Skip to content

Instantly share code, notes, and snippets.

@leighklotz

leighklotz/dmesg.txt

Created January 26, 2024 19:53
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save leighklotz/05bcbd928dbbbe836ab4232d6bbc1555 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save leighklotz/05bcbd928dbbbe836ab4232d6bbc1555 to your computer and use it in GitHub Desktop.
Download ZIP
RPI5 X1002 MP32 failures
Raw
dmesg.txt
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[ 0.000000] Linux version 6.1.0-rpi7-rpi-2712 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.1.63-1+rpt1 (2023-11-24)
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000018000000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 14 pages/cpu s177448 r8192 d43736 u229376
[ 0.000000] pcpu-alloc: s177448 r8192 d43736 u229376 alloc=14*16384
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521728
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=D8:3A:DD:D0:72:20 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=0d0ceb6a-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=US
[ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
[ 0.000000] Memory: 7894048K/8380416K available (12352K kernel code, 2186K rwdata, 4112K rodata, 4480K init, 1216K bss, 158688K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 40061 entries in 40 pages
[ 0.000000] ftrace: allocated 40 pages with 2 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000153] Console: colour dummy device 80x25
[ 0.000172] printk: console [tty1] enabled
[ 0.000189] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000196] pid_max: default: 32768 minimum: 301
[ 0.000221] LSM: Security Framework initializing
[ 0.000282] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[ 0.000308] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[ 0.000732] cgroup: Disabling memory control group subsystem
[ 0.001234] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.001239] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.001279] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.001281] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.001314] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.001317] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.001402] rcu: Hierarchical SRCU implementation.
[ 0.001405] rcu: Max phase no-delay instances is 1000.
[ 0.002044] EFI services will not be available.
[ 0.002162] smp: Bringing up secondary CPUs ...
[ 0.002389] Detected PIPT I-cache on CPU1
[ 0.002438] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[ 0.002691] Detected PIPT I-cache on CPU2
[ 0.002727] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[ 0.002973] Detected PIPT I-cache on CPU3
[ 0.003006] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[ 0.003043] smp: Brought up 1 node, 4 CPUs
[ 0.003048] SMP: Total of 4 processors activated.
[ 0.003051] CPU features: detected: 32-bit EL0 Support
[ 0.003054] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.003057] CPU features: detected: Common not Private translations
[ 0.003060] CPU features: detected: CRC32 instructions
[ 0.003063] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.003065] CPU features: detected: LSE atomic instructions
[ 0.003068] CPU features: detected: Privileged Access Never
[ 0.003070] CPU features: detected: RAS Extension Support
[ 0.003073] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.003113] CPU: All CPU(s) started at EL2
[ 0.003115] alternatives: applying system-wide alternatives
[ 0.004992] devtmpfs: initialized
[ 0.007587] Enabled cp15_barrier support
[ 0.007594] Enabled setend support
[ 0.007658] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.007666] futex hash table entries: 1024 (order: 2, 65536 bytes, linear)
[ 0.008588] pinctrl core: initialized pinctrl subsystem
[ 0.008819] DMI not present or invalid.
[ 0.009014] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.010224] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.010276] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.010351] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.010375] audit: initializing netlink subsys (disabled)
[ 0.010446] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[ 0.010583] thermal_sys: Registered thermal governor 'step_wise'
[ 0.010601] cpuidle: using governor menu
[ 0.010670] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.010710] ASID allocator initialised with 32768 entries
[ 0.011008] Serial: AMBA PL011 UART driver
[ 0.012836] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[ 0.013533] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
[ 0.013571] printk: console [ttyAMA10] enabled
[ 0.020744] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-01-05T15:57:40, variant start_cd
[ 0.024746] raspberrypi-firmware soc:firmware: Firmware hash is 30cc5f3700000000000000000000000000000000
[ 0.033409] KASLR enabled
[ 0.039400] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[ 0.040469] iommu: Default domain type: Translated
[ 0.040473] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.040569] SCSI subsystem initialized
[ 0.040621] usbcore: registered new interface driver usbfs
[ 0.040631] usbcore: registered new interface driver hub
[ 0.040643] usbcore: registered new device driver usb
[ 0.040748] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.040839] pps_core: LinuxPPS API ver. 1 registered
[ 0.040841] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.040846] PTP clock support registered
[ 0.041094] vgaarb: loaded
[ 0.041228] clocksource: Switched to clocksource arch_sys_counter
[ 0.041387] VFS: Disk quotas dquot_6.6.0
[ 0.041405] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 0.041439] FS-Cache: Loaded
[ 0.041471] CacheFiles: Loaded
[ 0.042873] NET: Registered PF_INET protocol family
[ 0.043048] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear)
[ 0.045486] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear)
[ 0.045538] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear)
[ 0.045544] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear)
[ 0.045815] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear)
[ 0.047579] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.047725] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear)
[ 0.047842] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear)
[ 0.047943] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear)
[ 0.048101] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.048272] RPC: Registered named UNIX socket transport module.
[ 0.048276] RPC: Registered udp transport module.
[ 0.048278] RPC: Registered tcp transport module.
[ 0.048280] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.048286] PCI: CLS 0 bytes, default 64
[ 0.048425] Trying to unpack rootfs image as initramfs...
[ 0.053799] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[ 0.053996] kvm [1]: IPA Size Limit: 40 bits
[ 0.054013] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
[ 0.054065] kvm [1]: vgic interrupt IRQ9
[ 0.054139] kvm [1]: VHE mode initialized successfully
[ 0.301393] Freeing initrd memory: 16704K
[ 0.339988] Initialise system trusted keyrings
[ 0.340172] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.342033] zbud: loaded
[ 0.342627] NFS: Registering the id_resolver key type
[ 0.342637] Key type id_resolver registered
[ 0.342639] Key type id_legacy registered
[ 0.342659] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.342662] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.342733] F2FS not supported on PAGE_SIZE(16384) != 4096
[ 0.342817] Key type asymmetric registered
[ 0.342820] Asymmetric key parser 'x509' registered
[ 0.342842] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.342909] io scheduler mq-deadline registered
[ 0.342914] io scheduler kyber registered
[ 0.343595] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 31)
[ 0.343726] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 32)
[ 0.343839] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 33)
[ 0.343946] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 34)
[ 0.344064] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 35)
[ 0.344176] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 36)
[ 0.345781] gpio-461 (RP1 RUN pin): hogged as output/high
[ 0.346502] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes
[ 0.346507] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
[ 0.346654] Console: switching to colour frame buffer device 240x67
[ 0.348187] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered!
[ 0.381692] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.382252] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 38, base_baud = 6000000) is a 16550A
[ 0.382299] serial serial0: tty port ttyS0 registered
[ 0.382845] iproc-rng200 107d208000.rng: hwrng registered
[ 0.382975] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[ 0.383670] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[ 0.385637] brd: module loaded
[ 0.387122] loop: module loaded
[ 0.387344] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 0.387527] Loading iSCSI transport class v2.0-870.
[ 0.388614] usbcore: registered new interface driver r8152
[ 0.388628] usbcore: registered new interface driver lan78xx
[ 0.388638] usbcore: registered new interface driver smsc95xx
[ 0.388774] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.388851] dwc_otg: FIQ enabled
[ 0.388854] dwc_otg: NAK holdoff enabled
[ 0.388856] dwc_otg: FIQ split-transaction FSM enabled
[ 0.388860] Module dwc_common_port init
[ 0.389133] usbcore: registered new interface driver uas
[ 0.389146] usbcore: registered new interface driver usb-storage
[ 0.389353] mousedev: PS/2 mouse device common for all mice
[ 0.397270] rpi-rtc soc:rpi_rtc: registered as rtc0
[ 0.398741] rpi-rtc soc:rpi_rtc: setting system clock to 2024-01-26T19:29:47 UTC (1706297387)
[ 0.399397] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[ 0.399401] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.402024] sdhci: Secure Digital Host Controller Interface driver
[ 0.402027] sdhci: Copyright(c) Pierre Ossman
[ 0.402177] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.402596] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.402632] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.402644] hid: raw HID events driver (C) Jiri Kosina
[ 0.402668] usbcore: registered new interface driver usbhid
[ 0.402671] usbhid: USB HID core driver
[ 0.402858] NET: Registered PF_PACKET protocol family
[ 0.402887] Key type dns_resolver registered
[ 0.403139] registered taskstats version 1
[ 0.403164] Loading compiled-in X.509 certificates
[ 0.409545] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.409574] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ 0.409761] Key type .fscrypt registered
[ 0.409764] Key type fscrypt-provisioning registered
[ 0.411596] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
[ 0.411605] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff]
[ 0.411630] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000
[ 0.411643] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000
[ 0.411659] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.412851] brcm-pcie 1000110000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE
[ 0.412861] brcm-pcie 1000110000.pcie: Forcing gen 2
[ 0.412913] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00
[ 0.412917] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.412921] pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb])
[ 0.412926] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 0.412943] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[ 0.413002] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.413961] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.521234] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC)
[ 0.521265] pci 0000:01:00.0: [10ec:5762] type 00 class 0x010802
[ 0.521290] pci 0000:01:00.0: reg 0x10: [mem 0x1b00000000-0x1b00003fff 64bit]
[ 0.521323] pci 0000:01:00.0: reg 0x24: [mem 0x1b00000000-0x1b00001fff]
[ 0.521498] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.533261] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.533273] pci 0000:00:00.0: BAR 8: assigned [mem 0x1b00000000-0x1b000fffff]
[ 0.533279] pci 0000:01:00.0: BAR 0: assigned [mem 0x1b00000000-0x1b00003fff 64bit]
[ 0.533292] pci 0000:01:00.0: BAR 5: assigned [mem 0x1b00004000-0x1b00005fff]
[ 0.533299] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.533304] pci 0000:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff]
[ 0.533313] pci 0000:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 0.533324] pci 0000:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 0.533420] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 0.533474] pcieport 0000:00:00.0: PME: Signaling with IRQ 39
[ 0.533552] pcieport 0000:00:00.0: AER: enabled with IRQ 39
[ 0.533753] nvme nvme0: pci function 0000:01:00.0
[ 0.533784] brcm-pcie 1000110000.pcie: clkreq control enabled
[ 0.533795] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[ 0.533940] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[ 0.533946] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]
[ 0.533970] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 0.533983] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 0.534008] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 0.534021] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.535107] brcm-pcie 1000120000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE
[ 0.535118] brcm-pcie 1000120000.pcie: Forcing gen 2
[ 0.535155] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00
[ 0.535159] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.535162] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 0.535167] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 0.535182] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400
[ 0.535236] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 0.536100] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.607014] nvme nvme0: allocated 64 MiB host memory buffer.
[ 0.612375] nvme nvme0: 4/0/0 default/read/poll queues
[ 0.618553] nvme nvme0: Ignoring bogus Namespace Identifiers
[ 0.619387] nvme0n1: p1 p2
[ 0.641238] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 0.641266] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000
[ 0.641287] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[ 0.641297] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[ 0.641307] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[ 0.641398] pci 0001:01:00.0: supports D1
[ 0.641402] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.653242] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.653254] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
[ 0.653260] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[ 0.653266] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[ 0.653272] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[ 0.653278] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.653283] pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
[ 0.653292] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 0.653302] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 0.653422] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[ 0.653467] pcieport 0001:00:00.0: PME: Signaling with IRQ 45
[ 0.653545] pcieport 0001:00:00.0: AER: enabled with IRQ 45
[ 0.653701] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[ 0.653706] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[ 0.653718] rp1 0001:01:00.0: enabling device (0000 -> 0002)
[ 0.654883] rp1 0001:01:00.0: chip_id 0x20001927
[ 0.677389] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 113 (d8:3a:dd:d0:72:20)
[ 0.678161] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[ 0.737349] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 0.737358] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[ 0.737817] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810
[ 0.737834] xhci-hcd xhci-hcd.0: irq 138, io mem 0x1f00200000
[ 0.737912] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 0.737916] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[ 0.737921] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[ 0.738011] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.738016] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.738019] usb usb1: Product: xHCI Host Controller
[ 0.738022] usb usb1: Manufacturer: Linux 6.1.0-rpi7-rpi-2712 xhci-hcd
[ 0.738025] usb usb1: SerialNumber: xhci-hcd.0
[ 0.738182] hub 1-0:1.0: USB hub found
[ 0.738201] hub 1-0:1.0: 2 ports detected
[ 0.738420] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 0.738425] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.738428] usb usb2: Product: xHCI Host Controller
[ 0.738431] usb usb2: Manufacturer: Linux 6.1.0-rpi7-rpi-2712 xhci-hcd
[ 0.738434] usb usb2: SerialNumber: xhci-hcd.0
[ 0.738547] hub 2-0:1.0: USB hub found
[ 0.738563] hub 2-0:1.0: 1 port detected
[ 0.797346] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 0.797352] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[ 0.797809] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810
[ 0.797825] xhci-hcd xhci-hcd.1: irq 143, io mem 0x1f00300000
[ 0.797906] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 0.797911] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[ 0.797915] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[ 0.797999] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.798004] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.798007] usb usb3: Product: xHCI Host Controller
[ 0.798010] usb usb3: Manufacturer: Linux 6.1.0-rpi7-rpi-2712 xhci-hcd
[ 0.798013] usb usb3: SerialNumber: xhci-hcd.1
[ 0.798130] hub 3-0:1.0: USB hub found
[ 0.798148] hub 3-0:1.0: 2 ports detected
[ 0.798356] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 0.798361] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.798364] usb usb4: Product: xHCI Host Controller
[ 0.798367] usb usb4: Manufacturer: Linux 6.1.0-rpi7-rpi-2712 xhci-hcd
[ 0.798370] usb usb4: SerialNumber: xhci-hcd.1
[ 0.798481] hub 4-0:1.0: USB hub found
[ 0.798496] hub 4-0:1.0: 1 port detected
[ 0.799562] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.799980] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 0.799984] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 0.799990] platform 1000800000.codec: Adding to iommu group 0
[ 0.800022] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 0.800025] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 0.800030] platform 1000880000.pisp_be: Adding to iommu group 0
[ 0.800076] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 0.800079] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 0.800088] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[ 0.800581] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.800935] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 0.800938] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 0.800944] platform axi:gpu: Adding to iommu group 1
[ 0.800995] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 0.801003] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[ 0.801847] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.802232] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[ 0.802898] mmc1: CQHCI version 5.10
[ 0.802928] sdhci-brcmstb 1000fff000.mmc: there is not valid maps for state default
[ 0.803208] pl011-axi 1f00030000.serial: cts_event_workaround enabled
[ 0.803242] 1f00030000.serial: ttyAMA0 at MMIO 0x1f00030000 (irq = 132, base_baud = 0) is a PL011 AXI
[ 0.803370] mmc0: CQHCI version 5.10
[ 0.804637] of_cfs_init
[ 0.804671] of_cfs_init: OK
[ 0.839186] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[ 0.991774] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[ 0.993249] usb 1-2: new low-speed USB device number 2 using xhci-hcd
[ 0.994560] Freeing unused kernel memory: 4480K
[ 0.994613] Run /init as init process
[ 0.994616] with arguments:
[ 0.994618] /init
[ 0.994620] splash
[ 0.994622] with environment:
[ 0.994625] HOME=/
[ 0.994627] TERM=linux
[ 1.022655] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[ 1.053286] usb 3-1: new low-speed USB device number 2 using xhci-hcd
[ 1.150711] usb 1-2: New USB device found, idVendor=046d, idProduct=c050, bcdDevice=27.20
[ 1.150721] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.150725] usb 1-2: Product: USB-PS/2 Optical Mouse
[ 1.150729] usb 1-2: Manufacturer: Logitech
[ 1.195167] input: pwr_button as /devices/platform/pwr_button/input/input0
[ 1.209762] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:046D:C050.0001/input/input1
[ 1.212033] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-xhci-hcd.0-2/input0
[ 1.220703] brcmstb-i2c 107d508200.i2c: @200000hz registered in interrupt mode
[ 1.221002] brcmstb-i2c 107d508280.i2c: @200000hz registered in interrupt mode
[ 1.292463] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
[ 1.298581] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 1.299695] Console: switching to colour dummy device 80x25
[ 1.301958] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[ 1.304334] Registered IR keymap rc-cec
[ 1.304377] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
[ 1.304428] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input2
[ 1.305110] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[ 1.307610] Registered IR keymap rc-cec
[ 1.307652] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
[ 1.307700] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input3
[ 1.308756] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[ 1.308897] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[ 1.308993] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[ 1.309126] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 1.309208] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 1.356034] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
[ 1.411449] Console: switching to colour frame buffer device 240x67
[ 1.429733] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device
[ 1.806906] usb 3-1: New USB device found, idVendor=16c0, idProduct=27db, bcdDevice= 1.00
[ 1.806915] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.806919] usb 3-1: Product: DigiKey
[ 1.806923] usb 3-1: Manufacturer: digistump.com
[ 1.878056] input: digistump.com DigiKey as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:16C0:27DB.0002/input/input4
[ 1.937321] hid-generic 0003:16C0:27DB.0002: input,hidraw1: USB HID v1.01 Keyboard [digistump.com DigiKey] on usb-xhci-hcd.1-1/input0
[ 2.065233] usb 3-2: new low-speed USB device number 3 using xhci-hcd
[ 2.237178] usb 3-2: New USB device found, idVendor=04d9, idProduct=a0ce, bcdDevice= 4.07
[ 2.237183] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.237187] usb 3-2: Product: ES-87
[ 2.237190] usb 3-2: Manufacturer: Keyed Up Labs
[ 2.273374] input: Keyed Up Labs ES-87 as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:04D9:A0CE.0003/input/input5
[ 2.333375] hid-generic 0003:04D9:A0CE.0003: input,hidraw2: USB HID v1.10 Keyboard [Keyed Up Labs ES-87] on usb-xhci-hcd.1-2/input0
[ 2.345388] input: Keyed Up Labs ES-87 Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:04D9:A0CE.0004/input/input6
[ 2.405298] hid-generic 0003:04D9:A0CE.0004: input,hidraw3: USB HID v1.10 Keyboard [Keyed Up Labs ES-87] on usb-xhci-hcd.1-2/input1
[ 3.543658] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 3.672937] NET: Registered PF_INET6 protocol family
[ 3.673405] Segment Routing with IPv6
[ 3.673418] In-situ OAM (IOAM) with IPv6
[ 3.687477] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 3.687491] systemd[1]: Detected architecture arm64.
[ 3.688391] systemd[1]: Hostname set to <rpi5>.
[ 3.730983] uart-pl011 107d001000.serial: no DMA platform data
[ 3.886616] systemd[1]: Queued start job for default target graphical.target.
[ 3.906277] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 3.906719] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 3.907027] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 3.907335] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 3.907529] systemd[1]: Created slice user.slice - User and Session Slice.
[ 3.907649] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 3.907928] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 3.908015] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 3.908066] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 3.908109] systemd[1]: Reached target slices.target - Slice Units.
[ 3.908151] systemd[1]: Reached target swap.target - Swaps.
[ 3.908188] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 3.908413] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 3.908500] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 3.908913] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 3.909101] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 3.909373] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 3.909824] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 3.910010] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 3.910242] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 3.911272] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 3.912523] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 3.914101] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 3.914374] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 3.916219] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 3.917962] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 3.919493] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 3.921521] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
[ 3.923736] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 3.926154] systemd[1]: Starting [email protected] - Load Kernel Module drm...
[ 3.928329] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 3.930256] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
[ 3.932245] systemd[1]: Starting [email protected] - Load Kernel Module loop...
[ 3.932601] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 3.940121] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 3.942266] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 3.943813] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 3.945784] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 3.947885] fuse: init (API version 7.37)
[ 3.949619] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
[ 3.950016] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 3.950495] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 3.951091] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 3.951999] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[ 3.964098] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 3.965127] systemd[1]: [email protected]: Deactivated successfully.
[ 3.966093] systemd[1]: Finished [email protected] - Load Kernel Module configfs.
[ 3.966679] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 3.968072] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 3.968867] EXT4-fs (nvme0n1p2): re-mounted. Quota mode: none.
[ 3.970270] i2c_dev: i2c /dev entries driver
[ 3.971211] systemd[1]: [email protected]: Deactivated successfully.
[ 3.971441] systemd[1]: Finished [email protected] - Load Kernel Module drm.
[ 3.971926] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 3.972103] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 3.972489] systemd[1]: [email protected]: Deactivated successfully.
[ 3.972656] systemd[1]: Finished [email protected] - Load Kernel Module fuse.
[ 3.973025] systemd[1]: [email protected]: Deactivated successfully.
[ 3.973192] systemd[1]: Finished [email protected] - Load Kernel Module loop.
[ 3.973650] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 3.974170] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 3.975865] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 3.977153] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 3.977336] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 3.977487] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 3.978906] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 3.979058] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 3.980572] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 3.982151] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 3.985548] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 3.992978] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 4.018114] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 4.023308] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 4.049821] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 4.050585] systemd[1]: Started systemd-journald.service - Journal Service.
[ 4.067829] systemd-journald[326]: Received client request to flush runtime journal.
[ 4.381505] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[ 4.416659] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[ 4.422235] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[ 4.425858] mc: Linux media interface: v0.10
[ 4.440957] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[ 4.443845] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[ 4.445582] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[ 4.447016] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[ 4.464168] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[ 4.467086] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[ 4.487739] videodev: Linux video capture interface: v2.00
[ 4.494859] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[ 4.598049] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.598395] cfg80211: Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 4.598704] cfg80211: Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 4.599013] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.600463] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.607505] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 4.609313] rpivid 1000800000.codec: Device registered as /dev/video19
[ 4.618437] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 4.618568] pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700
[ 4.618573] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000
[ 4.618576] pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000
[ 4.618580] pispbe 1000880000.pisp_be: Register nodes for group 0
[ 4.620011] pispbe 1000880000.pisp_be: input device node registered as /dev/video20
[ 4.624353] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21
[ 4.624630] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22
[ 4.640748] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23
[ 4.655000] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24
[ 4.670958] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25
[ 4.696609] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26
[ 4.713880] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 4.716621] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.716994] usbcore: registered new interface driver brcmfmac
[ 4.724703] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27
[ 4.731479] pispbe 1000880000.pisp_be: config device node registered as /dev/video28
[ 4.744454] pispbe 1000880000.pisp_be: Register nodes for group 1
[ 4.749941] pispbe 1000880000.pisp_be: input device node registered as /dev/video29
[ 4.762634] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30
[ 4.766259] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31
[ 4.768545] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32
[ 4.768632] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33
[ 4.768689] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34
[ 4.768747] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35
[ 4.768804] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36
[ 4.768860] pispbe 1000880000.pisp_be: config device node registered as /dev/video37
[ 4.881209] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
[ 5.079813] Bluetooth: Core ver 2.22
[ 5.082265] NET: Registered PF_BLUETOOTH protocol family
[ 5.082276] Bluetooth: HCI device and connection manager initialized
[ 5.082289] Bluetooth: HCI socket layer initialized
[ 5.082295] Bluetooth: L2CAP socket layer initialized
[ 5.082306] Bluetooth: SCO socket layer initialized
[ 5.100665] Bluetooth: HCI UART driver ver 2.3
[ 5.100678] Bluetooth: HCI UART protocol H4 registered
[ 5.100735] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 5.100974] Bluetooth: HCI UART protocol Broadcom registered
[ 5.101188] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 5.101321] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 5.460002] Bluetooth: hci0: BCM: chip id 107
[ 5.460325] Bluetooth: hci0: BCM: features 0x2f
[ 5.461611] Bluetooth: hci0: BCM4345C0
[ 5.461627] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 5.462081] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
[ 5.555134] Adding 102384k swap on /var/swap. Priority:-2 extents:2 across:16617456k SSFS
[ 5.889795] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[ 5.889807] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 5.892289] pps pps0: new PPS source ptp0
[ 5.892339] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[ 5.923774] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 6.221932] Bluetooth: hci0: BCM: features 0x2f
[ 6.223434] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 6.223438] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 6.223749] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[ 6.348210] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.348222] Bluetooth: BNEP filters: protocol multicast
[ 6.348236] Bluetooth: BNEP socket layer initialized
[ 6.352819] Bluetooth: MGMT ver 1.22
[ 6.357906] NET: Registered PF_ALG protocol family
[ 11.663513] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 13.850100] Bluetooth: RFCOMM TTY layer initialized
[ 13.850114] Bluetooth: RFCOMM socket layer initialized
[ 13.850124] Bluetooth: RFCOMM ver 1.11
[ 68.799953] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 99.309244] nvme nvme0: controller is down; will reset: CSTS=0xffffffff, PCI_STATUS=0x10
[ 99.309253] nvme nvme0: Does your device have a faulty power saving mode enabled?
[ 99.309257] nvme nvme0: Try "nvme_core.default_ps_max_latency_us=0 pcie_aspm=off" and report a bug
[ 99.341420] nvme0n1: I/O Cmd(0x2) @ LBA 101328520, 8 blocks, I/O Error (sct 0x3 / sc 0x71)
[ 99.341428] I/O error, dev nvme0n1, sector 101328520 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 99.357364] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[ 99.432306] nvme nvme0: 4/0/0 default/read/poll queues
[ 99.447830] nvme nvme0: Ignoring bogus Namespace Identifiers
[ 1249.298621] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1249.298633] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
[ 1249.298636] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00000040/00002000
[ 1249.298639] pcieport 0000:00:00.0: [ 6] BadTLP
[ 1249.320871] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1249.320882] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1249.320885] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1249.320888] pcieport 0000:00:00.0: [12] Timeout
[ 1249.320893] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1249.320906] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 1249.320909] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00003081/00006000
[ 1249.320912] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 1249.320914] nvme 0000:01:00.0: [ 7] BadDLLP
[ 1249.320916] nvme 0000:01:00.0: [12] Timeout
[ 1252.558443] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1252.558455] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1252.558459] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1252.558462] pcieport 0000:00:00.0: [12] Timeout
[ 1252.558468] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1252.558480] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 1252.558482] nvme 0000:01:00.0: device [10ec:5762] error status/mask=000010c1/00006000
[ 1252.558485] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 1252.558488] nvme 0000:01:00.0: [ 6] BadTLP
[ 1252.558490] nvme 0000:01:00.0: [ 7] BadDLLP
[ 1252.558492] nvme 0000:01:00.0: [12] Timeout
[ 1252.558501] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1252.558511] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 1252.558513] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00000001/00006000
[ 1252.558516] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 1252.566016] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1252.566028] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1252.566031] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1252.566034] pcieport 0000:00:00.0: [12] Timeout
[ 1252.568304] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1252.568315] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1252.568318] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1252.568321] pcieport 0000:00:00.0: [12] Timeout
[ 1252.569001] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1252.569010] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1252.569013] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1252.569015] pcieport 0000:00:00.0: [12] Timeout
[ 1252.569136] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1252.569142] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1252.569145] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1252.569147] pcieport 0000:00:00.0: [12] Timeout
[ 1252.569896] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1252.569905] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1252.569907] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1252.569910] pcieport 0000:00:00.0: [12] Timeout
[ 1254.301772] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1254.301785] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1254.301788] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1254.301791] pcieport 0000:00:00.0: [12] Timeout
[ 1254.301797] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1254.301823] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 1254.301826] nvme 0000:01:00.0: device [10ec:5762] error status/mask=000010c1/00006000
[ 1254.301828] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 1254.301831] nvme 0000:01:00.0: [ 6] BadTLP
[ 1254.301833] nvme 0000:01:00.0: [ 7] BadDLLP
[ 1254.301835] nvme 0000:01:00.0: [12] Timeout
[ 1254.301852] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0
[ 1254.301863] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1254.301865] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1254.301868] pcieport 0000:00:00.0: [12] Timeout
[ 1254.301874] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 1254.301876] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00000001/00006000
[ 1254.301879] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 1254.301891] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1254.301904] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 1254.301907] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00000001/00006000
[ 1254.301909] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 1254.341263] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1254.341282] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1254.341286] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1254.341291] pcieport 0000:00:00.0: [12] Timeout
[ 1254.461407] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0
[ 1254.461432] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1254.461435] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1254.461438] pcieport 0000:00:00.0: [12] Timeout
[ 1254.461446] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 1254.461449] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00001081/00006000
[ 1254.461452] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 1254.461455] nvme 0000:01:00.0: [ 7] BadDLLP
[ 1254.461457] nvme 0000:01:00.0: [12] Timeout
[ 1258.535656] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1258.535681] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
[ 1258.535684] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00000040/00002000
[ 1258.535687] pcieport 0000:00:00.0: [ 6] BadTLP
[ 1262.645277] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1262.645294] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1262.645303] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1262.645306] pcieport 0000:00:00.0: [12] Timeout
[ 1283.434302] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 1283.434313] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 1283.434316] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 1283.434319] pcieport 0000:00:00.0: [12] Timeout
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment