https://github.com/tetele/onju-voice-satellite
This Gist will no longer be maintained, please check out the new location for the config.
Ever since voice satellites were introduced to Home Assistant, people wanted to use good microphones and speakers for this purpose, but not many were really available.
Here is the best setup (I think so :D) for K-series Keychron keyboards on Linux.
Note: many newer Keychron keyboards use QMK as firmware and most tips here do not apply to them. Maybe the ones related to Bluetooth can be useful, but everything related to Apple's keyboard module (hid_apple) on Linux, won't work. As far as I know, all QMK-based boards use the hid_generic module instead. Examples of QMK-based boards are: Q, Q-Pro, V, K-Pro, etc.
Most of these commands have been tested on Ubuntu 20.04 and should also work on most Debian-based distributions. If a command happens not to work for you, take a look in the comment section.
Older Keychron keyboards (those not based on QMK) use the hid_apple driver on Linux, even in the Windows/Android mode, both in Bluetooth and Wired modes.
| # docker network create nextcloud | |
| NOTES: | |
| 1. [email protected] | |
| 2. TRUSTED_PROXIES values based on your 'nexcloud network' | |
| 3. remove traefik.http.middlewares.nextcloud.headers.contentSecurityPolicy and | |
| traefik.http.middlewares.nextcloud.headers.customFrameOptionsValue if you don't want to allow iframe your domain | |
| 3 | |
| # cat docker-compose.yml |
| #!/bin/bash | |
| # README You probablyl don't need this script anymore. Please read the comments below to catch up. | |
| ## Description | |
| # Lenovo Carbon X1 Gen 7 - Audio and microphone fix - kernel 5.3+ required. | |
| # The script has only been tested for Arch and OpenSuse, | |
| # Original thread: https://forums.lenovo.com/t5/Ubuntu/Guide-X1-Carbon-7th-Generation-Ubuntu-compatability/td-p/4489823 | |
| # Prereq: Install Linux 5.3 or newer |
UPDATE: I have baked the ideas in this file inside a Python CLI tool called pyds-cli. Please find it here: https://github.com/ericmjl/pyds-cli
Having done a number of data projects over the years, and having seen a number of them up on GitHub, I've come to see that there's a wide range in terms of how "readable" a project is. I'd like to share some practices that I have come to adopt in my projects, which I hope will bring some organization to your projects.
Disclaimer: I'm hoping nobody takes this to be "the definitive guide" to organizing a data project; rather, I hope you, the reader, find useful tips that you can adapt to your own projects.
Disclaimer 2: What I’m writing below is primarily geared towards Python language users. Some ideas may be transferable to other languages; others may not be so. Please feel free to remix whatever you see here!
To login into eduroam from the command line you'll need to have wpa_supplicant package installed. It is part of the core of most Linux distributions, to check if you have it run wpa_supplicant -v
Start by creating a profile file for the network:
wpa_passphrase <ssid> > <ssid>.profile
If you try to run gazebo for the first time, at least in Ubuntu 14.04 with ROS Indigo you'll get the annoying messages:
Warning [gazebo.cc:215] Waited 1seconds for namespaces.
Error [gazebo.cc:220] Waited 11 seconds for namespaces. Giving up.
Error [Node.cc:90] No namespace found
And you won't have a model for the sun and the ground_plane (really OSRF??).