Skip to content

Instantly share code, notes, and snippets.

View jfroy's full-sized avatar

Jean-François Roy jfroy

123 followers · 82 following
View GitHub Profile
@kabakaev
kabakaev / esphome_ble_esp32c6.yaml
Last active September 11, 2025 12:15
ESPHome BLE proxy on ESP32-C6 board
# # This is an esphome configuration file.
# # It is tested on debian-12 and [nanoESP32-C6](https://github.com/wuxx/nanoESP32-C6/blob/master/README_en.md).
# # This configuration should work on any Linux distribution and any ESP32-C6 board though.
#
# # Create and activate python venv, install esphome:
# test -d ./venv || python3 -m venv venv
# source ./venv/bin/activate
# pip install esphome --upgrade
#
# # Connect ESP32-C6 to USB, press and hold "Boot" button, press and release "Reset", release "Boot".
@archeYR
archeYR / 8bitdofirmwarelinux.md
Last active December 7, 2025 20:01
8BitDo Firmware Updater in Wine

This is about running 8BitDo's Firmware Update tool for Windows in Wine. It can be used for updating newer 8BitDo devices that may not be supported by fwupd on Linux. This tool uses .NET Framework, so it will need Wine Mono to be installed (dotnet48 wintericks verb was tested to work as well).

This tool needs Segoe UI Symbol font, on Arch this font is provided by ttf-ms-win10-auto package. For other distributions there is install script.

You will have to let Wine access device's HID interface for updating the firmware. Most importantly it should be a boot HID interface (exposed when device is in bootloader mode, often referred to as "manual update mode" or "advanced mode"). It is also worth adding the Product IDs for HID interfaces that are exposed under different conditions (for example, Ultimate Bluetooth Controller's receiver exposes a HID interface when controller is not connected),

@thubble
thubble / chromium-support-disjoint-vaapi-export-import.patch
Last active February 18, 2024 21:28
Patch to allow Chromium zero-copy VaapiVideoDecoder to work when va-api exports dma-buf planes as disjoint, such as with AMD Mesa
--- a/gpu/command_buffer/service/shared_image/external_vk_image_backing_factory.cc
+++ b/gpu/command_buffer/service/shared_image/external_vk_image_backing_factory.cc
@@ -257,7 +257,7 @@
return false;
}
-#if BUILDFLAG(IS_LINUX)
+#if 0
if (format.IsLegacyMultiplanar()) {
// ExternalVkImageBacking doesn't work properly with external sampler
@usrbinkat
usrbinkat / README.md
Last active May 12, 2025 16:25
Home K8s Native FW / Router

Kubernetes Single Node Edge Firewall, Gateway, and Ubiquiti AP Controller

This is a rought draft document describing the build of VyOS on microk8s for use as a home WAN firewall/router. I also use an Ubiquiti UAP Pro Access Point to broadcast my home wifi networks.

Here is a visual of the silent fanless intel i7 kubernetes node, access point, and power-over-ethernet adapter. kill-a-watt

This is a slightly over estimated annual power cost estimate for powering the whole setup. Est Annual Cost

@steve-todorov
steve-todorov / README.md
Last active August 22, 2022 21:14

README

After the 1948278201th time of having to apply this patch manually after a CSGO update I decided it's time for a script. In essense this script will:

  1. Detect the distribution
  2. Install the respective libtcmalloc via the disto's package manager.
  3. Search the lib paths to find the location of libtcmalloc_minimal.so.4
  4. Copy it into the GAMEROOT/bin/linux64 path.
@micahcc
micahcc / gen_compile_commands.py
Created September 14, 2021 19:04
#!/usr/bin/env python
import json
import subprocess
import os
import sys
def resolve_depset_to_paths(artifacts, path_fragments, depset):
all_inputs = []
for artifact_id in depset["directArtifactIds"]:
@Linerre
Linerre / Setting $PATH for zsh on macOS.md
Last active November 27, 2025 15:37
Properly setting $PATH for zsh on macOS (fighting with path_helper)
@mikestecker
mikestecker / optimising-unifi-performance.md
Last active November 21, 2025 11:50
optimising-unifi-performance

optimising-unifi-performance

NOTE: Content below is written by Adrian Mace. Click here for an updated version.

Below are the key settings that I apply on any unifi installation for optimal performance.

Settings

Settings > Site

  • Ensure Enable Advanced Features is enabled
    This allows you to follow along with the guide in it's entirety.
@silvesthu
silvesthu / GPUOptimizationForGameDev.md
Last active December 2, 2025 10:53
GPU Optimization for GameDev
@Bilka2
Bilka2 / Belt Balancers 1-8 → 1-8.md
Last active March 19, 2025 05:32
Balancers