioxeBqNHYzEmUi4tk
[ 340.062087] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[2]=9, bw_grp=16 omac=17
[ 340.072463] 7981@C12L1,SetWPAPSKKey() 1643: WPAPSK Key length(0) error, required 8 ~ 64 characters!(keyStr=)
[ 340.093370] Set_HighPriMcs(): input param error
[ 340.093370] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 340.093370] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 340.093370] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 340.093370] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra2 set HideSSID=1
mumimo_config ra2 1
iwpriv ra2 set MuMimo=1
iwpriv ra2 set BeaconPeriod=100
[ 340.131330] sync for : ra0
[ 340.135357] sync for : ra2
iwpriv ra2 set RTSThreshold=2346[ 340.140974] Set_RTSThreshold_Proc: set wdev2 rts length threshold=2346(0x92a)
iwpriv ra2 set FragThreshold=234[ 340.151363] Set_FragThreshold_Proc::set wdev2 FragThreshold=2346)
6
iwpriv ra2 set DtimPeriod=1
iwpriv ra2 set WmmCapable=1
iwpriv ra2 set NoForwarding=0
iwpriv ra2 set NoForwardingBTNBSSID=0
iwpriv ra2 set UAPSDCapable=1
iwpriv ra2 set AuthMode=WPA2PSK
iwpriv ra2 set EncrypType=AES
iwpriv ra2 set IEEE8021X=0
iwpriv ra2 set RekeyInterval=0
iwpriv ra2 set WPAPSK=8VwEYmXBF2PYWzwNce1lJfXdTmzEXw
iwpriv ra2 set WscConfMode=0
[ 340.311656] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
iwpriv ra2 set WscConfStatus=2
iwpriv ra2 set WscLabelDisabled=0
iwpriv ra2 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv ra2 set AccessPolicy=0
iwp[ 340.335887] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
riv ra2 set HideSSID=1
iwpriv ra2 set SSID=QvtNGxlLupdotioxeBqN[ 340.348279] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[2]=9, bw_grp=16 omac=17
HYzEmUi4tk
[ 340.439313] Set_HighPriMcs(): input param error
[ 340.439313] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 340.439313] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 340.439313] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 340.439313] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra2 set hw_nat_register=1[ 340.469846] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
[ 340.478952] mtk_ppe_dev_register_hook : ra2 has been registered in wifi_hook_if table[2]
brctl addif br-lan ra2
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra4
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra4
ifconfig ra4 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_start_interface wifi1
wifi_vap_local rax0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig rax0 up
[ 341.677715] phy_freq_adjust : no prim_ch value for adjust!
[ 341.683224] 7981@C23L1,operate_loader_phy() 398: phy_freq_adjust failed!WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
[ 341.698812] 7981@C23L1,HcGetBandByChannel() 1235: No hdev parking on channel:0, just return a default band_idx 0!
[ 341.710061] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 341.717295] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 341.723848] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[1] = 1
[ 341.731021] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 341.736555] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 341.741946] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 177, ACSChStat:0
[ 341.749360] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x10c/0x4b8 [mt_wifi])!!
[ 341.761731] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 342.222918] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!!
[ 342.472899] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
saveconfig() begin
[ 342.992911] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
saveconfig() end
socket non-blocking already set. flags=2050socket non-blocking already set. flags=2050Controller>>[ieee1905_signal_hdlr,57] sig[15]
Controller>>[ieee1905_exit,45] CLOSING IEEE1905
Shutting down 1905
Controller>>[map_ieee1905_device_deinit,118] Received callback: Device[08:8A:F1:6D:7F:CE] got removed
[ 343091][meshd_signal_hdlr,82] sig[15]
[ 343091][meshd_exit,74] CLOSING easymesh
[ 343091][meshd_signal_hdlr,82] sig[15]
[ 343091][meshd_exit,74] CLOSING easymesh
[ 343.492885] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 343.992898] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 344.312887] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 344.632886] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 344.952874] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 345.273017] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x258/0x4b8 [mt_wifi])!!
[ 345.285291] 7981@C23L0,SelectClearChannelBusyTime() 1890: [SelectClearChannelBusyTime] - band1 START
[ 345.294432] 7981@C23L0,SelectClearChannelBusyTime() 1891: [SelectClearChannelBusyTime] - cfg_ht_bw = 1 vht_bw = 2
[ 345.304698] 7981@C23L0,SelectClearChannelBusyTime() 1898: ====================================================================
[ 345.316089] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 36 : Busy Time = 3338, Skip Channel = FALSE, BwCap = TRUE
[ 345.327483] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 40 : Busy Time = 668, Skip Channel = FALSE, BwCap = TRUE
[ 345.338874] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 44 : Busy Time = 1200, Skip Channel = FALSE, BwCap = TRUE
[ 345.350257] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 48 : Busy Time = 1785, Skip Channel = FALSE, BwCap = TRUE
[ 345.361640] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 52 : Busy Time = 1288, Skip Channel = FALSE, BwCap = TRUE
[ 345.373026] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 56 : Busy Time = 231, Skip Channel = FALSE, BwCap = TRUE
[ 345.384411] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 60 : Busy Time = 66, Skip Channel = FALSE, BwCap = TRUE
[ 345.395793] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 64 : Busy Time = 169, Skip Channel = FALSE, BwCap = TRUE
[ 345.407178] 7981@C23L0,SelectClearChannelBusyTime() 1907: ====================================================================
[ 345.418564] 7981@C23L0,SelectClearChannelBusyTime() 2174: Select Primary Channel 40 from bw160PreferCh[]!
[ 345.428132] 7981@C23L0,SelectClearChannelBusyTime() 2179: Rule 3 Channel Busy time value : Select Primary Channel 40
[ 345.438650] 7981@C23L0,SelectClearChannelBusyTime() 2181: Rule 3 Channel Busy time value : Min Channel Busy = 3338
[ 345.448991] 7981@C23L0,SelectClearChannelBusyTime() 2186: Rule 3 Channel Busy time value : BW = 160
[ 345.458034] 7981@C23L0,SelectClearChannelBusyTime() 2225: [SelectClearChannelBusyTime] - band1 END
[ 345.466993] 7981@C00L0,ApAutoChannelAtBootUp() 407: Auto channel selection: Selected channel = 40, IsAband = 1
[ 345.477000] 7981@C12L0,Adj_ZeroWait_Status_Update() 1076: Adj_ZeroWait_Status_Update(1076), Channel(40), OutBandCh(0), vht_bw(2), OutBandBw(0), BW160ZeroWaitState(0)
[ 345.491770] 7981@C12L0,Adj_ZeroWait_Status_Update() 1156: Adj_ZeroWait_Status_Update(1156), Channel(40), OutBandCh(0), vht_bw(2), OutBandBw(0), BW160ZeroWaitState(1)
[ 345.506635] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 345.754995] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 345.766032] 7981@C00L0,ApAutoChannelAtBootUp() 599: <-----------------
[ 345.868541] PrintSrCmd:
[ 345.868541] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 345.868541] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 345.882553] PrintSrCmd:
[ 345.882553] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 345.882553] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 345.896555] PrintSrCmd:
[ 345.896555] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 345.896555] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 345.910551] PrintSrCmd:
[ 345.910551] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 345.910551] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 345.924639] PrintSrCmd:
[ 345.924639] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 345.924639] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 345.938726] PrintSrCmd:
[ 345.938726] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 345.938726] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 345.952854] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 345.963863] extif_set_dev(rax0)
[ 345.964669] [mtf_txpower_all_rate_info] band_idx:1 pwr:38 ChBand:5G ePAGain:0
[ 345.966997] mtk_ppe_dev_register_hook : ineterface rax0 register (3)
[ 345.980689] br-lan: port 8(rax0) entered blocking state
[ 345.985935] br-lan: port 8(rax0) entered forwarding state
=====>>>>>set tp_ie for vap rax0[ 345.995748] ath_band_steering_netlink_receive 161 pid = 17541
iwpriv rax0 set tp_ie=dd1e001d[ 346.003790] Set_Map_Proc current MAP MODE is 3
0f1001600000088AF16D7FCE088AF16D[ 346.011121] Set_MapR2_Proc MAP R2 is already enabled
7FCE45d600007FCE00010000
iwpriv rax0 set mapEnable=3
iwpriv rax0 set mapR2Enable=1
iwpriv rax0 set SSID=0xDEADBEEF
[ 346.080978] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 346.092230] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 346.111831] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 346.122948] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set HideSSID=0
mumimo_config rax0 1
iwpriv rax0 set MuMimo=1
iwpriv rax0 set [ 346.218774] sync for : ra0
BeaconPeriod=100[ 346.223072] sync for : ra2
[ 346.227005] sync for : rax0
iwpriv rax0 set RTSThreshold=234[ 346.232749] Set_RTSThreshold_Proc: set wdev5 rts length threshold=2346(0x92a)
6
iwpriv rax0 set FragThreshold=23[ 346.243075] Set_FragThreshold_Proc::set wdev5 FragThreshold=2346)
46
iwpriv rax0 set DtimPeriod=1
iwpriv rax0 set WmmCapable=1
iwpriv rax0 set NoForwarding=0
iwpriv rax0 set NoForwardingBTNBSSID=0
iwpriv rax0 set UAPSDCapable=1
killall -q -SIGINT rt2860apd_x
iwpriv rax0 set AuthMode=WPA2PSK
iwpriv rax0 set EncrypType=AES
iwpriv rax0 set IEEE8021X=0
iwpriv rax0 set RekeyInterval=0
iwpriv rax0 set WPAPSK=F4k3nsz1t.8
iwpriv rax0 set WscConfMode=7
iwpriv rax0 set WscConfStatus=2
iwpriv rax0 [ 346.414265] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
set WscVendorPinCode=93350273
iwpriv rax0 set WscLabelDisabled=0
iwpriv rax0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv rax0 set AccessPolicy=0
i[ 346.438336] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
wpriv rax0 set HideSSID=0
iwpriv rax0 set SSID=[ 346.450453] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
0xDEADBEEF
[ 346.471100] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 346.482319] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set hw_nat_register=[ 346.573438] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
1
[ 346.582251] mtk_ppe_dev_register_hook : ra2 has been registered in wifi_hook_if table[2]
[ 346.590603] mtk_ppe_dev_register_hook : rax0 has been registered in wifi_hook_if table[3]
brctl addif br-lan rax0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax1
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax1
ifconfig rax1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax3
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax3
ifconfig rax3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan [ 348.006395] ath_band_steering_netlink_receive 161 pid = 17541
rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apclix0
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan apclix0
[ 348.414297] device apclix0 left promiscuous mode
[ 348.419519] br-lan: port 6(apclix0) entered disabled state
ifconfig apclix0 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif b[ 348.598774] br-lan: port 6(apclix0) entered blocking state
r-lan ra4
can't[ 348.605714] br-lan: port 6(apclix0) entered disabled state
add ra4 to brid[ 348.612800] device apclix0 entered promiscuous mode
ge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax2
gp_id_rand = 45d6
random_suffix = 45d6
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax4
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax4
ifconfig rax4 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
nrd: stopping
nrd: 17541
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
wifi_onemesh
wifi_reload_local
nrd: starting daemon, AP steering is off, Band steering is on
[ 350.033653] ath_band_steering_netlink_receive 161 pid = 7526
[ 350.040059] ath_band_steering_netlink_receive 161 pid = 7526
[ 350.052734] ath_band_steering_netlink_receive 161 pid = 7526
wifi_led_set 2g = ON, 5g = ON
========= don't cli WIFI-led when not cal
wifi_shutdown_interface wifi0
ifconfig ra0 down
[ 350.364308] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 350.378977] extif_put_dev(ra0)
[ 350.382039] mtk_ppe_dev_unregister_hook : ineterface ra0 set null (1)
[ 350.390682] br-lan: port 4(ra0) entered disabled state
ifconfig ra1 down
ifconfig ra3 down
ifconfig apcli0 down
ifconfig ra2 down
[ 350.411162] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(2) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 350.426941] extif_put_dev(ra2)
[ 350.429991] mtk_ppe_dev_unregister_hook : ineterface ra2 set null (2)
[ 350.438685] br-lan: port 7(ra2) entered disabled state
ifconfig ra4 down
wifi_config_profile wifi0
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SSID1=0xDEADBEEF>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra3 skipped
=====>>>>> wifi0: vif apcli0 skipped
config_profile_set, SSID3=QvtNGxlLupdotioxeBqNHYzEmUi4tk>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra4 skipped
config_profile_set, WirelessMode=16>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_BW=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BSSCoexistence=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, Channel=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AutoChannelSelect=3>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaDlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaUlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TWTSupport=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
wifi_shutdown_interface wifi1
ifconfig rax0 down
[ 352.641958] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 352.657409] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 352.669322] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(1) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 352.680989] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(2) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 352.692689] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(3) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 352.704359] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(4) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 352.716018] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 352.727766] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(6) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 352.739507] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(7) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 352.751191] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(8) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 352.762917] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(9) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 352.776032] ch_switch_monitor_exit:: Exit
[ 352.785076] current sync CR = 0x7
[ 352.788429] current sync CR = 0x7
[ 352.792735] current sync CR = 0x7
[ 352.797038] current sync CR = 0x7
[ 352.801341] current sync CR = 0x1
[ 352.905197] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 0
[ 352.910854] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 0
[ 352.916605] warp_woctrl_send_msg_and_wait_cr(), idx:0, state:DISABLE
[ 352.922962] warp_woctrl_send_msg_and_wait_cr(): wait for wocpu
[ 352.928779] [tmp]warp_woctrl_send_msg_and_wait_cr(): wait for wocpu, value:1, value_done:1
[ 352.937042] warp_woctrl_send_msg_and_wait_cr(): wocpu is ready, done_value:1
[ 352.944080] warp_woctrl_kickout(), idx: 0, state:HALT
[ 352.949116] warp_woctrl_kickout(): wait for wocpu
[ 352.953814] [tmp]warp_woctrl_kickout(): wait for wocpu, value:7, value_done:7
[ 352.960935] warp_woctrl_kickout(): wocpu is ready, done_value:7
[ 352.988380] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 352.998174] [Nop_List_Backup] NopList Channel count:0 <----
[ 353.092555] wed_ser_task(): wed_ser exist, wed->irq=7!
[ 353.103315] wo_exception_exit(0): wo_exception_exit done
[ 353.108636] warp_msg_receive(),go,warp,2353,0
[ 353.113003] warp_msg_process(): module id(0), wed_idx(0), something wrong(ret = -1)
[ 353.120691] warp_msg_unregister():done
[ 353.124653] warp_client_remove(): warp entry clear done!!
[ 353.130051] extif_put_dev(rax0)
[ 353.133277] mtk_ppe_dev_unregister_hook : ineterface rax0 set null (3)
[ 353.142102] br-lan: port 8(rax0) entered disabled state
[ 353.150246] 7981@C12L1,rt28xx_ap_ioctl() 853: interface is down, cmd [8be1] return!!!
ifconfig rax1 down
ifconfig rax3 down
ifconfig apclix0 down
ifconfig rax2 down
ifconfig rax4 down
wifi_config_profile wifi1
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID1=0xDEADBEEF>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE_5G>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax3 skipped
=====>>>>> wifi1: vif apclix0 skipped
config_profile_set, SSID3=9gWuE7wE7zJzMcyCn9jK61EorBeHe2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax4 skipped
config_profile_set, WirelessMode=17>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_BW=2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, Channel=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSelect=3>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSkipList=100;104;108;112;116;120;124;128;132;136;140>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, IEEE80211H=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWait=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsDedicatedZeroWait=3>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWaitDefault=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaDlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaUlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TWTSupport=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
Node 0, zone DMA32 716 557 374 199 118 107 50 18 10 6 66
wifi_start_interface wifi0
wifi_vap_local ra0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig ra0 up
[ 356.221951] client_get_axi_slot_id(): wrong BUS_TYPE
[ 356.227005] warp_cap_support(): chip_id=7981 is in WHNAT support list
[ 356.233458] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entry: 000000001ad8d815
[ 356.242140] client_hif_specific_get(): hw->base_phy_addr 0x18000000!!
[ 356.248581] client_chip_specific_get(): 0x7981 chip id 0x7981!!
[ 356.254601] warp_entry_get_by_pdev(): return entry[0]
[ 356.261467] warp_msg_register():warp,pid,10022,id,0,wed_idx,0
[ 356.267223] warp_dev2 15010000.wed: Using 32bit DMA for streaming map
[ 356.273669] warp_dev2 15010000.wed: Using 32bit DMA for coherent map
[ 356.280044] wed_init(0): res_start = 0x15010000, size = 1000, irq=7,base_addr=0xffffffc010ead000
[ 356.289300] wed_ring_init(): wed tx ring init result = 0
[ 356.295139] wed_ring_init(): wed rx ring init result = 0
[ 356.310034] create wed ok!!!
[ 356.312960] wdma_init(): wdma(0) base_addr=0xffffffc010eaf800, base_phy_addr=0x15104800
[ 356.321709] warp_woif_bus_init_hw(): bus:000000003fa799db, txring: 20, pa: 0x0000000055b08000, 0x0000000055b08000, 24, 28, 3c
[ 356.333114] warp_woif_bus_init_hw(): bus:000000003fa799db, rxring: 50, pa: 0x000000005505a000, 0x000000005505a000, 54, 58, 6c
[ 356.344460] get_region_info(): wed_idx = 0, base_addr = 0x000000007c4ee8d3, size = 0x40000, res.start = 0x47d80000, shared:0
[ 356.355685] get_region_info(): wed_idx = 0, base_addr = 0x000000007a39489b, size = 0x8000, res.start = 0x151e0000, shared:0
[ 356.366847] get_region_info(): wed_idx = 0, base_addr = 0x000000003f84817f, size = 0x240000, res.start = 0x47dc0000, shared:1
[ 356.378153] get_region_info(): wed_idx = 0, base_addr = 0x000000007db48b18, size = 0x1000, res.start = 0x15194000, shared:0
[ 356.389269] warp_fwdl_mcu_mode(): mcu mode, need fwdl
[ 356.396945] ########## WO Firmware ##########
[ 356.401300] Chip ID: 0x0000
[ 356.404160] ECO version:0
[ 356.406770] Version: DEV_000000
[ 356.409899] Build date: 20220901175230
[ 356.413652] Total region:3
[ 356.416348] #################################
[ 356.420690] Parsing tailer region 0
[ 356.424176] Target address: 0x151e0000
[ 356.428000] Download size: 20768
[ 356.431337] Parsing tailer region 1
[ 356.434827] Target address: 0x47d80000
[ 356.438650] Download size: 86224
[ 356.442021] Parsing tailer region 2
[ 356.445515] Target address: 0x47dc0000
[ 356.449338] Download size: 2319824
[ 356.453415] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu
[ 356.471525] warp_fwdl_ready_check_mcu_mode(): wocpu is ready
[ 356.477208] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE
[ 356.483142] wo_proc_init done 00000000cd23b700
[ 356.487664] wo_exep_proc_init done 00000000cd23b700
[ 356.492661] wo_exception_init(0): exp log= 0x00000000311f86e8, phy_addr= 0x0000000052088000 size= 32768
[ 356.616061] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS0 PhyMode=78
[ 356.622675] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS1 PhyMode=78
[ 356.629275] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS2 PhyMode=78
[ 356.635887] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS3 PhyMode=78
[ 356.642488] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS4 PhyMode=78
[ 356.649101] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS5 PhyMode=177
[ 356.655803] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS6 PhyMode=177
[ 356.662491] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS7 PhyMode=177
[ 356.669187] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS8 PhyMode=177
[ 356.675887] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS9 PhyMode=177
[ 356.764645] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=0, Desired MFPC=0
[ 356.772033] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=1, Desired MFPC=0
[ 356.779427] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=2, Desired MFPC=0
[ 356.786818] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=3, Desired MFPC=0
[ 356.794214] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=4, Desired MFPC=0
[ 356.801597] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=5, Desired MFPC=0
[ 356.808988] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=6, Desired MFPC=0
[ 356.816380] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=7, Desired MFPC=0
[ 356.823776] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=8, Desired MFPC=0
[ 356.831158] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=9, Desired MFPC=0
[ 356.841517] 7981@C12L1,RTMPSetProfileParameters() 8685: ra0, QoSMgmtCapa=0
[ 356.848385] 7981@C12L1,RTMPSetProfileParameters() 8685: ra1, QoSMgmtCapa=0
[ 356.855258] 7981@C12L1,RTMPSetProfileParameters() 8685: ra2, QoSMgmtCapa=0
[ 356.862119] 7981@C12L1,RTMPSetProfileParameters() 8685: ra3, QoSMgmtCapa=0
[ 356.868993] 7981@C12L1,RTMPSetProfileParameters() 8685: ra4, QoSMgmtCapa=0
[ 356.875861] 7981@C12L1,RTMPSetProfileParameters() 8685: rax0, QoSMgmtCapa=0
[ 356.882817] 7981@C12L1,RTMPSetProfileParameters() 8685: rax1, QoSMgmtCapa=0
[ 356.889766] 7981@C12L1,RTMPSetProfileParameters() 8685: rax2, QoSMgmtCapa=0
[ 356.896727] 7981@C12L1,RTMPSetProfileParameters() 8685: rax3, QoSMgmtCapa=0
[ 356.903682] 7981@C12L1,RTMPSetProfileParameters() 8685: rax4, QoSMgmtCapa=0
[ 356.920430] 7981@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[0] ApCliMuMimoDlEnable = 0
[ 356.928954] 7981@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[1] ApCliMuMimoDlEnable = 0
[ 356.937713] 7981@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[0] ApCliMuMimoUlEnable = 0
[ 356.946241] 7981@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[1] ApCliMuMimoUlEnable = 0
[ 357.061394] BandIdx = 0, tpcDutyInitFlag=1
[ 357.065488] BandIdx = 1, tpcDutyInitFlag=1
[ 357.069840] BandIdx = 0, tpcnitFlag=1
[ 357.073505] BandIdx = 1, tpcnitFlag=1
[ 357.077423] BandIdx = 0, tpcDuty=100-75-50-25
[ 357.081768] BandIdx = 1, tpcDuty=100-75-50-25
[ 357.086385] BandIdx = 0, thermalHighEn=1
[ 357.090294] BandIdx = 1, thermalHighEn=1
[ 357.094481] BandIdx = 0, thermalHighCritera=125
[ 357.098997] BandIdx = 1, thermalHighCritera=125
[ 357.103794] BandIdx = 0, thermalLowEn=1
[ 357.107618] BandIdx = 1, thermalLowEn=1
[ 357.111706] BandIdx = 0, thermalLowCritera=118
[ 357.116166] BandIdx = 1, thermalLowCritera=118
[ 357.120867] BandIdx = 0, thermalRecheckTime=5
[ 357.125232] BandIdx = 1, thermalRecheckTime=5
[ 357.129843] BandIdx = 0, thermalRFOffEn=0
[ 357.133854] BandIdx = 1, thermalRFOffEn=0
[ 357.138117] BandIdx = 0, thermalRFOffCriteria=125
[ 357.142819] BandIdx = 1, thermalRFOffCriteria=125
[ 357.147776] BandIdx = 0, thermalUcType=1
[ 357.151684] BandIdx = 1, thermalUcType=1
[ 357.158795] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 357.170607] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 357.185632] warp_tx_ring_init_hw(): configure ring 0 setting
[ 357.191291] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24420=51a48000,24424=2048,24428=0
[ 357.201572] warp_tx_ring_init_hw(): configure ring 1 setting
[ 357.207227] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24430=555d8000,24434=2048,24438=0
[ 357.217603] set_rrocfg,0
[ 357.243014] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 3
[ 357.248670] using E1 ROM patch
[ 357.251714] using E1 RAM
[ 357.254293] current sync CR = 0x1
[ 357.257860] Built date: 20230602235633a
[ 357.261788] Platform: ALPS
[ 357.264629] HW/SW version: 0x8a108a10
[ 357.268374] Patch version: 0xffffffff
[ 357.272225] current sync CR = 0x1
[ 357.279783] Chip ID: 0x14
[ 357.282489] Eco version: 0x00
[ 357.285556] Region number: 0x0b
[ 357.288774] Format version: 0x02
[ 357.292076] Format flag: 0x01
[ 357.295141] Ram version: ____000000
[ 357.298709] Built date: 20230602235650
[ 357.302549] Common crc: 0x9212bfc6
[ 357.306028] Release info: header tag = 0, total length = 0
[ 357.334349] Chip ID: 0x00
[ 357.337059] Eco version: 0x00
[ 357.340104] Region number: 0x03
[ 357.343475] Format version: 0x02
[ 357.346790] Format flag: 0x01
[ 357.349834] Ram version: DEV_000000
[ 357.353447] Built date: 20220901175135
[ 357.357284] Common crc: 0xdc1c7789
[ 357.360763] Release info: header tag = 0, total length = 0
[ 357.449566] current sync CR = 0x7
[ 357.453502] efuse_probe: efuse = deaddead
[ 357.457530] rtmp_ee_load_from_bin::bin FileName = /tp_data/MT7981_EEPROM.bin, bin bak = /user_data1/MT7981_EEPROM.bin, use caled e2p file
[ 357.469947] Load EEPROM Buffer from /tp_data/MT7981_EEPROM.bin
[ 357.475791] rtmp_btn_load_from_bin::bin FileName = /tp_data/MT7981_BTNFLAG.bin, bin bak = /user_data1/MT7981_BTNFLAG.bin
[ 357.489184] 7981@C02L1,is_cal_free_ic() 831: [a-die version:1]
[ 359.913877] 7981@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now!
[ 359.921361] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000c321594a,Band=0,rfcap=1,channel=1,PhyMode=64 extCha=0xf
[ 359.932057] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000e9a89dc4,Band=1,rfcap=2,channel=36,PhyMode=128 extCha=0xf
[ 359.942958] 7981@C01L1,AntCfgInit() 3179: Not support for HIF_MT yet!
[ 359.963868] ch_switch_monitor_state_machine_init:: enter
[ 359.969177] ch_switch_monitor_cfg_reset:: enter
[ 359.973722] ch_switch_monitor_cfg_reset:: enter
[ 359.978555] 7981@C17L1,tx_pwr_comp_init() 641: NotSupportYet!
[ 359.984369] 7981@C12L1,SCS_init() 880: INIT SCSEnable [0]= 1
[ 359.990030] 7981@C12L1,SCS_init() 887: INIT SCSEnable [1]= 0
[ 359.995831] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 360.001328] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 360.006842] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited!
[ 360.033734] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 3
[ 360.039509] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 360.045034] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 360.050490] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 360.060414] 7981@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(0) cck_timeout Fail!
[ 360.069105] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 360.079012] 7981@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(0) ofdm_timeout Fail!
[ 360.087794] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 360.097699] 7981@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(0) ofdma_timeout Fail!
[ 360.106563] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 360.116467] 7981@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(1) cck_timeout Fail!
[ 360.125155] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 360.135059] 7981@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(1) ofdm_timeout Fail!
[ 360.143834] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 360.153738] 7981@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(1) ofdma_timeout Fail!
[ 360.162663] mt_wifi_init: Band = 0, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 360.171007] mt_wifi_init: Band = 0, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 360.184670] mt_wifi_init: Band = 1, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 360.193027] mt_wifi_init: Band = 1, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 360.211233] :(op = 1)
[ 360.218343] 7981@C00L1,FastPathCheckMIC() 1010: (ret = 0)(op:1)
[ 360.224278] 7981@C00L1,MtCmdCr4RedSet() 914: MtCmdCr4RedSet: (ret = 0)
[ 360.230793] 7981@C00L1,SendRedCmd() 1049: SendRedCmd:(ret = 1)
[ 360.236979] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.243347] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.249775] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.256129] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.262564] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.268903] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.275338] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.281680] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.288115] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.294462] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.300890] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.307272] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.313716] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.320060] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.326531] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.332893] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.339325] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.345681] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.352113] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.358462] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.364897] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.371237] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.377672] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.384019] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.390448] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 360.396795] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 360.403229] 7981@C23L1,DfsBuildChannelList() 3890: [RDM]: wdev is not 5G.
[ 360.410028] phy_freq_adjust : no prim_ch value for adjust!
[ 360.415515] 7981@C23L1,operate_loader_phy() 398: phy_freq_adjust failed!WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 360.429950] 7981@C23L1,HcGetBandByChannel() 1235: No hdev parking on channel:0, just return a default band_idx 0!
[ 360.440804] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 360.447984] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 360.454510] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[0] = 1
[ 360.461722] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 360.467387] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 360.472869] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 78, ACSChStat:0
[ 360.480172] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x10c/0x4b8 [mt_wifi])!!
[ 360.492559] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 360.932887] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 361.312872] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 361.692888] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 362.072875] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 362.452874] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 362.522956] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APUpdateOperationMode+0x114/0x278 [mt_wifi])!!
[ 362.832965] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 363.212876] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 363.592950] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 363.973027] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x258/0x4b8 [mt_wifi])!!
[ 363.985319] 7981@C23L0,SelectClearChannelBusyTime() 1890: [SelectClearChannelBusyTime] - band0 START
[ 363.994448] 7981@C23L0,SelectClearChannelBusyTime() 1891: [SelectClearChannelBusyTime] - cfg_ht_bw = 1 vht_bw = 0
[ 364.004701] 7981@C23L0,SelectClearChannelBusyTime() 1898: ====================================================================
[ 364.016090] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 2 : Busy Time = 4193, Skip Channel = FALSE, BwCap = TRUE
[ 364.027469] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 3 : Busy Time = 2497, Skip Channel = FALSE, BwCap = TRUE
[ 364.038849] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 4 : Busy Time = 1143, Skip Channel = FALSE, BwCap = TRUE
[ 364.050227] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 5 : Busy Time = 2819, Skip Channel = FALSE, BwCap = TRUE
[ 364.061606] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 6 : Busy Time = 8087, Skip Channel = FALSE, BwCap = TRUE
[ 364.072994] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 7 : Busy Time = 5932, Skip Channel = FALSE, BwCap = TRUE
[ 364.084418] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 8 : Busy Time = 2647, Skip Channel = FALSE, BwCap = TRUE
[ 364.095816] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 9 : Busy Time = 1548, Skip Channel = FALSE, BwCap = TRUE
[ 364.107204] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 10 : Busy Time = 6676, Skip Channel = FALSE, BwCap = TRUE
[ 364.118582] 7981@C23L0,SelectClearChannelBusyTime() 1907: ====================================================================
[ 364.129969] 7981@C23L0,SelectClearChannelBusyTime() 2179: Rule 3 Channel Busy time value : Select Primary Channel 4
[ 364.140397] 7981@C23L0,SelectClearChannelBusyTime() 2181: Rule 3 Channel Busy time value : Min Channel Busy = 1143
[ 364.150737] 7981@C23L0,SelectClearChannelBusyTime() 2186: Rule 3 Channel Busy time value : BW = 20
[ 364.159688] 7981@C23L0,SelectClearChannelBusyTime() 2225: [SelectClearChannelBusyTime] - band0 END
[ 364.168642] 7981@C00L0,ApAutoChannelAtBootUp() 407: Auto channel selection: Selected channel = 4, IsAband = 0
[ 364.178640] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 364.320817] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 364.331812] 7981@C23L1,DfsBuildChannelList() 3890: [RDM]: wdev is not 5G.
[ 364.338606] 7981@C00L0,ApAutoChannelAtBootUp() 599: <-----------------
[ 364.345367] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 364.350802] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 364.517589] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 364.842685] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 364.848151] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 365.014738] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 365.332668] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 365.338121] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 365.505017] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 365.822698] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 365.828143] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 365.862850] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!!
[ 365.995454] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 366.312687] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 366.318128] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 366.485289] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 366.802687] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 366.808130] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 366.975857] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 367.302727] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 367.308172] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 367.476949] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 367.792787] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 367.798359] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 367.966748] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 368.282709] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 368.288180] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 368.456826] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 368.772696] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 368.778151] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 368.945545] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 369.262674] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 369.268127] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 369.435478] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 369.752676] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 369.758115] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 369.926107] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 370.242643] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 370.385626] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 370.396677] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 370.538724] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 370.627882] 7981@C00L1,TxCCKStreamCtrl() 21830: set wrong parameters
[ 370.645376] PrintSrCmd:
[ 370.645376] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 370.645376] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 370.659386] PrintSrCmd:
[ 370.659386] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 370.659386] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 370.673390] PrintSrCmd:
[ 370.673390] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 370.673390] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 370.687403] PrintSrCmd:
[ 370.687403] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 370.687403] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 370.701501] PrintSrCmd:
[ 370.701501] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 370.701501] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 370.715595] PrintSrCmd:
[ 370.715595] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 370.715595] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 370.729718] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 370.740819] extif_set_dev(ra0)
[ 370.741626] [mtf_txpower_all_rate_info] band_idx:0 pwr:32 ChBand:2G ePAGain:0
[ 370.743969] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
[ 370.775078] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 370.781406] br-lan: port 4(ra0) entered blocking state
[ 370.786591] br-lan: port 4(ra0) entered forwarding state
=====>>>>>del tp_ie for vap ra0
iwpriv ra0 set [ 370.798169] Set_TP_IE_Proc():clear tp ie operation.
tp_ie=
iwpriv ra0 set mapEnable=0
iwpriv ra0 set mapR2Enable=0
[ 370.814409] Set_Map_Proc: disabled MAP
[ 370.817164] Set_MapR2_Proc: MAP R2 is disabled
iwpriv ra0 set SSID=0xDEADBEEF
[ 370.945383] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 370.956723] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 371.043888] Set_HighPriMcs(): input param error
[ 371.043888] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 371.043888] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 371.043888] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 371.043888] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set HideSSID=0
mumimo_config ra0 1
iwpriv ra0 set MuMimo=1
iwpriv ra0 set BeaconPeriod=100
[ 371.093435] sync for : ra0
iwpriv ra0 set RTSThreshold=2346
[ 371.104239] Set_RTSThreshold_Proc: set wdev0 rts length threshold=2346(0x92a)
iwpriv ra0 set FragThreshold=234[ 371.114190] Set_FragThreshold_Proc::set wdev0 FragThreshold=2346)
6
iwpriv ra0 set DtimPeriod=1
iwpriv ra0 set WmmCapable=1
iwpriv ra0 set NoForwarding=0
iwpriv ra0 set NoForwardingBTNBSSID=0
iwpriv ra0 set UAPSDCapable=1
killall -q -SIGINT rt2860apd
iwpriv ra0 set AuthMode=WPA2PSK
iwpriv ra0 set EncrypType=AES
iwpriv ra0 set IEEE8021X=0
iwpriv ra0 set RekeyInterval=0
iwpriv ra0 set WPAPSK=F4k3nsz1t.8
iwpriv ra0 set WscConfMode=7
iwpriv ra0 set WscConfStatus=2
iwpriv ra0 set WscVendorPinCode=93350273
iwpriv ra0 set WscLab[ 371.417354] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
elDisabled=0
iwpriv ra0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv ra0 set AccessPolicy=0
iwpriv ra0 set HideSSID=0
iwpriv ra0 set SSID=0xDEADBEEF
[ 371.446718] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 371.534894] Set_HighPriMcs(): input param error
[ 371.534894] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 371.534894] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 371.534894] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 371.534894] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set hw_nat_register=1
[ 371.567701] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
brctl addif br-lan ra0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra1
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra1
ifconfig ra1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra3
[ 372.795024] ath_band_steering_netlink_receive 161 pid = 7526
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra3
ifconfig ra3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apcli0
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan apcli0
[ 373.465420] device apcli0 left promiscuous mode
[ 373.470539] br-lan: port 5(apcli0) entered disabled state
ifconfig apcli0 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl[ 373.595581] br-lan: port 5(apcli0) entered blocking state
setifvlan br-la[ 373.601066] br-lan: port 5(apcli0) entered disabled state
n ra1 4 1
can't[ 373.608170] device apcli0 entered promiscuous mode
set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra2
gp_id_rand = 45d6
random_suffix = 45d6
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra4
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra4
ifconfig ra4 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_start_interface wifi1
wifi_vap_local rax0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig rax0 up
[ 375.354413] phy_freq_adjust : no prim_ch value for adjust!
[ 375.359897] 7981@C23L1,operate_loader_phy() 398: phy_freq_adjust failed!WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
[ 375.375649] 7981@C23L1,HcGetBandByChannel() 1235: No hdev parking on channel:0, just return a default band_idx 0!
[ 375.386518] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 375.393700] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 375.400218] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[1] = 1
[ 375.407411] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 375.412928] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 375.418315] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 177, ACSChStat:0
[ 375.425694] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x10c/0x4b8 [mt_wifi])!!
[ 375.438042] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 376.142871] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 376.652875] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 376.902896] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!!
[ 377.152862] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 377.662889] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 377.982870] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 378.302867] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 378.622974] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 378.943022] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:MTAPAutoSelectChannel+0x258/0x4b8 [mt_wifi])!!
[ 378.955325] 7981@C23L0,SelectClearChannelBusyTime() 1890: [SelectClearChannelBusyTime] - band1 START
[ 378.964466] 7981@C23L0,SelectClearChannelBusyTime() 1891: [SelectClearChannelBusyTime] - cfg_ht_bw = 1 vht_bw = 2
[ 378.974737] 7981@C23L0,SelectClearChannelBusyTime() 1898: ====================================================================
[ 378.986196] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 36 : Busy Time = 2591, Skip Channel = FALSE, BwCap = TRUE
[ 378.997587] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 40 : Busy Time = 964, Skip Channel = FALSE, BwCap = TRUE
[ 379.009056] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 44 : Busy Time = 1179, Skip Channel = FALSE, BwCap = TRUE
[ 379.020468] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 48 : Busy Time = 1650, Skip Channel = FALSE, BwCap = TRUE
[ 379.031851] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 52 : Busy Time = 1141, Skip Channel = FALSE, BwCap = TRUE
[ 379.043237] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 56 : Busy Time = 23, Skip Channel = FALSE, BwCap = TRUE
[ 379.054617] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 60 : Busy Time = 1105, Skip Channel = FALSE, BwCap = TRUE
[ 379.065997] 7981@C23L0,SelectClearChannelBusyTime() 1904: Channel 64 : Busy Time = 400, Skip Channel = FALSE, BwCap = TRUE
[ 379.077476] 7981@C23L0,SelectClearChannelBusyTime() 1907: ====================================================================
[ 379.088911] 7981@C23L0,SelectClearChannelBusyTime() 2174: Select Primary Channel 40 from bw160PreferCh[]!
[ 379.098478] 7981@C23L0,SelectClearChannelBusyTime() 2179: Rule 3 Channel Busy time value : Select Primary Channel 40
[ 379.109142] 7981@C23L0,SelectClearChannelBusyTime() 2181: Rule 3 Channel Busy time value : Min Channel Busy = 2591
[ 379.119511] 7981@C23L0,SelectClearChannelBusyTime() 2186: Rule 3 Channel Busy time value : BW = 160
[ 379.128888] 7981@C23L0,SelectClearChannelBusyTime() 2225: [SelectClearChannelBusyTime] - band1 END
[ 379.137916] 7981@C00L0,ApAutoChannelAtBootUp() 407: Auto channel selection: Selected channel = 40, IsAband = 1
[ 379.147939] 7981@C12L0,Adj_ZeroWait_Status_Update() 1076: Adj_ZeroWait_Status_Update(1076), Channel(40), OutBandCh(0), vht_bw(2), OutBandBw(0), BW160ZeroWaitState(0)
[ 379.162724] 7981@C12L0,Adj_ZeroWait_Status_Update() 1156: Adj_ZeroWait_Status_Update(1156), Channel(40), OutBandCh(0), vht_bw(2), OutBandBw(0), BW160ZeroWaitState(1)
[ 379.178022] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 379.426081] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 379.437569] 7981@C00L0,ApAutoChannelAtBootUp() 599: <-----------------
[ 379.543838] PrintSrCmd:
[ 379.543838] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 379.543838] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 379.557951] PrintSrCmd:
[ 379.557951] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 379.557951] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 379.572041] PrintSrCmd:
[ 379.572041] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 379.572041] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 379.586109] PrintSrCmd:
[ 379.586109] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 379.586109] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 379.600551] PrintSrCmd:
[ 379.600551] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 379.600551] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 379.614764] PrintSrCmd:
[ 379.614764] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 379.614764] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 379.629310] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 379.640441] extif_set_dev(rax0)
[ 379.643648] [mtf_txpower_all_rate_info] band_idx:1 pwr:38 ChBand:5G ePAGain:0
[ 379.650788] mtk_ppe_dev_register_hook : ineterface rax0 register (2)
[ 379.657398] br-lan: port 8(rax0) entered blocking state
[ 379.662638] br-lan: port 8(rax0) entered forwarding state
=====>>>>>del tp_ie for vap rax0[ 379.672392] ath_band_steering_netlink_receive 161 pid = 7526
iwpriv rax0 set tp_ie=
[ 379.682147] Set_TP_IE_Proc():clear tp ie operation.
iwpriv rax0 set mapEnable=0
[ 379.690063] Set_Map_Proc current MAP MODE is 0
iwpriv rax0 set mapR2Enable=0
[ 379.697263] Set_MapR2_Proc MAP R2 is already disabled
iwpriv rax0 set SSID=0xDEADBEEF
[ 379.965772] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 379.976802] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 379.996703] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 380.007909] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set HideSSID=0
mumimo_config rax0 1
iwpriv rax0 set MuMimo=1
iwpriv rax0 set BeaconPeriod=100
[ 380.124608] sync for : ra0
[ 380.128198] sync for : rax0
iwpriv rax0 set RTSThreshold=2346
[ 380.151530] Set_RTSThreshold_Proc: set wdev5 rts length threshold=2346(0x92a)
iwpriv rax0 set FragThreshold=23[ 380.161255] Set_FragThreshold_Proc::set wdev5 FragThreshold=2346)
46
iwpriv rax0 set DtimPeriod=1
iwpriv rax0 set WmmCapable=1
iwpriv rax0 set NoForwarding=0
iwpriv rax0 set NoForwardingBTNBSSID=0
iwpriv rax0 set UAPSDCapable=1
killall -q -SIGINT rt2860apd_x
iwpriv rax0 set AuthMode=WPA2PSK
iwpriv rax0 set EncrypType=AES
iwpriv rax0 set IEEE8021X=0
iwpriv rax0 set RekeyInterval=0
iwpriv rax0 set WPAPSK=F4k3nsz1t.8
iwpriv rax0 set WscConfMode=7
iwpriv rax0 set WscConfStatus=2
iwpriv rax0 [ 380.338495] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
set WscVendorPinCode=93350273
iwpriv rax0 set WscLabelDisabled=0
iwpriv rax0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv rax0 set AccessPolicy=0
i[ 380.362720] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
wpriv rax0 set HideSSID=0
iwpriv rax0 set SSID=[ 380.374609] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
0xDEADBEEF
[ 380.395517] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 380.406598] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set hw_nat_register=[ 380.496244] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
1
[ 380.505215] mtk_ppe_dev_register_hook : rax0 has been registered in wifi_hook_if table[2]
brctl addif br-lan rax0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax1
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax1
ifconfig rax1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax3
[ 381.681970] ath_band_steering_netlink_receive 161 pid = 7526
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax3
ifconfig rax3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apclix0
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan apclix0
[ 382.352147] device apclix0 left promiscuous mode
[ 382.357530] br-lan: port 6(apclix0) entered disabled state
ifconfig apclix0 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brct[ 382.517981] br-lan: port 6(apclix0) entered blocking state
l setifvlan br-l[ 382.524105] br-lan: port 6(apclix0) entered disabled state
an ra2 3 1
brct[ 382.531137] device apclix0 entered promiscuous mode
l addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax2
gp_id_rand = 45d6
random_suffix = 45d6
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax4
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax4
ifconfig rax4 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
nrd: stopping
nrd: 7526
nrd: starting daemon, AP steering is off, Band steering is on
[ 384.015949] ath_band_steering_netlink_receive 161 pid = 14652
[ 384.023189] ath_band_steering_netlink_receive 161 pid = 14652
[ 384.035590] ath_band_steering_netlink_receive 161 pid = 14652
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
cwmp: stop cwmp
sys_mode=router, data_model=tr181
saveconfig() begin
saveconfig() end
cwmp: stop cwmp
sys_mode=router, data_model=tr181
saveconfig() begin
saveconfig() end
cwmp: stop cwmp
sys_mode=router, data_model=tr181
saveconfig() begin
saveconfig() end
cwmp: stop cwmp
sys_mode=router, data_model=tr181
saveconfig() begin
saveconfig() end
cwmp: router mode : start cwmp
saveconfig() begin
saveconfig() end
cwmp: stop cwmp
sys_mode=router, data_model=tr181
saveconfig() begin
saveconfig() end
cwmp: router mode : start cwmp
saveconfig() begin
saveconfig() end
cwmp: stop cwmp
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() begin
saveconfig() end
saveconfig() end
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
=====config smart connect
nrd: stopping
nrd: 14652
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
wifi_mode wifi0 wifi1
wifi_reload_local
nrd: starting daemon, AP steering is off, Band steering is on
[ 521.450332] ath_band_steering_netlink_receive 161 pid = 23599
[ 521.457947] ath_band_steering_netlink_receive 161 pid = 23599
[ 521.468888] ath_band_steering_netlink_receive 161 pid = 23599
wifi_led_set 2g = ON, 5g = ON
========= don't cli WIFI-led when not cal
wifi_shutdown_interface wifi0
ifconfig ra0 down
[ 521.737274] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 521.752292] extif_put_dev(ra0)
[ 521.755456] mtk_ppe_dev_unregister_hook : ineterface ra0 set null (1)
[ 521.764044] br-lan: port 4(ra0) entered disabled state
ifconfig ra1 down
ifconfig ra3 down
ifconfig apcli0 down
ifconfig ra2 down
ifconfig ra4 down
wifi_config_profile wifi0
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SSID1=0xDEADBEEF>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra3 skipped
=====>>>>> wifi0: vif apcli0 skipped
config_profile_set, SSID3=QvtNGxlLupdotioxeBqNHYzEmUi4tk>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra4 skipped
config_profile_set, WirelessMode=16>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_BW=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BSSCoexistence=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, Channel=5>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_EXTCHA=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AutoChannelSelect=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaDlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaUlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TWTSupport=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
wifi_shutdown_interface wifi1
ifconfig rax0 down
[ 524.005244] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 524.020515] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 524.032513] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(1) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 524.044298] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(2) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 524.056024] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(3) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 524.067674] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(4) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 524.079357] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 524.091069] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(6) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 524.102795] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(7) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 524.114471] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(8) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 524.126195] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(9) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 524.137920] ch_switch_monitor_exit:: Exit
[ 524.147035] current sync CR = 0x7
[ 524.150378] current sync CR = 0x7
[ 524.154726] current sync CR = 0x7
[ 524.159030] current sync CR = 0x7
[ 524.163341] current sync CR = 0x1
[ 524.267408] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 0
[ 524.273083] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 0
[ 524.278735] warp_woctrl_send_msg_and_wait_cr(), idx:0, state:DISABLE
[ 524.285097] warp_woctrl_send_msg_and_wait_cr(): wait for wocpu
[ 524.290915] [tmp]warp_woctrl_send_msg_and_wait_cr(): wait for wocpu, value:1, value_done:1
[ 524.299170] warp_woctrl_send_msg_and_wait_cr(): wocpu is ready, done_value:1
[ 524.306213] warp_woctrl_kickout(), idx: 0, state:HALT
[ 524.311249] warp_woctrl_kickout(): wait for wocpu
[ 524.315949] [tmp]warp_woctrl_kickout(): wait for wocpu, value:7, value_done:7
[ 524.323074] warp_woctrl_kickout(): wocpu is ready, done_value:7
[ 524.350404] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 524.360176] [Nop_List_Backup] NopList Channel count:0 <----
[ 524.432554] wed_ser_task(): wed_ser exist, wed->irq=7!
[ 524.443187] wo_exception_exit(0): wo_exception_exit done
[ 524.448509] warp_msg_receive(),go,warp,10022,0
[ 524.452970] warp_msg_process(): module id(0), wed_idx(0), something wrong(ret = -1)
[ 524.460650] warp_msg_unregister():done
[ 524.464606] warp_client_remove(): warp entry clear done!!
[ 524.470003] extif_put_dev(rax0)
[ 524.473195] mtk_ppe_dev_unregister_hook : ineterface rax0 set null (2)
[ 524.481835] br-lan: port 8(rax0) entered disabled state
ifconfig rax1 do[ 524.490338] 7981@C12L1,rt28xx_ap_ioctl() 853: interface is down, cmd [8be1] return!!!
wn
ifconfig rax3 down
ifconfig apclix0 down
ifconfig rax2 down
ifconfig rax4 down
wifi_config_profile wifi1
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID1=0xDEADBEEF>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE_5G>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax3 skipped
=====>>>>> wifi1: vif apclix0 skipped
config_profile_set, SSID3=9gWuE7wE7zJzMcyCn9jK61EorBeHe2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax4 skipped
config_profile_set, WirelessMode=17>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_BW=2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, Channel=48>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_EXTCHA=>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSelect=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSkipList=100;104;108;112;116;120;124;128;132;136;140>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, IEEE80211H=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWait=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsDedicatedZeroWait=3>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWaitDefault=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaDlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaUlEnable=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TWTSupport=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
Node 0, zone DMA32 401 584 390 227 139 111 52 19 12 7 64
wifi_start_interface wifi0
wifi_vap_local ra0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig ra0 up
[ 527.661980] client_get_axi_slot_id(): wrong BUS_TYPE
[ 527.666990] warp_cap_support(): chip_id=7981 is in WHNAT support list
[ 527.673514] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entry: 000000001ad8d815
[ 527.682197] client_hif_specific_get(): hw->base_phy_addr 0x18000000!!
[ 527.688644] client_chip_specific_get(): 0x7981 chip id 0x7981!!
[ 527.694661] warp_entry_get_by_pdev(): return entry[0]
[ 527.699906] warp_msg_register():warp,pid,26146,id,0,wed_idx,0
[ 527.705768] warp_dev3 15010000.wed: Using 32bit DMA for streaming map
[ 527.712204] warp_dev3 15010000.wed: Using 32bit DMA for coherent map
[ 527.718592] wed_init(0): res_start = 0x15010000, size = 1000, irq=7,base_addr=0xffffffc010051000
[ 527.727795] wed_ring_init(): wed tx ring init result = 0
[ 527.733694] wed_ring_init(): wed rx ring init result = 0
[ 527.748533] create wed ok!!!
[ 527.751436] wdma_init(): wdma(0) base_addr=0xffffffc010a97800, base_phy_addr=0x15104800
[ 527.760302] warp_woif_bus_init_hw(): bus:000000003fa799db, txring: 20, pa: 0x0000000052a94000, 0x0000000052a94000, 24, 28, 3c
[ 527.771620] warp_woif_bus_init_hw(): bus:000000003fa799db, rxring: 50, pa: 0x0000000052dfc000, 0x0000000052dfc000, 54, 58, 6c
[ 527.782988] get_region_info(): wed_idx = 0, base_addr = 0x000000006c07472a, size = 0x40000, res.start = 0x47d80000, shared:0
[ 527.794223] get_region_info(): wed_idx = 0, base_addr = 0x000000008db61ac3, size = 0x8000, res.start = 0x151e0000, shared:0
[ 527.805395] get_region_info(): wed_idx = 0, base_addr = 0x0000000051925612, size = 0x240000, res.start = 0x47dc0000, shared:1
[ 527.816707] get_region_info(): wed_idx = 0, base_addr = 0x00000000cfc536b9, size = 0x1000, res.start = 0x15194000, shared:0
[ 527.827830] warp_fwdl_mcu_mode(): mcu mode, need fwdl
[ 527.835404] ########## WO Firmware ##########
[ 527.839757] Chip ID: 0x0000
[ 527.842597] ECO version:0
[ 527.845207] Version: DEV_000000
[ 527.848336] Build date: 20220901175230
[ 527.852070] Total region:3
[ 527.854789] #################################
[ 527.859131] Parsing tailer region 0
[ 527.862618] Target address: 0x151e0000
[ 527.866440] Download size: 20768
[ 527.869769] Parsing tailer region 1
[ 527.873260] Target address: 0x47d80000
[ 527.877083] Download size: 86224
[ 527.880457] Parsing tailer region 2
[ 527.883949] Target address: 0x47dc0000
[ 527.887772] Download size: 2319824
[ 527.893141] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu
[ 527.910018] warp_fwdl_ready_check_mcu_mode(): wocpu is ready
[ 527.915727] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE
[ 527.921642] wo_proc_init done 000000008e4e9bde
[ 527.926173] wo_exep_proc_init done 000000008e4e9bde
[ 527.931169] wo_exception_init(0): exp log= 0x00000000f0676c44, phy_addr= 0x0000000053578000 size= 32768
[ 528.054719] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS0 PhyMode=78
[ 528.061328] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS1 PhyMode=78
[ 528.067997] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS2 PhyMode=78
[ 528.074611] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS3 PhyMode=78
[ 528.081221] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS4 PhyMode=78
[ 528.087846] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS5 PhyMode=177
[ 528.094556] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS6 PhyMode=177
[ 528.101244] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS7 PhyMode=177
[ 528.107948] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS8 PhyMode=177
[ 528.114650] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS9 PhyMode=177
[ 528.203579] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=0, Desired MFPC=0
[ 528.210968] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=1, Desired MFPC=0
[ 528.218367] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=2, Desired MFPC=0
[ 528.225761] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=3, Desired MFPC=0
[ 528.233153] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=4, Desired MFPC=0
[ 528.240536] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=5, Desired MFPC=0
[ 528.247934] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=6, Desired MFPC=0
[ 528.255323] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=7, Desired MFPC=0
[ 528.262716] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=8, Desired MFPC=0
[ 528.270105] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=9, Desired MFPC=0
[ 528.280467] 7981@C12L1,RTMPSetProfileParameters() 8685: ra0, QoSMgmtCapa=0
[ 528.287348] 7981@C12L1,RTMPSetProfileParameters() 8685: ra1, QoSMgmtCapa=0
[ 528.294223] 7981@C12L1,RTMPSetProfileParameters() 8685: ra2, QoSMgmtCapa=0
[ 528.301084] 7981@C12L1,RTMPSetProfileParameters() 8685: ra3, QoSMgmtCapa=0
[ 528.307957] 7981@C12L1,RTMPSetProfileParameters() 8685: ra4, QoSMgmtCapa=0
[ 528.314834] 7981@C12L1,RTMPSetProfileParameters() 8685: rax0, QoSMgmtCapa=0
[ 528.321783] 7981@C12L1,RTMPSetProfileParameters() 8685: rax1, QoSMgmtCapa=0
[ 528.328744] 7981@C12L1,RTMPSetProfileParameters() 8685: rax2, QoSMgmtCapa=0
[ 528.335719] 7981@C12L1,RTMPSetProfileParameters() 8685: rax3, QoSMgmtCapa=0
[ 528.342683] 7981@C12L1,RTMPSetProfileParameters() 8685: rax4, QoSMgmtCapa=0
[ 528.359439] 7981@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[0] ApCliMuMimoDlEnable = 0
[ 528.367959] 7981@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[1] ApCliMuMimoDlEnable = 0
[ 528.376714] 7981@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[0] ApCliMuMimoUlEnable = 0
[ 528.385233] 7981@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[1] ApCliMuMimoUlEnable = 0
[ 528.500356] BandIdx = 0, tpcDutyInitFlag=1
[ 528.504451] BandIdx = 1, tpcDutyInitFlag=1
[ 528.508794] BandIdx = 0, tpcnitFlag=1
[ 528.512443] BandIdx = 1, tpcnitFlag=1
[ 528.516376] BandIdx = 0, tpcDuty=100-75-50-25
[ 528.520720] BandIdx = 1, tpcDuty=100-75-50-25
[ 528.525347] BandIdx = 0, thermalHighEn=1
[ 528.529256] BandIdx = 1, thermalHighEn=1
[ 528.533447] BandIdx = 0, thermalHighCritera=125
[ 528.537963] BandIdx = 1, thermalHighCritera=125
[ 528.542755] BandIdx = 0, thermalLowEn=1
[ 528.546577] BandIdx = 1, thermalLowEn=1
[ 528.550663] BandIdx = 0, thermalLowCritera=118
[ 528.555108] BandIdx = 1, thermalLowCritera=118
[ 528.559808] BandIdx = 0, thermalRecheckTime=5
[ 528.564165] BandIdx = 1, thermalRecheckTime=5
[ 528.568772] BandIdx = 0, thermalRFOffEn=0
[ 528.572781] BandIdx = 1, thermalRFOffEn=0
[ 528.577044] BandIdx = 0, thermalRFOffCriteria=125
[ 528.581732] BandIdx = 1, thermalRFOffCriteria=125
[ 528.586704] BandIdx = 0, thermalUcType=1
[ 528.590613] BandIdx = 1, thermalUcType=1
[ 528.597720] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 528.609501] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 528.624527] warp_tx_ring_init_hw(): configure ring 0 setting
[ 528.630185] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24420=55800000,24424=2048,24428=0
[ 528.640465] warp_tx_ring_init_hw(): configure ring 1 setting
[ 528.646128] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24430=52a38000,24434=2048,24438=0
[ 528.656502] set_rrocfg,0
[ 528.681910] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 3
[ 528.687578] using E1 ROM patch
[ 528.690618] using E1 RAM
[ 528.693158] current sync CR = 0x1
[ 528.696563] Built date: 20230602235633a
[ 528.700481] Platform: ALPS
[ 528.703289] HW/SW version: 0x8a108a10
[ 528.707030] Patch version: 0xffffffff
[ 528.710862] current sync CR = 0x1
[ 528.718472] Chip ID: 0x14
[ 528.721180] Eco version: 0x00
[ 528.724256] Region number: 0x0b
[ 528.727473] Format version: 0x02
[ 528.730775] Format flag: 0x01
[ 528.733832] Ram version: ____000000
[ 528.737401] Built date: 20230602235650
[ 528.741229] Common crc: 0x9212bfc6
[ 528.744722] Release info: header tag = 0, total length = 0
[ 528.771627] Chip ID: 0x00
[ 528.774369] Eco version: 0x00
[ 528.777412] Region number: 0x03
[ 528.780628] Format version: 0x02
[ 528.783953] Format flag: 0x01
[ 528.787000] Ram version: DEV_000000
[ 528.790566] Built date: 20220901175135
[ 528.794413] Common crc: 0xdc1c7789
[ 528.797892] Release info: header tag = 0, total length = 0
[ 528.886037] current sync CR = 0x7
[ 528.889886] efuse_probe: efuse = deaddead
[ 528.893936] rtmp_ee_load_from_bin::bin FileName = /tp_data/MT7981_EEPROM.bin, bin bak = /user_data1/MT7981_EEPROM.bin, use caled e2p file
[ 528.906532] Load EEPROM Buffer from /tp_data/MT7981_EEPROM.bin
[ 528.912361] rtmp_btn_load_from_bin::bin FileName = /tp_data/MT7981_BTNFLAG.bin, bin bak = /user_data1/MT7981_BTNFLAG.bin
[ 528.925950] 7981@C02L1,is_cal_free_ic() 831: [a-die version:1]
[ 531.351441] 7981@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now!
[ 531.358941] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000c321594a,Band=0,rfcap=1,channel=1,PhyMode=64 extCha=0xf
[ 531.369636] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000e9a89dc4,Band=1,rfcap=2,channel=36,PhyMode=128 extCha=0xf
[ 531.380562] 7981@C01L1,AntCfgInit() 3179: Not support for HIF_MT yet!
[ 531.401480] ch_switch_monitor_state_machine_init:: enter
[ 531.406808] ch_switch_monitor_cfg_reset:: enter
[ 531.411328] ch_switch_monitor_cfg_reset:: enter
[ 531.416430] 7981@C17L1,tx_pwr_comp_init() 641: NotSupportYet!
[ 531.422242] 7981@C12L1,SCS_init() 880: INIT SCSEnable [0]= 1
[ 531.427937] 7981@C12L1,SCS_init() 887: INIT SCSEnable [1]= 0
[ 531.433721] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 531.439214] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 531.444726] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited!
[ 531.471586] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 3
[ 531.477366] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 531.482883] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 531.488341] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 531.498283] 7981@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(0) cck_timeout Fail!
[ 531.506978] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 531.516886] 7981@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(0) ofdm_timeout Fail!
[ 531.525663] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 531.535575] 7981@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(0) ofdma_timeout Fail!
[ 531.544438] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 531.554343] 7981@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(1) cck_timeout Fail!
[ 531.563031] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 531.572937] 7981@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(1) ofdm_timeout Fail!
[ 531.581707] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 531.591616] 7981@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(1) ofdma_timeout Fail!
[ 531.600549] mt_wifi_init: Band = 0, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 531.608908] mt_wifi_init: Band = 0, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 531.622577] mt_wifi_init: Band = 1, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 531.630920] mt_wifi_init: Band = 1, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 531.649140] :(op = 1)
[ 531.656250] 7981@C00L1,FastPathCheckMIC() 1010: (ret = 0)(op:1)
[ 531.662181] 7981@C00L1,MtCmdCr4RedSet() 914: MtCmdCr4RedSet: (ret = 0)
[ 531.668710] 7981@C00L1,SendRedCmd() 1049: SendRedCmd:(ret = 1)
[ 531.675001] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.681370] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.687814] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.694163] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.700591] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.706938] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.713375] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.719714] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.726150] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.732491] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.738928] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.745274] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.751701] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.758047] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.764484] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.770824] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.777263] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.783612] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.790041] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.796389] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.802825] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.809164] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.815600] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.821941] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.828378] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 531.834724] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 531.841152] 7981@C23L1,DfsBuildChannelList() 3890: [RDM]: wdev is not 5G.
[ 531.848099] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 532.046230] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 532.057271] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 532.067157] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 532.074364] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 532.080879] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[0] = 0
[ 532.088221] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 532.093800] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 532.099189] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 78, ACSChStat:0
[ 532.106244] 7981@C00L1,ApAutoChannelAtBootUp() 513: not A band
[ 532.112068] 7981@C08L1,ap_run_at_boot() 639:  ACS is disable !!
[ 532.118879] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 532.124348] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 532.291585] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 532.612697] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 532.618177] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 532.785550] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 533.102689] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 533.108130] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 533.275454] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 533.592670] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 533.598105] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 533.765834] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 534.082683] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 534.088122] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 534.256238] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 534.572679] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 534.578133] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 534.746269] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 535.032959] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APUpdateOperationMode+0x114/0x278 [mt_wifi])!!
[ 535.062692] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 535.068131] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 535.235354] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 535.552680] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 535.558118] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 535.728809] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 536.052697] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 536.058136] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 536.226839] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 536.542704] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 536.548161] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 536.716503] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 537.032686] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 537.038141] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 537.205698] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 537.242852] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!!
[ 537.522691] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 537.528147] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 537.696739] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 538.012693] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 538.018147] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 538.186807] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 538.502668] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 538.646220] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 538.657295] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 538.799759] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 538.887703] 7981@C00L1,TxCCKStreamCtrl() 21830: set wrong parameters
[ 538.905375] PrintSrCmd:
[ 538.905375] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 538.905375] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 538.919410] PrintSrCmd:
[ 538.919410] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 538.919410] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 538.933481] PrintSrCmd:
[ 538.933481] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 538.933481] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 538.947486] PrintSrCmd:
[ 538.947486] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 538.947486] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 538.961561] PrintSrCmd:
[ 538.961561] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 538.961561] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 538.975663] PrintSrCmd:
[ 538.975663] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 538.975663] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 538.989800] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 539.000814] extif_set_dev(ra0)
[ 539.003928] [mtf_txpower_all_rate_info] band_idx:0 pwr:32 ChBand:2G ePAGain:0
[ 539.011056] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
[ 539.017571] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 539.023861] br-lan: port 4(ra0) entered blocking state
[ 539.028988] br-lan: port 4(ra0) entered forwarding state
=====>>>>>del tp[ 539.036419] ath_band_steering_netlink_receive 161 pid = 23599
_ie for vap ra0
[ 539.038117] Set_TP_IE_Proc():clear tp ie operation.
iwpriv ra0 set tp_ie=
iwpriv ra0 set mapEnable=0
iwpriv ra0 set mapR2Enable=0[ 539.052154] Set_Map_Proc: disabled MAP
[ 539.054893] Set_MapR2_Proc MAP R2 is already disabled
iwpriv ra0 set SSID=0xDEADBEEF
[ 539.153378] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 539.164522] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 539.251171] Set_HighPriMcs(): input param error
[ 539.251171] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 539.251171] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 539.251171] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 539.251171] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set HideSSID=0
mumimo_config ra0 1
iwpriv ra0 set MuMimo=1
iwpriv ra0 set BeaconPeriod=100
[ 539.289175] sync for : ra0
iwpriv ra0 set RTSThreshold=2346[ 539.295199] Set_RTSThreshold_Proc: set wdev0 rts length threshold=2346(0x92a)
iwpriv ra0 set FragThreshold=234[ 539.305558] Set_FragThreshold_Proc::set wdev0 FragThreshold=2346)
6
iwpriv ra0 set DtimPeriod=1
iwpriv ra0 set WmmCapable=1
iwpriv ra0 set NoForwarding=0
iwpriv ra0 set NoForwardingBTNBSSID=0
iwpriv ra0 set UAPSDCapable=1
killall -q -SIGINT rt2860apd
iwpriv ra0 set AuthMode=WPA2PSK
iwpriv ra0 set EncrypType=AES
iwpriv ra0 set IEEE8021X=0
iwpriv ra0 set RekeyInterval=0
iwpriv ra0 set WPAPSK=F4k3nsz1t.8
iwpriv ra0 set WscConfMode=7
iwpriv ra0 set WscConfStatus=2
iwpriv ra0 set WscV[ 539.478280] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
endorPinCode=93350273
iwpriv ra0 set WscLabelDisabled=0
iwpriv ra0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv ra0 set AccessPolicy=0
iwpri[ 539.503136] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
v ra0 set HideSSID=0
iwpriv ra0 set SSID=0xDEADBEEF
[ 539.514719] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 539.602755] Set_HighPriMcs(): input param error
[ 539.602755] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 539.602755] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 539.602755] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 539.602755] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set hw_nat_register=1[ 539.633468] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
brctl addif br-lan ra0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra1
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra1
ifconfig ra1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
saveconfig() begin
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra3
saveconfig() begin
saveconfig() end
saveconfig() end
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra3
ifconfig ra3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apcli0
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan apcli0
[ 541.813123] device apcli0 left promiscuous mode
[ 541.818022] br-lan: port 5(apcli0) entered disabled state
ifconfig apcli0 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to [ 541.966867] br-lan: port 5(apcli0) entered blocking state
bridge br-lan: I[ 541.973509] br-lan: port 5(apcli0) entered disabled state
nvalid argument
[ 541.980440] device apcli0 entered promiscuous mode
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra2
gp_id_rand = 45d6
random_suffix = 45d6
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra4
[ 543.054117] ath_band_steering_netlink_receive 161 pid = 23599
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra4
ifconfig ra4 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_start_interface wifi1
wifi_vap_local rax0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig rax0 up
[ 544.501905] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 544.955174] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 544.966209] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
[ 544.977200] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 544.984382] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 544.990898] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[1] = 0
[ 544.998172] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 545.003870] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 545.009262] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 177, ACSChStat:0
[ 545.016498] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 545.036095] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 545.047129] 7981@C00L0,ApAutoChannelAtBootUp() 599: <-----------------
[ 545.144054] PrintSrCmd:
[ 545.144054] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 545.144054] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 545.158054] PrintSrCmd:
[ 545.158054] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 545.158054] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 545.172049] PrintSrCmd:
[ 545.172049] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 545.172049] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 545.186048] PrintSrCmd:
[ 545.186048] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 545.186048] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 545.200131] PrintSrCmd:
[ 545.200131] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 545.200131] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 545.214215] PrintSrCmd:
[ 545.214215] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 545.214215] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 545.228322] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 545.239324] extif_set_dev(rax0)
[ 545.240147] [mtf_txpower_all_rate_info] band_idx:1 pwr:38 ChBand:5G ePAGain:0
[ 545.242460] mtk_ppe_dev_register_hook : ineterface rax0 register (2)
[ 545.256216] br-lan: port 8(rax0) entered blocking state
[ 545.261440] br-lan: port 8(rax0) entered forwarding state
[ 545.269220] ath_band_steering_netlink_receive 161 pid = 23599
=====>>>>>del tp_ie for vap rax0
iwpriv rax0 se[ 545.278177] Set_TP_IE_Proc():clear tp ie operation.
t tp_ie=
iwpriv rax0 set mapEnable=0
[ 545.286797] Set_Map_Proc current MAP MODE is 0
iwpriv rax0 set mapR2Enable=0
[ 545.294436] Set_MapR2_Proc MAP R2 is already disabled
iwpriv rax0 set SSID=0xDEADBEEF
[ 545.362675] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 545.374036] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 545.394451] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 545.405534] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set HideSSID=0
mumimo_config rax0 1
iwpriv rax0 set MuMimo=1
iwpriv rax0 set [ 545.500185] sync for : ra0
BeaconPeriod=100[ 545.504515] sync for : rax0
iwpriv rax0 set RTSThreshold=234[ 545.510886] Set_RTSThreshold_Proc: set wdev5 rts length threshold=2346(0x92a)
6
iwpriv rax0 set FragThreshold=23[ 545.521206] Set_FragThreshold_Proc::set wdev5 FragThreshold=2346)
46
iwpriv rax0 set DtimPeriod=1
iwpriv rax0 set WmmCapable=1
iwpriv rax0 set NoForwarding=0
iwpriv rax0 set NoForwardingBTNBSSID=0
iwpriv rax0 set UAPSDCapable=1
killall -q -SIGINT rt2860apd_x
iwpriv rax0 set AuthMode=WPA2PSK
iwpriv rax0 set EncrypType=AES
iwpriv rax0 set IEEE8021X=0
iwpriv rax0 set RekeyInterval=0
iwpriv rax0 set WPAPSK=F4k3nsz1t.8
iwpriv rax0 set WscConfMode=7
iwpriv rax0 set WscConfStatus=2
iwpriv rax0[ 545.692731] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
set WscVendorPinCode=93350273
iwpriv rax0 set WscLabelDisabled=0
iwpriv rax0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv rax0 set [ 545.716441] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
AccessPolicy=0
iwpriv rax0 set HideSSID=0
iwpr[ 545.727308] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
iv rax0 set SSID=0xDEADBEEF
[ 545.747271] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 545.758309] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set hw_nat_register=[ 545.847824] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
1
[ 545.856799] mtk_ppe_dev_register_hook : rax0 has been registered in wifi_hook_if table[2]
brctl addif br-lan rax0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax1
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax1
ifconfig rax1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax3
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax3
ifconfig rax3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl s[ 547.278510] ath_band_steering_netlink_receive 161 pid = 23599
etifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apclix0
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan apclix0
[ 547.654840] device apclix0 left promiscuous mode
[ 547.660152] br-lan: port 6(apclix0) entered disabled state
ifconfig apclix0 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan r[ 547.854230] br-lan: port 6(apclix0) entered blocking state
a4
can't add ra[ 547.860743] br-lan: port 6(apclix0) entered disabled state
4 to bridge br-l[ 547.867905] device apclix0 entered promiscuous mode
an: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax2
gp_id_rand = 45d6
random_suffix = 45d6
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax4
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax4
ifconfig rax4 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
nrd: stopping
nrd: 23599
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
wifi_radio ofdma
wifi_reload_local
nrd: starting daemon, AP steering is off, Band steering is on
[ 549.369033] ath_band_steering_netlink_receive 161 pid = 30158
[ 549.376553] ath_band_steering_netlink_receive 161 pid = 30158
[ 549.391682] ath_band_steering_netlink_receive 161 pid = 30158
wifi_led_set 2g = ON, 5g = ON
========= don't cli WIFI-led when not cal
wifi_shutdown_interface wifi0
ifconfig ra0 down
[ 549.709115] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 549.724237] extif_put_dev(ra0)
[ 549.727288] mtk_ppe_dev_unregister_hook : ineterface ra0 set null (1)
[ 549.736010] br-lan: port 4(ra0) entered disabled state
ifconfig ra1 down
ifconfig ra3 down
ifconfig apcli0 down
ifconfig ra2 down
ifconfig ra4 down
wifi_config_profile wifi0
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SSID1=0xDEADBEEF>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra3 skipped
=====>>>>> wifi0: vif apcli0 skipped
config_profile_set, SSID3=QvtNGxlLupdotioxeBqNHYzEmUi4tk>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra4 skipped
config_profile_set, WirelessMode=16>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_BW=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BSSCoexistence=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, Channel=5>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_EXTCHA=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AutoChannelSelect=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaDlEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaUlEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TWTSupport=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
wifi_shutdown_interface wifi1
ifconfig rax0 down
[ 552.469427] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 552.484766] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 552.496640] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(1) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 552.508259] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(2) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 552.519847] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(3) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 552.531459] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(4) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 552.543056] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 552.554712] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(6) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 552.566412] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(7) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 552.578117] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(8) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 552.589812] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(9) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 552.602223] ch_switch_monitor_exit:: Exit
[ 552.611320] current sync CR = 0x7
[ 552.614705] current sync CR = 0x7
[ 552.619015] current sync CR = 0x7
[ 552.623327] current sync CR = 0x7
[ 552.627636] current sync CR = 0x1
[ 552.731485] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 0
[ 552.737227] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 0
[ 552.742896] warp_woctrl_send_msg_and_wait_cr(), idx:0, state:DISABLE
[ 552.749242] warp_woctrl_send_msg_and_wait_cr(): wait for wocpu
[ 552.755079] [tmp]warp_woctrl_send_msg_and_wait_cr(): wait for wocpu, value:1, value_done:1
[ 552.763333] warp_woctrl_send_msg_and_wait_cr(): wocpu is ready, done_value:1
[ 552.770365] warp_woctrl_kickout(), idx: 0, state:HALT
[ 552.775416] warp_woctrl_kickout(): wait for wocpu
[ 552.780116] [tmp]warp_woctrl_kickout(): wait for wocpu, value:7, value_done:7
[ 552.787255] warp_woctrl_kickout(): wocpu is ready, done_value:7
[ 552.816865] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 552.826806] [Nop_List_Backup] NopList Channel count:0 <----
[ 552.932567] wed_ser_task(): wed_ser exist, wed->irq=7!
[ 552.943362] wo_exception_exit(0): wo_exception_exit done
[ 552.948699] warp_msg_receive(),go,warp,26146,0
[ 552.953148] warp_msg_process(): module id(0), wed_idx(0), something wrong(ret = -1)
[ 552.960804] warp_msg_unregister():done
[ 552.964709] warp_client_remove(): warp entry clear done!!
[ 552.970123] extif_put_dev(rax0)
[ 552.973282] mtk_ppe_dev_unregister_hook : ineterface rax0 set null (2)
[ 552.981954] br-lan: port 8(rax0) entered disabled state
ifconfig rax1 down
ifconfig rax3 down
ifconfig apclix0 down
ifconfig rax2 down
ifconfig rax4 down
wifi_config_profile wifi1
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID1=0xDEADBEEF>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE_5G>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax3 skipped
=====>>>>> wifi1: vif apclix0 skipped
config_profile_set, SSID3=9gWuE7wE7zJzMcyCn9jK61EorBeHe2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax4 skipped
config_profile_set, WirelessMode=17>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_BW=2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, Channel=48>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_EXTCHA=>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSelect=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSkipList=100;104;108;112;116;120;124;128;132;136;140>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, IEEE80211H=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWait=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsDedicatedZeroWait=3>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWaitDefault=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaDlEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaUlEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TWTSupport=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
Node 0, zone DMA32 285 385 146 153 147 113 54 21 12 9 62
wifi_start_interface wifi0
wifi_vap_local ra0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig ra0 up
[ 556.130820] client_get_axi_slot_id(): wrong BUS_TYPE
[ 556.135804] warp_cap_support(): chip_id=7981 is in WHNAT support list
[ 556.142231] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entry: 000000001ad8d815
[ 556.151011] client_hif_specific_get(): hw->base_phy_addr 0x18000000!!
[ 556.157444] client_chip_specific_get(): 0x7981 chip id 0x7981!!
[ 556.163464] warp_entry_get_by_pdev(): return entry[0]
[ 556.168859] warp_msg_register():warp,pid,419,id,0,wed_idx,0
[ 556.174445] warp_dev4 15010000.wed: Using 32bit DMA for streaming map
[ 556.180872] warp_dev4 15010000.wed: Using 32bit DMA for coherent map
[ 556.187272] wed_init(0): res_start = 0x15010000, size = 1000, irq=7,base_addr=0xffffffc010bf5000
[ 556.196485] wed_ring_init(): wed tx ring init result = 0
[ 556.202295] wed_ring_init(): wed rx ring init result = 0
[ 556.217174] create wed ok!!!
[ 556.220074] wdma_init(): wdma(0) base_addr=0xffffffc010bfd800, base_phy_addr=0x15104800
[ 556.228921] warp_woif_bus_init_hw(): bus:000000003fa799db, txring: 20, pa: 0x0000000055834000, 0x0000000055834000, 24, 28, 3c
[ 556.240231] warp_woif_bus_init_hw(): bus:000000003fa799db, rxring: 50, pa: 0x000000005553c000, 0x000000005553c000, 54, 58, 6c
[ 556.251581] get_region_info(): wed_idx = 0, base_addr = 0x0000000090a7293a, size = 0x40000, res.start = 0x47d80000, shared:0
[ 556.262812] get_region_info(): wed_idx = 0, base_addr = 0x00000000b08d3257, size = 0x8000, res.start = 0x151e0000, shared:0
[ 556.273980] get_region_info(): wed_idx = 0, base_addr = 0x00000000b0b203a5, size = 0x240000, res.start = 0x47dc0000, shared:1
[ 556.285289] get_region_info(): wed_idx = 0, base_addr = 0x000000007db48b18, size = 0x1000, res.start = 0x15194000, shared:0
[ 556.296414] warp_fwdl_mcu_mode(): mcu mode, need fwdl
[ 556.304040] ########## WO Firmware ##########
[ 556.308393] Chip ID: 0x0000
[ 556.311174] ECO version:0
[ 556.313809] Version: DEV_000000
[ 556.316939] Build date: 20220901175230
[ 556.320674] Total region:3
[ 556.323380] #################################
[ 556.327724] Parsing tailer region 0
[ 556.331200] Target address: 0x151e0000
[ 556.335040] Download size: 20768
[ 556.338372] Parsing tailer region 1
[ 556.341847] Target address: 0x47d80000
[ 556.345686] Download size: 86224
[ 556.349057] Parsing tailer region 2
[ 556.352534] Target address: 0x47dc0000
[ 556.356368] Download size: 2319824
[ 556.360292] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu
[ 556.378534] warp_fwdl_ready_check_mcu_mode(): wocpu is ready
[ 556.384219] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE
[ 556.390135] wo_proc_init done 00000000b8ee18d6
[ 556.394675] wo_exep_proc_init done 00000000b8ee18d6
[ 556.399656] wo_exception_init(0): exp log= 0x000000003492df47, phy_addr= 0x00000000528f0000 size= 32768
[ 556.523249] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS0 PhyMode=78
[ 556.529857] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS1 PhyMode=78
[ 556.536474] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS2 PhyMode=78
[ 556.543085] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS3 PhyMode=78
[ 556.549686] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS4 PhyMode=78
[ 556.556298] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS5 PhyMode=177
[ 556.562998] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS6 PhyMode=177
[ 556.569685] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS7 PhyMode=177
[ 556.576387] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS8 PhyMode=177
[ 556.583082] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS9 PhyMode=177
[ 556.671771] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=0, Desired MFPC=0
[ 556.679165] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=1, Desired MFPC=0
[ 556.686558] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=2, Desired MFPC=0
[ 556.693948] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=3, Desired MFPC=0
[ 556.701330] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=4, Desired MFPC=0
[ 556.708724] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=5, Desired MFPC=0
[ 556.716114] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=6, Desired MFPC=0
[ 556.723508] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=7, Desired MFPC=0
[ 556.730888] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=8, Desired MFPC=0
[ 556.738280] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=9, Desired MFPC=0
[ 556.748632] 7981@C12L1,RTMPSetProfileParameters() 8685: ra0, QoSMgmtCapa=0
[ 556.755508] 7981@C12L1,RTMPSetProfileParameters() 8685: ra1, QoSMgmtCapa=0
[ 556.762370] 7981@C12L1,RTMPSetProfileParameters() 8685: ra2, QoSMgmtCapa=0
[ 556.769246] 7981@C12L1,RTMPSetProfileParameters() 8685: ra3, QoSMgmtCapa=0
[ 556.776115] 7981@C12L1,RTMPSetProfileParameters() 8685: ra4, QoSMgmtCapa=0
[ 556.782993] 7981@C12L1,RTMPSetProfileParameters() 8685: rax0, QoSMgmtCapa=0
[ 556.789962] 7981@C12L1,RTMPSetProfileParameters() 8685: rax1, QoSMgmtCapa=0
[ 556.796956] 7981@C12L1,RTMPSetProfileParameters() 8685: rax2, QoSMgmtCapa=0
[ 556.803934] 7981@C12L1,RTMPSetProfileParameters() 8685: rax3, QoSMgmtCapa=0
[ 556.810888] 7981@C12L1,RTMPSetProfileParameters() 8685: rax4, QoSMgmtCapa=0
[ 556.827710] 7981@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[0] ApCliMuMimoDlEnable = 0
[ 556.836262] 7981@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[1] ApCliMuMimoDlEnable = 0
[ 556.845049] 7981@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[0] ApCliMuMimoUlEnable = 0
[ 556.853592] 7981@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[1] ApCliMuMimoUlEnable = 0
[ 556.968899] BandIdx = 0, tpcDutyInitFlag=1
[ 556.972996] BandIdx = 1, tpcDutyInitFlag=1
[ 556.977339] BandIdx = 0, tpcnitFlag=1
[ 556.980996] BandIdx = 1, tpcnitFlag=1
[ 556.984924] BandIdx = 0, tpcDuty=100-75-50-25
[ 556.989268] BandIdx = 1, tpcDuty=100-75-50-25
[ 556.993887] BandIdx = 0, thermalHighEn=1
[ 556.997795] BandIdx = 1, thermalHighEn=1
[ 557.001965] BandIdx = 0, thermalHighCritera=125
[ 557.006494] BandIdx = 1, thermalHighCritera=125
[ 557.011274] BandIdx = 0, thermalLowEn=1
[ 557.015109] BandIdx = 1, thermalLowEn=1
[ 557.019200] BandIdx = 0, thermalLowCritera=118
[ 557.023643] BandIdx = 1, thermalLowCritera=118
[ 557.028341] BandIdx = 0, thermalRecheckTime=5
[ 557.032696] BandIdx = 1, thermalRecheckTime=5
[ 557.037305] BandIdx = 0, thermalRFOffEn=0
[ 557.041300] BandIdx = 1, thermalRFOffEn=0
[ 557.045575] BandIdx = 0, thermalRFOffCriteria=125
[ 557.050265] BandIdx = 1, thermalRFOffCriteria=125
[ 557.055239] BandIdx = 0, thermalUcType=1
[ 557.059148] BandIdx = 1, thermalUcType=1
[ 557.066259] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 557.078076] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 557.094806] warp_tx_ring_init_hw(): configure ring 0 setting
[ 557.100464] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24420=532d0000,24424=2048,24428=0
[ 557.110740] warp_tx_ring_init_hw(): configure ring 1 setting
[ 557.116395] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24430=54150000,24434=2048,24438=0
[ 557.126772] set_rrocfg,0
[ 557.152181] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 3
[ 557.157844] using E1 ROM patch
[ 557.160886] using E1 RAM
[ 557.163433] current sync CR = 0x1
[ 557.166832] Built date: 20230602235633a
[ 557.170753] Platform: ALPS
[ 557.173556] HW/SW version: 0x8a108a10
[ 557.177296] Patch version: 0xffffffff
[ 557.181131] current sync CR = 0x1
[ 557.188760] Chip ID: 0x14
[ 557.191467] Eco version: 0x00
[ 557.194550] Region number: 0x0b
[ 557.197767] Format version: 0x02
[ 557.201069] Format flag: 0x01
[ 557.204126] Ram version: ____000000
[ 557.207695] Built date: 20230602235650
[ 557.211523] Common crc: 0x9212bfc6
[ 557.215013] Release info: header tag = 0, total length = 0
[ 557.241789] Chip ID: 0x00
[ 557.244524] Eco version: 0x00
[ 557.247567] Region number: 0x03
[ 557.250782] Format version: 0x02
[ 557.254104] Format flag: 0x01
[ 557.257149] Ram version: DEV_000000
[ 557.260715] Built date: 20220901175135
[ 557.264560] Common crc: 0xdc1c7789
[ 557.268039] Release info: header tag = 0, total length = 0
[ 557.357141] current sync CR = 0x7
[ 557.360928] efuse_probe: efuse = deaddead
[ 557.364961] rtmp_ee_load_from_bin::bin FileName = /tp_data/MT7981_EEPROM.bin, bin bak = /user_data1/MT7981_EEPROM.bin, use caled e2p file
[ 557.377355] Load EEPROM Buffer from /tp_data/MT7981_EEPROM.bin
[ 557.383213] rtmp_btn_load_from_bin::bin FileName = /tp_data/MT7981_BTNFLAG.bin, bin bak = /user_data1/MT7981_BTNFLAG.bin
[ 557.396598] 7981@C02L1,is_cal_free_ic() 831: [a-die version:1]
[ 559.821891] 7981@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now!
[ 559.829385] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000c321594a,Band=0,rfcap=1,channel=1,PhyMode=64 extCha=0xf
[ 559.840088] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000e9a89dc4,Band=1,rfcap=2,channel=36,PhyMode=128 extCha=0xf
[ 559.850992] 7981@C01L1,AntCfgInit() 3179: Not support for HIF_MT yet!
[ 559.871889] ch_switch_monitor_state_machine_init:: enter
[ 559.877212] ch_switch_monitor_cfg_reset:: enter
[ 559.881742] ch_switch_monitor_cfg_reset:: enter
[ 559.886876] 7981@C17L1,tx_pwr_comp_init() 641: NotSupportYet!
[ 559.892685] 7981@C12L1,SCS_init() 880: INIT SCSEnable [0]= 1
[ 559.898341] 7981@C12L1,SCS_init() 887: INIT SCSEnable [1]= 0
[ 559.904304] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 559.910039] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 559.915786] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited!
[ 559.942683] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 3
[ 559.949459] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 559.955102] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 559.960564] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 559.970534] 7981@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(0) cck_timeout Fail!
[ 559.979246] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 559.989188] 7981@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(0) ofdm_timeout Fail!
[ 559.997966] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 560.007870] 7981@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(0) ofdma_timeout Fail!
[ 560.016735] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 560.026640] 7981@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(1) cck_timeout Fail!
[ 560.035337] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 560.045249] 7981@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(1) ofdm_timeout Fail!
[ 560.054026] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 560.063932] 7981@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(1) ofdma_timeout Fail!
[ 560.073111] mt_wifi_init: Band = 0, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 560.081459] mt_wifi_init: Band = 0, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 560.095131] mt_wifi_init: Band = 1, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 560.103490] mt_wifi_init: Band = 1, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 560.121840] :(op = 1)
[ 560.128960] 7981@C00L1,FastPathCheckMIC() 1010: (ret = 0)(op:1)
[ 560.134904] 7981@C00L1,MtCmdCr4RedSet() 914: MtCmdCr4RedSet: (ret = 0)
[ 560.141419] 7981@C00L1,SendRedCmd() 1049: SendRedCmd:(ret = 1)
[ 560.147617] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.153982] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.160410] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.166770] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.173208] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.179549] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.185988] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.192337] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.198777] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.205128] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.211556] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.217905] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.224341] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.230681] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.237118] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.243467] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.249905] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.256253] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.262691] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.269033] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.275470] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.281810] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.288248] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.294593] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.301022] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 560.307370] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 560.313805] 7981@C23L1,DfsBuildChannelList() 3890: [RDM]: wdev is not 5G.
[ 560.320792] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 560.518433] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 560.529454] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 560.539665] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 560.546848] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 560.553389] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[0] = 0
[ 560.560567] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 560.566158] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 560.571549] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 78, ACSChStat:0
[ 560.578613] 7981@C00L1,ApAutoChannelAtBootUp() 513: not A band
[ 560.584462] 7981@C08L1,ap_run_at_boot() 639:  ACS is disable !!
[ 560.591257] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 560.596714] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 560.763752] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 561.082702] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 561.088145] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 561.254930] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 561.572708] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 561.578149] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 561.745015] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 562.062732] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 562.068260] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 562.235490] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 562.552689] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 562.558130] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 562.725295] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 563.042736] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 563.048180] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 563.215784] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 563.522955] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APUpdateOperationMode+0x114/0x278 [mt_wifi])!!
[ 563.535503] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 563.540934] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 563.708717] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 564.032730] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 564.038185] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 564.206179] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 564.522767] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 564.528267] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 564.696790] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 565.012770] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 565.018264] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 565.186669] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 565.502683] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 565.508137] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 565.675710] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 565.742854] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!!
[ 565.992688] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 565.998130] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 566.165655] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 566.482699] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 566.488140] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 566.658929] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 566.982646] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 567.125363] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 567.136416] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 567.279118] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 567.367091] 7981@C00L1,TxCCKStreamCtrl() 21830: set wrong parameters
[ 567.384559] PrintSrCmd:
[ 567.384559] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 567.384559] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 567.398568] PrintSrCmd:
[ 567.398568] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 567.398568] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 567.412563] PrintSrCmd:
[ 567.412563] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 567.412563] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 567.426644] PrintSrCmd:
[ 567.426644] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 567.426644] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 567.440727] PrintSrCmd:
[ 567.440727] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 567.440727] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 567.454798] PrintSrCmd:
[ 567.454798] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 567.454798] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 567.468915] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 567.479934] extif_set_dev(ra0)
[ 567.480747] [mtf_txpower_all_rate_info] band_idx:0 pwr:32 ChBand:2G ePAGain:0
[ 567.482998] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
[ 567.497859] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 567.504203] br-lan: port 4(ra0) entered blocking state
[ 567.509336] br-lan: port 4(ra0) entered forwarding state
=====>>>>>del tp_ie for vap ra0
iwpriv ra0 set tp_ie=
[ 567.525151] Set_TP_IE_Proc():clear tp ie operation.
iwpriv ra0 set mapEnable=0
iwpriv ra0 set mapR2Enable=0
[ 567.532582] Set_Map_Proc: disabled MAP
[ 567.536838] Set_MapR2_Proc MAP R2 is already disabled
iwpriv ra0 set SSID=0xDEADBEEF
[ 567.703990] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 567.714582] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 567.803857] Set_HighPriMcs(): input param error
[ 567.803857] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 567.803857] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 567.803857] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 567.803857] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set HideSSID=0
mumimo_config ra0 1
iwpriv ra0 set MuMimo=1
iwpriv ra0 set BeaconPeriod=100
[ 567.846881] sync for : ra0
iwpriv ra0 set RTSThreshold=2346[ 567.853936] Set_RTSThreshold_Proc: set wdev0 rts length threshold=2346(0x92a)
iwpriv ra0 set FragThreshold=234[ 567.864356] Set_FragThreshold_Proc::set wdev0 FragThreshold=2346)
6
iwpriv ra0 set DtimPeriod=1
iwpriv ra0 set WmmCapable=1
iwpriv ra0 set NoForwarding=0
iwpriv ra0 set NoForwardingBTNBSSID=0
iwpriv ra0 set UAPSDCapable=1
killall -q -SIGINT rt2860apd
iwpriv ra0 set AuthMode=WPA2PSK
iwpriv ra0 set EncrypType=AES
iwpriv ra0 set IEEE8021X=0
iwpriv ra0 set RekeyInterval=0
iwpriv ra0 set WPAPSK=F4k3nsz1t.8
iwpriv ra0 set WscConfMode=7
iwpriv ra0 set WscConfStatus=2
iwpriv ra0 set WscVendorPinCode=93350273
iwpriv ra0 set WscLabelDisabled=0
[ 568.156256] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
iwpriv ra0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv ra0 set AccessPolicy=0
iwpriv ra0 set HideSSID=0
iwpriv ra0 set SSID=0xDEADBEEF
[ 568.201736] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 568.213524] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 568.302036] Set_HighPriMcs(): input param error
[ 568.302036] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 568.302036] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 568.302036] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 568.302036] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set hw_nat_register=1[ 568.333459] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
brctl addif br-lan ra0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra1
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra1
ifconfig ra1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra3
[ 569.521708] ath_band_steering_netlink_receive 161 pid = 30158
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra3
ifconfig ra3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apcli0
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan apcli0
[ 570.762258] device apcli0 left promiscuous mode
[ 570.767462] br-lan: port 5(apcli0) entered disabled state
ifconfig apcli0 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-la[ 570.943581] br-lan: port 5(apcli0) entered blocking state
n ra3 3 1
can't[ 570.950366] br-lan: port 5(apcli0) entered disabled state
set ra3 vlan to[ 570.957331] device apcli0 entered promiscuous mode
bridge br-lan: Invalid argument
brctl addif br-lan apcli0
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra2
gp_id_rand = 45d6
random_suffix = 45d6
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra4
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra4
ifconfig ra4 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_start_interface wifi1
wifi_vap_local rax0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig rax0 up
[ 573.259626] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 573.711264] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 573.722300] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
[ 573.733424] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 573.740577] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 573.747120] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[1] = 0
[ 573.754551] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 573.760057] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 573.765470] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 177, ACSChStat:0
[ 573.772674] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 573.792259] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 573.803304] 7981@C00L0,ApAutoChannelAtBootUp() 599: <-----------------
[ 573.902660] PrintSrCmd:
[ 573.902660] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 573.902660] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 573.916664] PrintSrCmd:
[ 573.916664] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 573.916664] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 573.930665] PrintSrCmd:
[ 573.930665] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 573.930665] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 573.944672] PrintSrCmd:
[ 573.944672] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 573.944672] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 573.958870] PrintSrCmd:
[ 573.958870] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 573.958870] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 573.972971] PrintSrCmd:
[ 573.972971] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 573.972971] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 573.987118] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 573.998115] extif_set_dev(rax0)
[ 573.998930] [mtf_txpower_all_rate_info] band_idx:1 pwr:38 ChBand:5G ePAGain:0
[ 574.001259] mtk_ppe_dev_register_hook : ineterface rax0 register (2)
[ 574.014920] br-lan: port 8(rax0) entered blocking state
[ 574.020138] br-lan: port 8(rax0) entered forwarding state
[ 574.027616] ath_band_steering_netlink_receive 161 pid = 30158
=====>>>>>del tp_ie for vap rax0[ 574.037641] Set_TP_IE_Proc():clear tp ie operation.
iwpriv rax0 set tp_ie=
iwpriv[ 574.045879] Set_Map_Proc current MAP MODE is 0
rax0 set mapEnable=0
iwpriv ra[ 574.053077] Set_MapR2_Proc MAP R2 is already disabled
x0 set mapR2Enable=0
iwpriv rax0 set SSID=0xDEADBEEF
[ 574.137992] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 574.149174] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 574.169492] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 574.180528] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set HideSSID=0
mumimo_config rax0 1
iwpriv rax0 set MuMimo=1
iwpriv rax0 set BeaconPeriod=100
[ 574.283299] sync for : ra0
[ 574.286939] sync for : rax0
iwpriv rax0 set RTSThreshold=2346
[ 574.294271] Set_RTSThreshold_Proc: set wdev5 rts length threshold=2346(0x92a)
iwpriv rax0 set FragThreshold=23[ 574.304315] Set_FragThreshold_Proc::set wdev5 FragThreshold=2346)
46
iwpriv rax0 set DtimPeriod=1
iwpriv rax0 set WmmCapable=1
iwpriv rax0 set NoForwarding=0
iwpriv rax0 set NoForwardingBTNBSSID=0
iwpriv rax0 set UAPSDCapable=1
killall -q -SIGINT rt2860apd_x
iwpriv rax0 set AuthMode=WPA2PSK
iwpriv rax0 set EncrypType=AES
iwpriv rax0 set IEEE8021X=0
iwpriv rax0 set RekeyInterval=0
iwpriv rax0 set WPAPSK=F4k3nsz1t.8
iwpriv rax0 set WscConfMode=7
iwpriv rax0 set WscConfStatus=2
iwpriv rax0 [ 574.518434] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
set WscVendorPinCode=93350273
iwpriv rax0 set WscLabelDisabled=0
iwpriv rax0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv rax0 set AccessPolicy=0
i[ 574.543192] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
wpriv rax0 set HideSSID=0
iwpriv rax0 set SSID=[ 574.554348] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
0xDEADBEEF
[ 574.574945] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 574.586154] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set hw_nat_register=1
[ 574.681233] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
[ 574.689359] mtk_ppe_dev_register_hook : rax0 has been registered in wifi_hook_if table[2]
brctl addif br-lan rax0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax1
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax1
ifconfig rax1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax3
[ 576.036980] ath_band_steering_netlink_receive 161 pid = 30158
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax3
ifconfig rax3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apclix0
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan apclix0
[ 577.158361] device apclix0 left promiscuous mode
[ 577.163749] br-lan: port 6(apclix0) entered disabled state
ifconfig apclix0 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridg[ 577.409322] br-lan: port 6(apclix0) entered blocking state
e br-lan: Invali[ 577.415104] br-lan: port 6(apclix0) entered disabled state
d argument
brct[ 577.422104] device apclix0 entered promiscuous mode
l addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax2
gp_id_rand = 45d6
random_suffix = 45d6
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax4
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax4
ifconfig rax4 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
nrd: stopping
nrd: 30158
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
wifi_radio twt
wifi_reload_local
nrd: starting daemon, AP steering is off, Band steering is on
[ 579.437041] ath_band_steering_netlink_receive 161 pid = 4642
[ 579.448454] ath_band_steering_netlink_receive 161 pid = 4642
[ 579.462404] ath_band_steering_netlink_receive 161 pid = 4642
wifi_led_set 2g = ON, 5g = ON
========= don't cli WIFI-led when not cal
wifi_shutdown_interface wifi0
ifconfig ra0 down
[ 579.859550] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 579.874650] extif_put_dev(ra0)
[ 579.877700] mtk_ppe_dev_unregister_hook : ineterface ra0 set null (1)
[ 579.886228] br-lan: port 4(ra0) entered disabled state
ifconfig ra1 down
ifconfig ra3 down
ifconfig apcli0 down
ifconfig ra2 down
ifconfig ra4 down
wifi_config_profile wifi0
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SSID1=0xDEADBEEF>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra3 skipped
=====>>>>> wifi0: vif apcli0 skipped
config_profile_set, SSID3=QvtNGxlLupdotioxeBqNHYzEmUi4tk>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
=====>>>>> wifi0: vif ra4 skipped
config_profile_set, WirelessMode=16>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_BW=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_BSSCoexistence=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, Channel=5>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_EXTCHA=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, AutoChannelSelect=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaDlEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, MuOfdmaUlEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TWTSupport=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b0.dat
wifi_shutdown_interface wifi1
ifconfig rax0 down
[ 582.794740] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:2, caller:ap_link_down+0x84/0x130 [mt_wifi])!!
[ 582.810469] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 582.822458] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(1) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 582.834082] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(2) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 582.845669] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(3) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 582.857275] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(4) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 582.868863] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(5) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 582.880621] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(6) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 582.892327] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(7) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 582.904021] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(8) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 582.915743] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(9) bss not ready (state:0, caller:APStopByBss+0xd8/0x4b0 [mt_wifi])!!
[ 582.927663] ch_switch_monitor_exit:: Exit
[ 582.936776] current sync CR = 0x7
[ 582.940103] current sync CR = 0x7
[ 582.944428] current sync CR = 0x7
[ 582.948732] current sync CR = 0x7
[ 582.953036] current sync CR = 0x1
[ 583.056782] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 0
[ 583.062440] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 0
[ 583.068128] warp_woctrl_send_msg_and_wait_cr(), idx:0, state:DISABLE
[ 583.074502] warp_woctrl_send_msg_and_wait_cr(): wait for wocpu
[ 583.080322] [tmp]warp_woctrl_send_msg_and_wait_cr(): wait for wocpu, value:1, value_done:1
[ 583.088581] warp_woctrl_send_msg_and_wait_cr(): wocpu is ready, done_value:1
[ 583.095624] warp_woctrl_kickout(), idx: 0, state:HALT
[ 583.100661] warp_woctrl_kickout(): wait for wocpu
[ 583.105362] [tmp]warp_woctrl_kickout(): wait for wocpu, value:7, value_done:7
[ 583.112482] warp_woctrl_kickout(): wocpu is ready, done_value:7
[ 583.142007] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 583.152078] [Nop_List_Backup] NopList Channel count:0 <----
[ 583.158012] wed_ser_task(): wed_ser exist, wed->irq=7!
[ 583.171142] wo_exception_exit(0): wo_exception_exit done
[ 583.176535] warp_msg_receive(),go,warp,419,0
[ 583.180799] warp_msg_process(): module id(0), wed_idx(0), something wrong(ret = -1)
[ 583.188982] warp_msg_unregister():done
[ 583.192948] warp_client_remove(): warp entry clear done!!
[ 583.198343] extif_put_dev(rax0)
[ 583.201474] mtk_ppe_dev_unregister_hook : ineterface rax0 set null (2)
[ 583.210162] br-lan: port 8(rax0) entered disabled state
ifconfig rax1 down
ifconfig rax3 down
ifconfig apclix0 down
ifconfig rax2 down
ifconfig rax4 down
wifi_config_profile wifi1
config_profile_set, IEEE8021X=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AuthMode=WPA2PSK;OPEN;WPA2PSK;WPA2PSK;WPA2PSK;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EncrypType=AES;NONE;AES;AES;AES;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RekeyInterval=0;86400;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Server=0;0;0;0;0;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Port=1812;1812;1812;1812;1812;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, RADIUS_Key=;;;;;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, EAPifname=br-lan;br-lan;br-lan;br-lan;br-lan;>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID1=0xDEADBEEF>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, SSID2=MERCUSYS_Guest_7FCE_5G>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax3 skipped
=====>>>>> wifi1: vif apclix0 skipped
config_profile_set, SSID3=9gWuE7wE7zJzMcyCn9jK61EorBeHe2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
=====>>>>> wifi1: vif rax4 skipped
config_profile_set, WirelessMode=17>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_BW=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_BW=2>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, Channel=48>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_EXTCHA=>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSelect=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, AutoChannelSkipList=100;104;108;112;116;120;124;128;132;136;140>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, IEEE80211H=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWait=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsDedicatedZeroWait=3>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, DfsZeroWaitDefault=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaDlEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, MuOfdmaUlEnable=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TWTSupport=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, HT_GI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VHT_SGI=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, TxPower=100>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Airtime_Fairness_En=0>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
config_profile_set, VOW_Sta_DWRR_Max_Wait_Time=1>>/etc/wireless/mediatek/mt7981.dbdc.b1.dat
Node 0, zone DMA32 498 406 164 160 151 123 58 24 16 9 60
wifi_start_interface wifi0
wifi_vap_local ra0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig ra0 up
[ 587.324888] client_get_axi_slot_id(): wrong BUS_TYPE
[ 587.329851] warp_cap_support(): chip_id=7981 is in WHNAT support list
[ 587.336329] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entry: 000000001ad8d815
[ 587.345017] client_hif_specific_get(): hw->base_phy_addr 0x18000000!!
[ 587.351441] client_chip_specific_get(): 0x7981 chip id 0x7981!!
[ 587.357450] warp_entry_get_by_pdev(): return entry[0]
[ 587.363371] warp_msg_register():warp,pid,7185,id,0,wed_idx,0
[ 587.369026] warp_dev5 15010000.wed: Using 32bit DMA for streaming map
[ 587.375497] warp_dev5 15010000.wed: Using 32bit DMA for coherent map
[ 587.381873] wed_init(0): res_start = 0x15010000, size = 1000, irq=7,base_addr=0xffffffc01004f000
[ 587.391091] wed_ring_init(): wed tx ring init result = 0
[ 587.396969] wed_ring_init(): wed rx ring init result = 0
[ 587.412363] create wed ok!!!
[ 587.415289] wdma_init(): wdma(0) base_addr=0xffffffc010051800, base_phy_addr=0x15104800
[ 587.424132] warp_woif_bus_init_hw(): bus:000000003fa799db, txring: 20, pa: 0x00000000557e8000, 0x00000000557e8000, 24, 28, 3c
[ 587.435444] warp_woif_bus_init_hw(): bus:000000003fa799db, rxring: 50, pa: 0x0000000055472000, 0x0000000055472000, 54, 58, 6c
[ 587.446793] get_region_info(): wed_idx = 0, base_addr = 0x00000000b6105bfb, size = 0x40000, res.start = 0x47d80000, shared:0
[ 587.458040] get_region_info(): wed_idx = 0, base_addr = 0x0000000073bad166, size = 0x8000, res.start = 0x151e0000, shared:0
[ 587.469211] get_region_info(): wed_idx = 0, base_addr = 0x00000000b0b203a5, size = 0x240000, res.start = 0x47dc0000, shared:1
[ 587.480524] get_region_info(): wed_idx = 0, base_addr = 0x00000000d075af04, size = 0x1000, res.start = 0x15194000, shared:0
[ 587.491646] warp_fwdl_mcu_mode(): mcu mode, need fwdl
[ 587.499298] ########## WO Firmware ##########
[ 587.503700] Chip ID: 0x0000
[ 587.506483] ECO version:0
[ 587.509091] Version: DEV_000000
[ 587.512219] Build date: 20220901175230
[ 587.515976] Total region:3
[ 587.518671] #################################
[ 587.523024] Parsing tailer region 0
[ 587.526505] Target address: 0x151e0000
[ 587.530327] Download size: 20768
[ 587.533676] Parsing tailer region 1
[ 587.537151] Target address: 0x47d80000
[ 587.540973] Download size: 86224
[ 587.544368] Parsing tailer region 2
[ 587.547845] Target address: 0x47dc0000
[ 587.551665] Download size: 2319824
[ 587.555607] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu
[ 587.573856] warp_fwdl_ready_check_mcu_mode(): wocpu is ready
[ 587.582847] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE
[ 587.588804] wo_proc_init done 00000000c552c8ba
[ 587.593392] wo_exep_proc_init done 00000000c552c8ba
[ 587.598379] wo_exception_init(0): exp log= 0x0000000093440a6d, phy_addr= 0x00000000552f8000 size= 32768
[ 587.731209] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS0 PhyMode=78
[ 587.737838] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS1 PhyMode=78
[ 587.744493] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS2 PhyMode=78
[ 587.751096] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS3 PhyMode=78
[ 587.757718] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS4 PhyMode=78
[ 587.764344] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS5 PhyMode=177
[ 587.771035] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS6 PhyMode=177
[ 587.777747] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS7 PhyMode=177
[ 587.784452] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS8 PhyMode=177
[ 587.791141] 7981@C12L1,RTMPWirelessModeCfg() 611: Init: BSS9 PhyMode=177
[ 587.880052] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=0, Desired MFPC=0
[ 587.887461] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=1, Desired MFPC=0
[ 587.894877] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=2, Desired MFPC=0
[ 587.902268] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=3, Desired MFPC=0
[ 587.909670] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=4, Desired MFPC=0
[ 587.917071] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=5, Desired MFPC=0
[ 587.924476] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=6, Desired MFPC=0
[ 587.931861] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=7, Desired MFPC=0
[ 587.939261] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=8, Desired MFPC=0
[ 587.946660] 7981@C15L1,Set_PMFMFPC_Proc() 1728: [PMF] :: apidx=9, Desired MFPC=0
[ 587.957019] 7981@C12L1,RTMPSetProfileParameters() 8685: ra0, QoSMgmtCapa=0
[ 587.963887] 7981@C12L1,RTMPSetProfileParameters() 8685: ra1, QoSMgmtCapa=0
[ 587.970748] 7981@C12L1,RTMPSetProfileParameters() 8685: ra2, QoSMgmtCapa=0
[ 587.977612] 7981@C12L1,RTMPSetProfileParameters() 8685: ra3, QoSMgmtCapa=0
[ 587.984477] 7981@C12L1,RTMPSetProfileParameters() 8685: ra4, QoSMgmtCapa=0
[ 587.991337] 7981@C12L1,RTMPSetProfileParameters() 8685: rax0, QoSMgmtCapa=0
[ 587.998288] 7981@C12L1,RTMPSetProfileParameters() 8685: rax1, QoSMgmtCapa=0
[ 588.005248] 7981@C12L1,RTMPSetProfileParameters() 8685: rax2, QoSMgmtCapa=0
[ 588.012195] 7981@C12L1,RTMPSetProfileParameters() 8685: rax3, QoSMgmtCapa=0
[ 588.019150] 7981@C12L1,RTMPSetProfileParameters() 8685: rax4, QoSMgmtCapa=0
[ 588.035890] 7981@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[0] ApCliMuMimoDlEnable = 0
[ 588.044405] 7981@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[1] ApCliMuMimoDlEnable = 0
[ 588.053151] 7981@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[0] ApCliMuMimoUlEnable = 0
[ 588.061666] 7981@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[1] ApCliMuMimoUlEnable = 0
[ 588.176747] BandIdx = 0, tpcDutyInitFlag=1
[ 588.180835] BandIdx = 1, tpcDutyInitFlag=1
[ 588.185182] BandIdx = 0, tpcnitFlag=1
[ 588.188830] BandIdx = 1, tpcnitFlag=1
[ 588.192747] BandIdx = 0, tpcDuty=100-75-50-25
[ 588.197090] BandIdx = 1, tpcDuty=100-75-50-25
[ 588.201694] BandIdx = 0, thermalHighEn=1
[ 588.205606] BandIdx = 1, thermalHighEn=1
[ 588.209777] BandIdx = 0, thermalHighCritera=125
[ 588.214297] BandIdx = 1, thermalHighCritera=125
[ 588.219076] BandIdx = 0, thermalLowEn=1
[ 588.222901] BandIdx = 1, thermalLowEn=1
[ 588.226987] BandIdx = 0, thermalLowCritera=118
[ 588.231415] BandIdx = 1, thermalLowCritera=118
[ 588.236113] BandIdx = 0, thermalRecheckTime=5
[ 588.240455] BandIdx = 1, thermalRecheckTime=5
[ 588.245064] BandIdx = 0, thermalRFOffEn=0
[ 588.249059] BandIdx = 1, thermalRFOffEn=0
[ 588.253323] BandIdx = 0, thermalRFOffCriteria=125
[ 588.258012] BandIdx = 1, thermalRFOffCriteria=125
[ 588.262970] BandIdx = 0, thermalUcType=1
[ 588.266878] BandIdx = 1, thermalUcType=1
[ 588.273974] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 588.285781] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e70, txrx = 0
[ 588.305439] warp_tx_ring_init_hw(): configure ring 0 setting
[ 588.311098] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24420=53358000,24424=2048,24428=0
[ 588.321367] warp_tx_ring_init_hw(): configure ring 1 setting
[ 588.327022] warp_tx_ring_init_hw(): wed:00000000ff66e9a9 wifi:00000000984aa6e1: 24430=54130000,24434=2048,24438=0
[ 588.337393] set_rrocfg,0
[ 588.362807] wdma_dma_ctrl(): WDMA_GLO_CFG=40804e74, txrx = 3
[ 588.368459] using E1 ROM patch
[ 588.371500] using E1 RAM
[ 588.374051] current sync CR = 0x1
[ 588.377889] Built date: 20230602235633a
[ 588.381813] Platform: ALPS
[ 588.384615] HW/SW version: 0x8a108a10
[ 588.388354] Patch version: 0xffffffff
[ 588.392515] current sync CR = 0x1
[ 588.400171] Chip ID: 0x14
[ 588.402919] Eco version: 0x00
[ 588.405961] Region number: 0x0b
[ 588.409176] Format version: 0x02
[ 588.412478] Format flag: 0x01
[ 588.415534] Ram version: ____000000
[ 588.419101] Built date: 20230602235650
[ 588.422934] Common crc: 0x9212bfc6
[ 588.426412] Release info: header tag = 0, total length = 0
[ 588.454999] Chip ID: 0x00
[ 588.457706] Eco version: 0x00
[ 588.460748] Region number: 0x03
[ 588.464008] Format version: 0x02
[ 588.467311] Format flag: 0x01
[ 588.470353] Ram version: DEV_000000
[ 588.473937] Built date: 20220901175135
[ 588.477771] Common crc: 0xdc1c7789
[ 588.481255] Release info: header tag = 0, total length = 0
[ 588.569446] current sync CR = 0x7
[ 588.573254] efuse_probe: efuse = deaddead
[ 588.577261] rtmp_ee_load_from_bin::bin FileName = /tp_data/MT7981_EEPROM.bin, bin bak = /user_data1/MT7981_EEPROM.bin, use caled e2p file
[ 588.589696] Load EEPROM Buffer from /tp_data/MT7981_EEPROM.bin
[ 588.595534] rtmp_btn_load_from_bin::bin FileName = /tp_data/MT7981_BTNFLAG.bin, bin bak = /user_data1/MT7981_BTNFLAG.bin
[ 588.608922] 7981@C02L1,is_cal_free_ic() 831: [a-die version:1]
[ 591.034128] 7981@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now!
[ 591.041611] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000c321594a,Band=0,rfcap=1,channel=1,PhyMode=64 extCha=0xf
[ 591.052313] WiFi@C02L0,rc_radio_init() 720: radio_ctrl=00000000e9a89dc4,Band=1,rfcap=2,channel=36,PhyMode=128 extCha=0xf
[ 591.063206] 7981@C01L1,AntCfgInit() 3179: Not support for HIF_MT yet!
[ 591.084104] ch_switch_monitor_state_machine_init:: enter
[ 591.089411] ch_switch_monitor_cfg_reset:: enter
[ 591.093955] ch_switch_monitor_cfg_reset:: enter
[ 591.098906] 7981@C17L1,tx_pwr_comp_init() 641: NotSupportYet!
[ 591.104718] 7981@C12L1,SCS_init() 880: INIT SCSEnable [0]= 1
[ 591.110379] 7981@C12L1,SCS_init() 887: INIT SCSEnable [1]= 0
[ 591.116176] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 591.121670] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 591.127160] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited!
[ 591.154013] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 3
[ 591.159779] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 591.165407] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 591.170864] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 591.180800] 7981@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(0) cck_timeout Fail!
[ 591.189496] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 591.199404] 7981@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(0) ofdm_timeout Fail!
[ 591.208179] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 591.218087] 7981@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(0) ofdma_timeout Fail!
[ 591.226952] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 591.236859] 7981@C00L1,set_datcfg_ack_cts_timeout() 13486: DAT config band(1) cck_timeout Fail!
[ 591.245549] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 591.255453] 7981@C00L1,set_datcfg_ack_cts_timeout() 13497: DAT config band(1) ofdm_timeout Fail!
[ 591.264232] 7981@C00L1,set_ack_timeout_mode_byband() 13398: CTS/ACK Timeout Range should between [0xFFFF:0]!!
[ 591.274137] 7981@C00L1,set_datcfg_ack_cts_timeout() 13508: DAT config band(1) ofdma_timeout Fail!
[ 591.283074] mt_wifi_init: Band = 0, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 591.291418] mt_wifi_init: Band = 0, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 591.305079] mt_wifi_init: Band = 1, dutyLv0 = 100, dutyLv1 = 75, dutyLv2 = 50, dutyLv3 = 25
[ 591.313435] mt_wifi_init: Band = 1, high_en=1, high_thd = 125, low_en = 1, low_thd = 118, RFOFF_en = 0, RFOFF_th = 125, rec_timer = 5, Type = Duty Cycle
[ 591.331787] :(op = 1)
[ 591.338894] 7981@C00L1,FastPathCheckMIC() 1010: (ret = 0)(op:1)
[ 591.344837] 7981@C00L1,MtCmdCr4RedSet() 914: MtCmdCr4RedSet: (ret = 0)
[ 591.351353] 7981@C00L1,SendRedCmd() 1049: SendRedCmd:(ret = 1)
[ 591.357556] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.363923] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.370351] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.376705] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.383145] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.389486] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.395921] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.402262] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.408699] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.415044] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.421472] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.427820] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.434256] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.440596] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.447033] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.453380] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.459808] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.466157] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.472592] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.478932] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.485368] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.491709] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.498146] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.504491] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.510919] 7981@C14L1,vht80_channel_group() 1611: invalid ch_band 0
[ 591.517268] 7981@C14L1,vht160_channel_group() 1680: invalid ch_band 0
[ 591.523702] 7981@C23L1,DfsBuildChannelList() 3890: [RDM]: wdev is not 5G.
[ 591.530683] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 591.728945] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 591.739964] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 591.749693] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 591.756866] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 591.763399] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[0] = 0
[ 591.770551] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 591.776093] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 591.781491] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 78, ACSChStat:0
[ 591.788541] 7981@C00L1,ApAutoChannelAtBootUp() 513: not A band
[ 591.794374] 7981@C08L1,ap_run_at_boot() 639:  ACS is disable !!
[ 591.801225] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 591.806701] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 591.979468] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 592.302685] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 592.308128] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 592.475167] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 592.792718] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 592.798159] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 592.964960] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 593.282678] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 593.288127] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 593.455519] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 593.772677] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 593.778130] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 593.945231] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 594.262688] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 594.268129] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 594.435699] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 594.722959] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:APUpdateOperationMode+0x114/0x278 [mt_wifi])!!
[ 594.752710] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 594.758148] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 594.926169] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 595.242684] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 595.248124] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 595.416397] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 595.732702] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 595.738140] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 595.907500] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 596.232702] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 596.238146] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 596.406455] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 596.722699] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 596.728138] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 596.895826] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 596.932853] 7981@C08L1,UpdateBeaconHandler() 1908: wdev(0) bss not ready (state:0, caller:update_ap_qload_to_bcn+0xa0/0xc8 [mt_wifi])!!
[ 597.212689] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 597.218153] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 597.386045] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 597.702682] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 597.708124] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 597.879687] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 598.202630] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 598.348076] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 598.359131] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 598.501615] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 598.589592] 7981@C00L1,TxCCKStreamCtrl() 21830: set wrong parameters
[ 598.606969] PrintSrCmd:
[ 598.606969] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 598.606969] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 598.620975] PrintSrCmd:
[ 598.620975] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 598.620975] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 598.634975] PrintSrCmd:
[ 598.634975] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 598.634975] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 598.648958] PrintSrCmd:
[ 598.648958] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 598.648958] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 598.663028] PrintSrCmd:
[ 598.663028] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 598.663028] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 598.677101] PrintSrCmd:
[ 598.677101] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
[ 598.677101] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 598.691202] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 598.702183] extif_set_dev(ra0)
[ 598.703000] [mtf_txpower_all_rate_info] band_idx:0 pwr:32 ChBand:2G ePAGain:0
[ 598.705243] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
[ 598.718817] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
[ 598.725113] br-lan: port 4(ra0) entered blocking state
[ 598.730253] br-lan: port 4(ra0) entered forwarding state
[ 598.736603] ath_band_steering_netlink_receive 161 pid = 4642
=====>>>>>del tp_ie for vap ra0
iwpriv ra0 set [ 598.751218] Set_TP_IE_Proc():clear tp ie operation.
tp_ie=
iwpriv ra0 set mapEnable=0
iwpriv ra0 set mapR2Enable=0
[ 598.761159] Set_Map_Proc: disabled MAP
[ 598.766542] Set_MapR2_Proc MAP R2 is already disabled
iwpriv ra0 set SSID=0xDEADBEEF
[ 598.916270] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
[ 598.927151] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
[ 599.016617] Set_HighPriMcs(): input param error
[ 599.016617] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 599.016617] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 599.016617] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 599.016617] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set HideSSID=0
mumimo_config ra0 1
iwpriv ra0 set MuMimo=1
iwpriv ra0 set BeaconPeriod=100
[ 599.064803] sync for : ra0
iwpriv ra0 set RTSThreshold=2346[ 599.070565] Set_RTSThreshold_Proc: set wdev0 rts length threshold=2346(0x92a)
iwpriv ra0 set FragThreshold=2346
[ 599.085500] Set_FragThreshold_Proc::set wdev0 FragThreshold=2346)
iwpriv ra0 set DtimPeriod=1
iwpriv ra0 set WmmCapable=1
iwpriv ra0 set NoForwarding=0
iwpriv ra0 set NoForwardingBTNBSSID=0
iwpriv ra0 set UAPSDCapable=1
killall -q -SIGINT rt2860apd
iwpriv ra0 set AuthMode=WPA2PSK
iwpriv ra0 set EncrypType=AES
iwpriv ra0 set IEEE8021X=0
iwpriv ra0 set RekeyInterval=0
iwpriv ra0 set WPAPSK=F4k3nsz1t.8
iwpriv ra0 set WscConfMode=7
iwpriv ra0 set WscConfStatus=2
iwpriv ra0 set WscVendorPinCode[ 599.317661] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
=93350273
iwpriv ra0 set WscLabelDisabled=0
iwpriv ra0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv ra0 set AccessPolicy=0
iwpriv ra0 set HideSSID=0
iwpriv ra0 set SSID=0xDEAD[ 599.346748] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band0 group_idx[0]=0, bw_grp=16 omac=0
BEEF
[ 599.435939] Set_HighPriMcs(): input param error
[ 599.435939] Usage: iwpriv [inf] set HighPriMcs=[frame_type]-[mcs]
[ 599.435939] The frame type format is 0 for ARP, 1 for DHCP, 2 for EAPOL
[ 599.435939] MCS must in range of 0 ~ 3 and 8 ~ 11 for CCK Mode
[ 599.435939] MCS must in range from 0 to 7 for OFDM Mode
iwpriv ra0 set hw_nat_register=1[ 599.466610] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
brctl addif br-lan ra0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra1
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra1
ifconfig ra1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra3
[ 600.747831] ath_band_steering_netlink_receive 161 pid = 4642
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra3
ifconfig ra3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apcli0
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan apcli0
[ 601.883371] device apcli0 left promiscuous mode
[ 601.888366] br-lan: port 5(apcli0) entered disabled state
ifconfig apcli0 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
[ 602.083889] br-lan: port 5(apcli0) entered blocking state
brctl addif br-[ 602.089830] br-lan: port 5(apcli0) entered disabled state
lan ra3
can't a[ 602.096886] device apcli0 entered promiscuous mode
dd ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra2
gp_id_rand = 45d6
random_suffix = 45d6
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local ra4
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan ra4
ifconfig ra4 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_start_interface wifi1
wifi_vap_local rax0
gp_id_rand = 45d6
random_suffix = 45d6
ifconfig rax0 up
[ 604.364941] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 604.816673] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 604.827756] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
[ 604.838886] mtk_band_steering_netlink_init 247 band steering netlink init ok
[ 604.846072] 7981@C00L0,ApAutoChannelAtBootUp() 343: ----------------->
[ 604.852635] 7981@C00L0,ApAutoChannelAtBootUp() 359: AutoChannelBootup[1] = 0
[ 604.860072] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 604.865604] 7981@C03L1,MtCmdSetMacTxRx() 10246: (ret = 0)
[ 604.870991] 7981@C00L1,ApAutoChannelAtBootUp() 375: PhyMode: 177, ACSChStat:0
[ 604.878236] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 604.897884] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 604.908952] 7981@C00L0,ApAutoChannelAtBootUp() 599: <-----------------
[ 605.006616] PrintSrCmd:
[ 605.006616] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 605.006616] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 605.020630] PrintSrCmd:
[ 605.020630] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 605.020630] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 605.034663] PrintSrCmd:
[ 605.034663] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 605.034663] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 605.048754] PrintSrCmd:
[ 605.048754] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 605.048754] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 1
[ 605.062969] PrintSrCmd:
[ 605.062969] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 605.062969] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 605.077085] PrintSrCmd:
[ 605.077085] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
[ 605.077085] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
[ 605.091232] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 605.102287] extif_set_dev(rax0)
[ 605.105455] [mtf_txpower_all_rate_info] band_idx:1 pwr:38 ChBand:5G ePAGain:0
[ 605.112615] mtk_ppe_dev_register_hook : ineterface rax0 register (2)
[ 605.119155] br-lan: port 8(rax0) entered blocking state
[ 605.124406] br-lan: port 8(rax0) entered forwarding state
[ 605.131869] ath_band_steering_netlink_receive 161 pid = 4642
=====>>>>>del tp_ie for vap rax0[ 605.144146] Set_TP_IE_Proc():clear tp ie operation.
iwpriv rax0 set tp_ie=
iwpriv rax0 set mapEnable=0
[ 605.164322] Set_Map_Proc current MAP MODE is 0
iwpriv rax0 set mapR2Enable=0
[ 605.176192] Set_MapR2_Proc MAP R2 is already disabled
iwpriv rax0 set SSID=0xDEADBEEF
[ 605.280374] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 605.300830] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 605.312085] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set HideSSID=0
mumimo_config rax0 1
iwpriv rax0 set MuMimo=1
iwpriv rax0 set [ 605.408210] sync for : ra0
BeaconPeriod=100[ 605.412457] sync for : rax0
iwpriv rax0 set RTSThreshold=234[ 605.418879] Set_RTSThreshold_Proc: set wdev5 rts length threshold=2346(0x92a)
6
iwpriv rax0 set FragThreshold=23[ 605.429382] Set_FragThreshold_Proc::set wdev5 FragThreshold=2346)
46
iwpriv rax0 set DtimPeriod=1
iwpriv rax0 set WmmCapable=1
iwpriv rax0 set NoForwarding=0
iwpriv rax0 set NoForwardingBTNBSSID=0
iwpriv rax0 set UAPSDCapable=1
killall -q -SIGINT rt2860apd_x
iwpriv rax0 set AuthMode=WPA2PSK
iwpriv rax0 set EncrypType=AES
iwpriv rax0 set IEEE8021X=0
iwpriv rax0 set RekeyInterval=0
iwpriv rax0 set WPAPSK=F4k3nsz1t.8
iwpriv rax0 set WscConfMode=7
iwpriv rax0 set WscConfStatus=2
iwpriv rax0 set WscVendorPin[ 605.636367] 7981@C12L1,RTMPAPPrivIoctlSet() 3789: IOCTL::(iwpriv) Command not Support [WscLabelDisabled=0]
Code=93350273
iwpriv rax0 set WscLabelDisabled=0
iwpriv rax0 set WscSetupLock=0
=====>>>>> acPolicy: off action: black!!!!
iwpriv rax0 set AccessPolicy=0
iwpriv rax0 set Hide[ 605.662835] 7981@C03L1,ExtEventBeaconLostHandler() 176: AP Beacon OFF!!!
SSID=0
iwpriv rax0 set SSID=0xDEADBEEF
[ 605.674819] 7981@C00L1,mt7981_apply_dpd_flatness_data() 624: eeprom 0x19a bit 0 is 0, do runtime cal
[ 605.695191] 7981@C12L1,EDCCAInit() 22366: EDCCA compensation: uni_compensation=0, bw_compensation=0, final compensation=0
[ 605.706286] WiFi@C12L1,wifi_sys_open() 907: wifi_sys_open():band1 group_idx[5]=4, bw_grp=16 omac=0
iwpriv rax0 set hw_nat_register=1
[ 605.798439] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
[ 605.806562] mtk_ppe_dev_register_hook : rax0 has been registered in wifi_hook_if table[2]
brctl addif br-lan rax0
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax1
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax1
ifconfig rax1 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax3
[ 607.141137] ath_band_steering_netlink_receive 161 pid = 4642
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax3
ifconfig rax3 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local apclix0
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan apclix0
[ 608.789348] device apclix0 left promiscuous mode
[ 608.794678] br-lan: port 6(apclix0) entered disabled state
ifconfig apclix0 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl seti[ 609.013898] br-lan: port 6(apclix0) entered blocking state
fvlan br-lan rax[ 609.020054] br-lan: port 6(apclix0) entered disabled state
0 3 1
brctl add[ 609.027146] device apclix0 entered promiscuous mode
if br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax2
gp_id_rand = 45d6
random_suffix = 45d6
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
wifi_vap_local rax4
gp_id_rand = 45d6
random_suffix = 45d6
brctl delif br-lan rax4
ifconfig rax4 down
brctl show br-lan
brctl setifvlan br-lan eth0.2 3 1
brctl setifvlan br-lan eth0.3 3 1
brctl setifvlan br-lan eth0.4 3 1
brctl addif br-lan ra0
device ra0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra0 3 1
brctl addif br-lan ra1
can't add ra1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra1 4 1
can't set ra1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan ra3
can't add ra3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra3 3 1
can't set ra3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apcli0
device apcli0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apcli0 3 1
brctl addif br-lan ra2
device ra2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan ra2 3 1
brctl addif br-lan ra4
can't add ra4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan ra4 3 1
can't set ra4 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax0
device rax0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax0 3 1
brctl addif br-lan rax1
can't add rax1 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax1 8 1
can't set rax1 vlan to bridge br-lan: Invalid argument
brctl addif br-lan rax3
can't add rax3 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax3 3 1
can't set rax3 vlan to bridge br-lan: Invalid argument
brctl addif br-lan apclix0
device apclix0 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan apclix0 3 1
brctl addif br-lan rax2
device rax2 is already a member of a bridge; can't enslave it to bridge br-lan.
brctl setifvlan br-lan rax2 3 1
brctl addif br-lan rax4
can't add rax4 to bridge br-lan: Invalid argument
brctl setifvlan br-lan rax4 3 1
can't set rax4 vlan to bridge br-lan: Invalid argument
nrd: stopping
nrd: 4642
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
wifi_wps ra0 pin_lock
iwpriv ra0 get_wsc setup_lock
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
wifi_wps ra0 pin_lock
iwpriv ra0 get_wsc setup_lock
nrd: starting daemon, AP steering is off, Band steering is on
[ 610.889176] ath_band_steering_netlink_receive 161 pid = 11305
[ 610.896117] ath_band_steering_netlink_receive 161 pid = 11305
[ 610.907996] ath_band_steering_netlink_receive 161 pid = 11305
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
wifi_wps ra0 pin_lock
iwpriv ra0 get_wsc setup_lock
saveconfig() begin
saveconfig() end
saveconfig() begin
saveconfig() end
restart dnsmasq
saveconfig() begin
saveconfig() end
Wanvids=0 0 0 0
Portseq=1 2 3
[IPTV] WAN_PHY_IF=eth1
[IPTV] LAN_PHY_IF=eth0.2 eth0.3 eth0.4
[ 639.302416] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 1-eth0.2: 1 2
[ 639.308607] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 2-eth0.3: 2 3
[ 639.314702] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 3-eth0.4
[ 639.314702] ÀÿÿÿôV
[ 639.314702] Àÿÿÿ: 3 4
[ 639.325165] [RTL8367S INFO] Detect IPTV module started
[IPTV] vconfig rem eth1
[ 641.931228] br-lan: port 1(eth0.2) entered disabled state
[ 641.953095] br-lan: port 1(eth0.2) entered blocking state
[ 641.958505] br-lan: port 1(eth0.2) entered forwarding state
[ 641.965212] [HNAT] Detect dev: eth0.2 state change, qid = 1, speed = 1000
[ 641.975943] br-lan: port 2(eth0.3) entered disabled state
[ 641.996910] br-lan: port 2(eth0.3) entered blocking state
[ 642.002321] br-lan: port 2(eth0.3) entered forwarding state
[ 642.008634] [HNAT] Detect dev: eth0.3 state change, qid = 2, speed = 10
[ 642.023695] br-lan: port 3(eth0.4) entered disabled state
[ 642.046129] br-lan: port 3(eth0.4) entered blocking state
[ 642.051537] br-lan: port 3(eth0.4) entered forwarding state
[ 642.057841] [HNAT] Detect dev: eth0.4 state change, qid = 3, speed = 10
[ 642.075069] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[ 642.087485] device eth0 left promiscuous mode
[ 642.092042] br-lan: port 3(eth0.4) entered disabled state
[ 642.100188] br-lan: port 2(eth0.3) entered disabled state
[ 642.106499] br-lan: port 1(eth0.2) entered disabled state
[ 642.131451] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 642.139990] device eth0 entered promiscuous mode
[ 642.144765] br-lan: port 1(eth0.2) entered blocking state
[ 642.150198] br-lan: port 1(eth0.2) entered forwarding state
[ 642.156174] br-lan: port 2(eth0.3) entered blocking state
[ 642.161578] br-lan: port 2(eth0.3) entered forwarding state
[ 642.167401] br-lan: port 3(eth0.4) entered blocking state
[ 642.172817] br-lan: port 3(eth0.4) entered forwarding state
[ 642.178717] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 642.187501] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 642.195378] [HNAT] Detect dev: eth0.4 state change, qid = 3, speed = 10
saveconfig() beg[ 642.240942] [HNAT] Detect dev: eth0.3 state change, qid = 2, speed = 10
in
[ 642.253001] [HNAT] Detect dev: eth0.2 state change, qid = 1, speed = 1000
saveconfig() end
[ 644.572923] [RTL8367S INFO] UTP_PORT0 link down speed 10
[ 644.579223] [HNAT] Detect dev: eth0.2 state change, qid = 1, speed = 10
[ 644.598796] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[ 644.610203] device eth0 left promiscuous mode
[ 644.614735] br-lan: port 3(eth0.4) entered disabled state
[ 644.621081] br-lan: port 2(eth0.3) entered disabled state
[ 644.627450] br-lan: port 1(eth0.2) entered disabled state
[ 644.667838] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 644.676386] device eth0 entered promiscuous mode
[ 644.676806] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 644.689903] br-lan: port 1(eth0.2) entered disabled state
[ 644.696403] device eth0.2 left promiscuous mode
[ 644.700950] br-lan: port 1(eth0.2) entered disabled state
[ 644.734057] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 644.740601] br-lan: port 2(eth0.3) entered blocking state
[ 644.746053] br-lan: port 2(eth0.3) entered forwarding state
[ 644.752328] [HNAT] Detect dev: eth0.3 state change, qid = 2, speed = 10
[ 644.759230] br-lan: port 3(eth0.4) entered blocking state
[ 644.764652] br-lan: port 3(eth0.4) entered forwarding state
[ 644.770799] [HNAT] Detect dev: eth0.4 state change, qid = 3, speed = 10
[ 644.780652] br-lan: port 1(eth0.2) entered blocking state
[ 644.786100] br-lan: port 1(eth0.2) entered disabled state
[ 644.791685] device eth0.2 entered promiscuous mode
[ 644.796609] br-lan: port 1(eth0.2) entered blocking state
[ 644.802004] br-lan: port 1(eth0.2) entered forwarding state
[ 644.813372] br-lan: port 2(eth0.3) entered disabled state
[ 644.820010] device eth0.3 left promiscuous mode
[ 644.824629] br-lan: port 2(eth0.3) entered disabled state
cat: read error: Invalid argument
[ 644.894081] br-lan: port 2(eth0.3) entered blocking state
[ 644.899477] br-lan: port 2(eth0.3) entered disabled state
[ 644.905166] device eth0.3 entered promiscuous mode
[ 644.910088] br-lan: port 2(eth0.3) entered blocking state
[ 644.915531] br-lan: port 2(eth0.3) entered forwarding state
[ 644.922994] br-lan: port 3(eth0.4) entered disabled state
[ 644.929634] device eth0.4 left promiscuous mode
[ 644.934258] br-lan: port 3(eth0.4) entered disabled state
[ 645.033929] br-lan: port 3(eth0.4) entered blocking state
[ 645.039323] br-lan: port 3(eth0.4) entered disabled state
[ 645.044964] device eth0.4 entered promiscuous mode
[ 645.049843] br-lan: port 3(eth0.4) entered blocking state
[ 645.055261] br-lan: port 3(eth0.4) entered forwarding state
[ 645.062465] mtk_soc_eth 15100000.ethernet eth1: configuring for fixed/2500base-x link mode
[ 645.693148] [HNAT] Detect dev: eth0.2 state change, qid = 1, speed = 10
[ 645.709115] [HNAT] Detect dev: eth0.3 state change, qid = 2, speed = 10
[ 645.727163] [HNAT] Detect dev: eth0.4 state change, qid = 3, speed = 10
Wanvids=0 0 0 0
Portseq=1 2 3
[IPTV] WAN_PHY_IF=eth1
[IPTV] LAN_PHY_IF=eth0.2 eth0.3 eth0.4
[ 646.197357] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 1-eth0.2: 1 2
[ 646.203579] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 2-eth0.3: 2 3
[ 646.209666] [RTL8367S INFO] Set LAN VPORT-VID PAIR: 3-eth0.4
[ 646.209666] ÀÿÿÿôV
[ 646.209666] Àÿÿÿ: 3 4
[ 646.221287] [RTL8367S INFO] Detect IPTV module started
*******switch_set_default
>>>>>> clear_switch_vlan
[ 648.471938] Lan Domain: tplinklogin.net
[ 648.475822] Lan Domain: www.tplinklogin.net
restart dnsmasq
*******set_switch_vlan vid=2 mem= 0 1 2 tag=off cpu=6
####port 0 set pvid 2
####port 1 set pvid 2
####port 2 set pvid 2
####untagged_ports: 0 1 2
####tagged_ports:
####vlan 2 set ports " 0 1 2 6t"
****switch_vlan_apply***
****switch_vlan_apply Done***
[ 650.812907] [RTL8367S INFO] UTP_PORT0 link up speed 1000
[ 650.818805] [HNAT] Detect dev: eth0.2 state change, qid = 1, speed = 1000
*******set_multicast_router
[del_tc_root] true true true true
[del_tc_root] input:
QDMA fc reg's bit 16 should be 0 in pppq mode.
The Hqos mode is not changed.
[del_tc_root] true true true true
[del_tc_root] input:
The Hqos mode is not changed.
[del_tc_root] true true true true
[del_tc_root] input:
The Hqos mode is not changed.
saveconfig() begin
saveconfig() end
--------------------sys is ap-----------------
=========================== SWITCH MODE LOCK ==========================
-----------------section line lt 1--------------
merge remodel info to ap mode begin
merge remodel info to ap mode end
-----------------ap-config is null--------------
-------------sync start----------
------------sync mode files-----------------
------------cp files-----------------accountmgnt
------------cp files-----------------wireless
------------cp files-----------------system
------------cp files-----------------locale
------------cp files-----------------usbshare
------------cp files-----------------administration
------------cp files-----------------cloud_config
------------cp files-----------------systime
------------cp files-----------------history_list
------------cp files-----------------auto_upgrade
------------cp files-----------------tmpv2
-------------sync mode files end----------------
-------------sync end----------
[aviraSentinelFull]: stop
[aviraSentinelLite]: stop
init_all_vif_name
DEVICES=wifi0 wifi1
dev=wifi0
dev=wifi1
report_get_device_status boot stop!
[ 749.233561] UBIFS (ubi2:1): un-mount UBI device 2
[ 749.238271] UBIFS (ubi2:1): background thread "ubifs_bgt2_1" stops
[ 749.246537] UBIFS (ubi2:0): un-mount UBI device 2
[ 749.251247] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" stops
[ 749.259434] UBIFS (ubi1:0): un-mount UBI device 1
[ 749.264172] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" stops
[ 751.282206] reboot: Restarting system
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment