Skip to content

Instantly share code, notes, and snippets.

@leighklotz

leighklotz/dmesg.txt

Created January 26, 2024 20:23
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save leighklotz/bc76b4319faca312e6ce0935dce93732 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save leighklotz/bc76b4319faca312e6ce0935dce93732 to your computer and use it in GitHub Desktop.
Download ZIP
RPI5 X1002 MP32 failures
Raw
dmesg.txt
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[ 0.000000] Linux version 6.1.0-rpi7-rpi-2712 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.1.63-1+rpt1 (2023-11-24)
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000018000000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 14 pages/cpu s177448 r8192 d43736 u229376
[ 0.000000] pcpu-alloc: s177448 r8192 d43736 u229376 alloc=14*16384
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521728
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=D8:3A:DD:D0:72:20 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=0d0ceb6a-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=US nvme_core.default_ps_max_latency_us=0 pcie_aspm=off
[ 0.000000] PCIe ASPM is disabled
[ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
[ 0.000000] Memory: 7894048K/8380416K available (12352K kernel code, 2186K rwdata, 4112K rodata, 4480K init, 1216K bss, 158688K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 40061 entries in 40 pages
[ 0.000000] ftrace: allocated 40 pages with 2 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000156] Console: colour dummy device 80x25
[ 0.000176] printk: console [tty1] enabled
[ 0.000195] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000202] pid_max: default: 32768 minimum: 301
[ 0.000226] LSM: Security Framework initializing
[ 0.000287] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[ 0.000312] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[ 0.000726] cgroup: Disabling memory control group subsystem
[ 0.001214] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.001219] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.001260] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.001263] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.001294] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.001297] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.001377] rcu: Hierarchical SRCU implementation.
[ 0.001380] rcu: Max phase no-delay instances is 1000.
[ 0.002014] EFI services will not be available.
[ 0.002127] smp: Bringing up secondary CPUs ...
[ 0.002349] Detected PIPT I-cache on CPU1
[ 0.002398] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[ 0.002645] Detected PIPT I-cache on CPU2
[ 0.002681] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[ 0.002920] Detected PIPT I-cache on CPU3
[ 0.002953] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[ 0.002989] smp: Brought up 1 node, 4 CPUs
[ 0.002994] SMP: Total of 4 processors activated.
[ 0.002997] CPU features: detected: 32-bit EL0 Support
[ 0.003000] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.003003] CPU features: detected: Common not Private translations
[ 0.003006] CPU features: detected: CRC32 instructions
[ 0.003009] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.003011] CPU features: detected: LSE atomic instructions
[ 0.003013] CPU features: detected: Privileged Access Never
[ 0.003016] CPU features: detected: RAS Extension Support
[ 0.003019] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.003059] CPU: All CPU(s) started at EL2
[ 0.003062] alternatives: applying system-wide alternatives
[ 0.004941] devtmpfs: initialized
[ 0.007549] Enabled cp15_barrier support
[ 0.007556] Enabled setend support
[ 0.007618] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.007626] futex hash table entries: 1024 (order: 2, 65536 bytes, linear)
[ 0.008539] pinctrl core: initialized pinctrl subsystem
[ 0.008769] DMI not present or invalid.
[ 0.008960] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.010168] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.010221] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.010296] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.010320] audit: initializing netlink subsys (disabled)
[ 0.010387] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[ 0.010526] thermal_sys: Registered thermal governor 'step_wise'
[ 0.010544] cpuidle: using governor menu
[ 0.010615] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.010655] ASID allocator initialised with 32768 entries
[ 0.010959] Serial: AMBA PL011 UART driver
[ 0.012781] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[ 0.013478] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
[ 0.013513] printk: console [ttyAMA10] enabled
[ 0.020695] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-01-05T15:57:40, variant start_cd
[ 0.024697] raspberrypi-firmware soc:firmware: Firmware hash is 30cc5f3700000000000000000000000000000000
[ 0.033347] KASLR enabled
[ 0.043355] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[ 0.044428] iommu: Default domain type: Translated
[ 0.044432] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.044527] SCSI subsystem initialized
[ 0.044581] usbcore: registered new interface driver usbfs
[ 0.044591] usbcore: registered new interface driver hub
[ 0.044603] usbcore: registered new device driver usb
[ 0.044705] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.044795] pps_core: LinuxPPS API ver. 1 registered
[ 0.044798] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.044803] PTP clock support registered
[ 0.045058] vgaarb: loaded
[ 0.045202] clocksource: Switched to clocksource arch_sys_counter
[ 0.045347] VFS: Disk quotas dquot_6.6.0
[ 0.045366] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 0.045400] FS-Cache: Loaded
[ 0.045428] CacheFiles: Loaded
[ 0.046841] NET: Registered PF_INET protocol family
[ 0.047010] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear)
[ 0.049437] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear)
[ 0.049484] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear)
[ 0.049490] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear)
[ 0.049761] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear)
[ 0.051523] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.051670] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear)
[ 0.051786] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear)
[ 0.051887] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear)
[ 0.052041] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.052218] RPC: Registered named UNIX socket transport module.
[ 0.052221] RPC: Registered udp transport module.
[ 0.052224] RPC: Registered tcp transport module.
[ 0.052226] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.052231] PCI: CLS 0 bytes, default 64
[ 0.052403] Trying to unpack rootfs image as initramfs...
[ 0.052765] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[ 0.052922] kvm [1]: IPA Size Limit: 40 bits
[ 0.052950] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
[ 0.053007] kvm [1]: vgic interrupt IRQ9
[ 0.053060] kvm [1]: VHE mode initialized successfully
[ 0.304963] Freeing initrd memory: 16704K
[ 0.339003] Initialise system trusted keyrings
[ 0.339147] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.340910] zbud: loaded
[ 0.341464] NFS: Registering the id_resolver key type
[ 0.341474] Key type id_resolver registered
[ 0.341477] Key type id_legacy registered
[ 0.341497] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.341501] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.341565] F2FS not supported on PAGE_SIZE(16384) != 4096
[ 0.341653] Key type asymmetric registered
[ 0.341656] Asymmetric key parser 'x509' registered
[ 0.341680] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.341729] io scheduler mq-deadline registered
[ 0.341734] io scheduler kyber registered
[ 0.342340] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 31)
[ 0.342483] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 32)
[ 0.342595] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 33)
[ 0.342707] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 34)
[ 0.342818] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 35)
[ 0.342930] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 36)
[ 0.344567] gpio-461 (RP1 RUN pin): hogged as output/high
[ 0.345313] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes
[ 0.345318] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
[ 0.345458] Console: switching to colour frame buffer device 240x67
[ 0.346979] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered!
[ 0.380524] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.381110] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 38, base_baud = 6000000) is a 16550A
[ 0.381158] serial serial0: tty port ttyS0 registered
[ 0.381719] iproc-rng200 107d208000.rng: hwrng registered
[ 0.381856] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[ 0.382558] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[ 0.384530] brd: module loaded
[ 0.386046] loop: module loaded
[ 0.386276] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 0.386470] Loading iSCSI transport class v2.0-870.
[ 0.387527] usbcore: registered new interface driver r8152
[ 0.387541] usbcore: registered new interface driver lan78xx
[ 0.387551] usbcore: registered new interface driver smsc95xx
[ 0.387694] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.387771] dwc_otg: FIQ enabled
[ 0.387774] dwc_otg: NAK holdoff enabled
[ 0.387777] dwc_otg: FIQ split-transaction FSM enabled
[ 0.387781] Module dwc_common_port init
[ 0.388044] usbcore: registered new interface driver uas
[ 0.388057] usbcore: registered new interface driver usb-storage
[ 0.388253] mousedev: PS/2 mouse device common for all mice
[ 0.396133] rpi-rtc soc:rpi_rtc: registered as rtc0
[ 0.397605] rpi-rtc soc:rpi_rtc: setting system clock to 2024-01-26T20:18:16 UTC (1706300296)
[ 0.398281] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[ 0.398285] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.400922] sdhci: Secure Digital Host Controller Interface driver
[ 0.400926] sdhci: Copyright(c) Pierre Ossman
[ 0.401077] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.401518] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.401555] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.401567] hid: raw HID events driver (C) Jiri Kosina
[ 0.401593] usbcore: registered new interface driver usbhid
[ 0.401596] usbhid: USB HID core driver
[ 0.401785] NET: Registered PF_PACKET protocol family
[ 0.401817] Key type dns_resolver registered
[ 0.402068] registered taskstats version 1
[ 0.402088] Loading compiled-in X.509 certificates
[ 0.408485] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.408508] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ 0.408683] Key type .fscrypt registered
[ 0.408686] Key type fscrypt-provisioning registered
[ 0.410514] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
[ 0.410523] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff]
[ 0.410548] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000
[ 0.410561] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000
[ 0.410576] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.411770] brcm-pcie 1000110000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE
[ 0.411779] brcm-pcie 1000110000.pcie: Forcing gen 2
[ 0.411833] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00
[ 0.411836] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.411841] pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb])
[ 0.411845] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 0.411863] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[ 0.411922] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.412930] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.517207] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC)
[ 0.517238] pci 0000:01:00.0: [10ec:5762] type 00 class 0x010802
[ 0.517265] pci 0000:01:00.0: reg 0x10: [mem 0x1b00000000-0x1b00003fff 64bit]
[ 0.517298] pci 0000:01:00.0: reg 0x24: [mem 0x1b00000000-0x1b00001fff]
[ 0.517473] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.517584] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.517595] pci 0000:00:00.0: BAR 8: assigned [mem 0x1b00000000-0x1b000fffff]
[ 0.517601] pci 0000:01:00.0: BAR 0: assigned [mem 0x1b00000000-0x1b00003fff 64bit]
[ 0.517615] pci 0000:01:00.0: BAR 5: assigned [mem 0x1b00004000-0x1b00005fff]
[ 0.517622] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.517626] pci 0000:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff]
[ 0.517635] pci 0000:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 0.517647] pci 0000:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 0.517741] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 0.517795] pcieport 0000:00:00.0: PME: Signaling with IRQ 39
[ 0.517870] pcieport 0000:00:00.0: AER: enabled with IRQ 39
[ 0.518063] nvme nvme0: pci function 0000:01:00.0
[ 0.518081] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[ 0.518093] brcm-pcie 1000110000.pcie: clkreq control enabled
[ 0.518242] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[ 0.518248] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]
[ 0.518270] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 0.518283] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 0.518306] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 0.518320] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.519402] brcm-pcie 1000120000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE
[ 0.519412] brcm-pcie 1000120000.pcie: Forcing gen 2
[ 0.519451] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00
[ 0.519455] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.519459] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 0.519463] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 0.519479] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400
[ 0.519533] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 0.520437] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.540428] nvme nvme0: allocated 64 MiB host memory buffer.
[ 0.545789] nvme nvme0: 4/0/0 default/read/poll queues
[ 0.552009] nvme nvme0: Ignoring bogus Namespace Identifiers
[ 0.552879] nvme0n1: p1 p2
[ 0.625214] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 0.625241] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000
[ 0.625260] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[ 0.625270] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[ 0.625280] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[ 0.625370] pci 0001:01:00.0: supports D1
[ 0.625373] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.625474] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.625485] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
[ 0.625490] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[ 0.625496] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[ 0.625502] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[ 0.625509] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.625513] pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
[ 0.625522] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 0.625533] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 0.625649] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[ 0.625693] pcieport 0001:00:00.0: PME: Signaling with IRQ 45
[ 0.625766] pcieport 0001:00:00.0: AER: enabled with IRQ 45
[ 0.625917] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[ 0.625922] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[ 0.625930] rp1 0001:01:00.0: enabling device (0000 -> 0002)
[ 0.626807] rp1 0001:01:00.0: chip_id 0x20001927
[ 0.649260] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 113 (d8:3a:dd:d0:72:20)
[ 0.650027] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[ 0.709317] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 0.709326] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[ 0.709770] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810
[ 0.709787] xhci-hcd xhci-hcd.0: irq 138, io mem 0x1f00200000
[ 0.709862] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 0.709867] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[ 0.709871] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[ 0.709959] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.709964] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.709968] usb usb1: Product: xHCI Host Controller
[ 0.709971] usb usb1: Manufacturer: Linux 6.1.0-rpi7-rpi-2712 xhci-hcd
[ 0.709974] usb usb1: SerialNumber: xhci-hcd.0
[ 0.710123] hub 1-0:1.0: USB hub found
[ 0.710137] hub 1-0:1.0: 2 ports detected
[ 0.710340] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 0.710345] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.710348] usb usb2: Product: xHCI Host Controller
[ 0.710351] usb usb2: Manufacturer: Linux 6.1.0-rpi7-rpi-2712 xhci-hcd
[ 0.710354] usb usb2: SerialNumber: xhci-hcd.0
[ 0.710471] hub 2-0:1.0: USB hub found
[ 0.710483] hub 2-0:1.0: 1 port detected
[ 0.769312] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 0.769319] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[ 0.769760] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810
[ 0.769776] xhci-hcd xhci-hcd.1: irq 143, io mem 0x1f00300000
[ 0.769847] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 0.769851] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[ 0.769855] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[ 0.769934] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.769938] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.769941] usb usb3: Product: xHCI Host Controller
[ 0.769944] usb usb3: Manufacturer: Linux 6.1.0-rpi7-rpi-2712 xhci-hcd
[ 0.769947] usb usb3: SerialNumber: xhci-hcd.1
[ 0.770065] hub 3-0:1.0: USB hub found
[ 0.770078] hub 3-0:1.0: 2 ports detected
[ 0.770272] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 0.770276] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.770279] usb usb4: Product: xHCI Host Controller
[ 0.770282] usb usb4: Manufacturer: Linux 6.1.0-rpi7-rpi-2712 xhci-hcd
[ 0.770285] usb usb4: SerialNumber: xhci-hcd.1
[ 0.770394] hub 4-0:1.0: USB hub found
[ 0.770406] hub 4-0:1.0: 1 port detected
[ 0.771459] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.771882] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 0.771886] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 0.771892] platform 1000800000.codec: Adding to iommu group 0
[ 0.771926] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 0.771929] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 0.771934] platform 1000880000.pisp_be: Adding to iommu group 0
[ 0.771982] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 0.771985] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 0.771994] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[ 0.772485] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.772844] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 0.772848] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 0.772853] platform axi:gpu: Adding to iommu group 1
[ 0.772907] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 0.772914] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[ 0.773757] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.774146] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[ 0.774810] mmc1: CQHCI version 5.10
[ 0.774841] sdhci-brcmstb 1000fff000.mmc: there is not valid maps for state default
[ 0.775110] pl011-axi 1f00030000.serial: cts_event_workaround enabled
[ 0.775143] 1f00030000.serial: ttyAMA0 at MMIO 0x1f00030000 (irq = 132, base_baud = 0) is a PL011 AXI
[ 0.775281] mmc0: CQHCI version 5.10
[ 0.776478] of_cfs_init
[ 0.776512] of_cfs_init: OK
[ 0.811102] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[ 0.963747] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[ 0.965235] usb 1-2: new low-speed USB device number 2 using xhci-hcd
[ 0.966632] Freeing unused kernel memory: 4480K
[ 0.966682] Run /init as init process
[ 0.966685] with arguments:
[ 0.966688] /init
[ 0.966690] splash
[ 0.966693] with environment:
[ 0.966695] HOME=/
[ 0.966697] TERM=linux
[ 0.994557] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[ 1.029267] usb 3-1: new low-speed USB device number 2 using xhci-hcd
[ 1.118453] usb 1-2: New USB device found, idVendor=046d, idProduct=c050, bcdDevice=27.20
[ 1.118465] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.118469] usb 1-2: Product: USB-PS/2 Optical Mouse
[ 1.118473] usb 1-2: Manufacturer: Logitech
[ 1.130462] input: pwr_button as /devices/platform/pwr_button/input/input0
[ 1.158093] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-2/1-2:1.0/0003:046D:C050.0001/input/input1
[ 1.162427] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-xhci-hcd.0-2/input0
[ 1.172111] brcmstb-i2c 107d508200.i2c: @200000hz registered in interrupt mode
[ 1.199937] brcmstb-i2c 107d508280.i2c: @200000hz registered in interrupt mode
[ 1.240089] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
[ 1.265408] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 1.266702] Console: switching to colour dummy device 80x25
[ 1.269059] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[ 1.272867] Registered IR keymap rc-cec
[ 1.272919] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
[ 1.272968] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input2
[ 1.274673] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[ 1.277059] Registered IR keymap rc-cec
[ 1.277102] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
[ 1.277144] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input3
[ 1.278688] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[ 1.278840] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[ 1.278930] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[ 1.279021] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 1.279106] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 1.325890] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
[ 1.380372] Console: switching to colour frame buffer device 240x67
[ 1.398650] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device
[ 1.886091] usb 3-1: New USB device found, idVendor=16c0, idProduct=27db, bcdDevice= 1.00
[ 1.886100] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.886104] usb 3-1: Product: DigiKey
[ 1.886107] usb 3-1: Manufacturer: digistump.com
[ 1.961985] input: digistump.com DigiKey as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-1/3-1:1.0/0003:16C0:27DB.0002/input/input4
[ 2.021296] hid-generic 0003:16C0:27DB.0002: input,hidraw1: USB HID v1.01 Keyboard [digistump.com DigiKey] on usb-xhci-hcd.1-1/input0
[ 2.149206] usb 3-2: new low-speed USB device number 3 using xhci-hcd
[ 2.321107] usb 3-2: New USB device found, idVendor=04d9, idProduct=a0ce, bcdDevice= 4.07
[ 2.321112] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.321116] usb 3-2: Product: ES-87
[ 2.321119] usb 3-2: Manufacturer: Keyed Up Labs
[ 2.357285] input: Keyed Up Labs ES-87 as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.0/0003:04D9:A0CE.0003/input/input5
[ 2.417353] hid-generic 0003:04D9:A0CE.0003: input,hidraw2: USB HID v1.10 Keyboard [Keyed Up Labs ES-87] on usb-xhci-hcd.1-2/input0
[ 2.429323] input: Keyed Up Labs ES-87 Keyboard as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2:1.1/0003:04D9:A0CE.0004/input/input6
[ 2.489276] hid-generic 0003:04D9:A0CE.0004: input,hidraw3: USB HID v1.10 Keyboard [Keyed Up Labs ES-87] on usb-xhci-hcd.1-2/input1
[ 3.628978] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 3.762748] NET: Registered PF_INET6 protocol family
[ 3.763186] Segment Routing with IPv6
[ 3.763195] In-situ OAM (IOAM) with IPv6
[ 3.777433] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 3.777447] systemd[1]: Detected architecture arm64.
[ 3.778309] systemd[1]: Hostname set to <rpi5>.
[ 3.831587] uart-pl011 107d001000.serial: no DMA platform data
[ 3.992652] systemd[1]: Queued start job for default target graphical.target.
[ 4.013233] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 4.013978] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 4.014806] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 4.015153] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 4.017458] systemd[1]: Created slice user.slice - User and Session Slice.
[ 4.017611] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 4.017892] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 4.017976] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 4.018034] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 4.018069] systemd[1]: Reached target slices.target - Slice Units.
[ 4.018101] systemd[1]: Reached target swap.target - Swaps.
[ 4.018138] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 4.018353] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 4.018445] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 4.018872] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 4.019127] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 4.019432] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 4.020258] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 4.020456] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 4.020779] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 4.022291] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 4.023794] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 4.026192] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 4.026409] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 4.028137] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 4.029826] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 4.031496] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 4.033921] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
[ 4.035855] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 4.037998] systemd[1]: Starting [email protected] - Load Kernel Module drm...
[ 4.040138] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 4.042026] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
[ 4.044038] systemd[1]: Starting [email protected] - Load Kernel Module loop...
[ 4.044347] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 4.051433] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 4.053232] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
[ 4.054202] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 4.055951] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 4.057995] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 4.062198] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 4.062639] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 4.062992] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 4.063265] fuse: init (API version 7.37)
[ 4.065183] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[ 4.069660] i2c_dev: i2c /dev entries driver
[ 4.075022] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 4.075716] systemd[1]: [email protected]: Deactivated successfully.
[ 4.075927] systemd[1]: Finished [email protected] - Load Kernel Module configfs.
[ 4.076617] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 4.076810] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 4.078153] systemd[1]: [email protected]: Deactivated successfully.
[ 4.078490] systemd[1]: Finished [email protected] - Load Kernel Module drm.
[ 4.079054] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 4.079269] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 4.079821] systemd[1]: [email protected]: Deactivated successfully.
[ 4.080021] systemd[1]: Finished [email protected] - Load Kernel Module fuse.
[ 4.080491] systemd[1]: [email protected]: Deactivated successfully.
[ 4.080667] systemd[1]: Finished [email protected] - Load Kernel Module loop.
[ 4.081045] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 4.082928] EXT4-fs (nvme0n1p2): re-mounted. Quota mode: none.
[ 4.097842] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 4.099324] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 4.099553] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 4.101016] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 4.103927] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 4.104376] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 4.104633] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 4.104688] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 4.106573] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 4.109684] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 4.136912] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 4.137468] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[ 4.137863] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 4.150277] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 4.157670] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 4.185611] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 4.185838] systemd[1]: Started systemd-journald.service - Journal Service.
[ 4.197494] systemd-journald[325]: Received client request to flush runtime journal.
[ 4.581948] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[ 4.599614] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[ 4.602796] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[ 4.621556] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[ 4.621679] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[ 4.625318] mc: Linux media interface: v0.10
[ 4.629021] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[ 4.629139] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[ 4.643270] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[ 4.643638] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[ 4.643724] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[ 4.687210] videodev: Linux video capture interface: v2.00
[ 4.784535] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 4.791192] pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700
[ 4.791202] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000
[ 4.791205] pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000
[ 4.791209] pispbe 1000880000.pisp_be: Register nodes for group 0
[ 4.791333] pispbe 1000880000.pisp_be: input device node registered as /dev/video20
[ 4.791396] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21
[ 4.791457] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22
[ 4.791514] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23
[ 4.791578] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24
[ 4.791637] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25
[ 4.791694] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26
[ 4.791757] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27
[ 4.791816] pispbe 1000880000.pisp_be: config device node registered as /dev/video28
[ 4.792159] pispbe 1000880000.pisp_be: Register nodes for group 1
[ 4.792236] pispbe 1000880000.pisp_be: input device node registered as /dev/video29
[ 4.792296] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30
[ 4.792354] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31
[ 4.792414] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32
[ 4.792475] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33
[ 4.792536] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34
[ 4.792613] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35
[ 4.792756] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36
[ 4.799414] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.810930] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.811290] cfg80211: Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 4.811621] cfg80211: Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 4.811940] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.814698] pispbe 1000880000.pisp_be: config device node registered as /dev/video37
[ 4.834048] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 4.854868] rpivid 1000800000.codec: Device registered as /dev/video19
[ 4.861336] Bluetooth: Core ver 2.22
[ 4.861384] NET: Registered PF_BLUETOOTH protocol family
[ 4.861388] Bluetooth: HCI device and connection manager initialized
[ 4.861397] Bluetooth: HCI socket layer initialized
[ 4.861402] Bluetooth: L2CAP socket layer initialized
[ 4.861412] Bluetooth: SCO socket layer initialized
[ 4.872500] Bluetooth: HCI UART driver ver 2.3
[ 4.872513] Bluetooth: HCI UART protocol H4 registered
[ 4.872561] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 4.872684] Bluetooth: HCI UART protocol Broadcom registered
[ 4.878826] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 4.878951] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 4.892051] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 4.895535] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.905825] usbcore: registered new interface driver brcmfmac
[ 5.051463] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
[ 5.249319] Bluetooth: hci0: BCM: chip id 107
[ 5.249607] Bluetooth: hci0: BCM: features 0x2f
[ 5.250779] Bluetooth: hci0: BCM4345C0
[ 5.250787] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 5.251243] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
[ 5.456647] Adding 102384k swap on /var/swap. Priority:-2 extents:2 across:16617456k SSFS
[ 5.812804] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[ 5.812818] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 5.815945] pps pps0: new PPS source ptp0
[ 5.816002] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[ 5.848699] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 6.029879] Bluetooth: hci0: BCM: features 0x2f
[ 6.031268] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 6.031272] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 6.031611] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[ 6.127727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.127747] Bluetooth: BNEP filters: protocol multicast
[ 6.127762] Bluetooth: BNEP socket layer initialized
[ 6.131357] Bluetooth: MGMT ver 1.22
[ 6.142771] NET: Registered PF_ALG protocol family
[ 11.528703] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 41.709274] nvme nvme0: controller is down; will reset: CSTS=0xffffffff, PCI_STATUS=0x10
[ 41.709282] nvme nvme0: Does your device have a faulty power saving mode enabled?
[ 41.709285] nvme nvme0: Try "nvme_core.default_ps_max_latency_us=0 pcie_aspm=off" and report a bug
[ 41.741365] nvme0n1: I/O Cmd(0x2) @ LBA 2680847368, 160 blocks, I/O Error (sct 0x3 / sc 0x71)
[ 41.741373] I/O error, dev nvme0n1, sector 2680847368 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 41.741390] nvme0n1: I/O Cmd(0x2) @ LBA 2794696720, 192 blocks, I/O Error (sct 0x3 / sc 0x71)
[ 41.741395] I/O error, dev nvme0n1, sector 2794696720 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 41.741704] nvme0n1: I/O Cmd(0x2) @ LBA 977889280, 96 blocks, I/O Error (sct 0x3 / sc 0x71)
[ 41.741708] I/O error, dev nvme0n1, sector 977889280 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 2
[ 41.741720] nvme0n1: I/O Cmd(0x2) @ LBA 2677641496, 8 blocks, I/O Error (sct 0x3 / sc 0x71)
[ 41.741724] I/O error, dev nvme0n1, sector 2677641496 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 41.757344] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[ 41.776258] nvme nvme0: 4/0/0 default/read/poll queues
[ 41.800639] nvme nvme0: Ignoring bogus Namespace Identifiers
[ 45.875007] Bluetooth: RFCOMM TTY layer initialized
[ 45.875028] Bluetooth: RFCOMM socket layer initialized
[ 45.875043] Bluetooth: RFCOMM ver 1.11
[ 49.182943] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 49.182958] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 49.182961] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 49.182965] pcieport 0000:00:00.0: [12] Timeout
[ 49.971745] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 49.971759] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 49.971762] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 49.971765] pcieport 0000:00:00.0: [12] Timeout
[ 49.971772] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 49.971790] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 49.971792] nvme 0000:01:00.0: device [10ec:5762] error status/mask=000030c1/00006000
[ 49.971795] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 49.971798] nvme 0000:01:00.0: [ 6] BadTLP
[ 49.971800] nvme 0000:01:00.0: [ 7] BadDLLP
[ 49.971802] nvme 0000:01:00.0: [12] Timeout
[ 178.519318] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 178.519360] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 178.519365] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 178.519370] pcieport 0000:00:00.0: [12] Timeout
[ 178.551346] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 178.551359] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 178.551362] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 178.551365] pcieport 0000:00:00.0: [12] Timeout
[ 179.333183] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.333197] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.333201] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 179.333204] pcieport 0000:00:00.0: [12] Timeout
[ 179.333210] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.333224] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 179.333226] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00001081/00006000
[ 179.333229] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 179.333232] nvme 0000:01:00.0: [ 7] BadDLLP
[ 179.333234] nvme 0000:01:00.0: [12] Timeout
[ 179.333922] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.333932] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.333934] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 179.333938] pcieport 0000:00:00.0: [12] Timeout
[ 179.333943] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.333957] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 179.333959] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00000041/00006000
[ 179.333961] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 179.333964] nvme 0000:01:00.0: [ 6] BadTLP
[ 179.334129] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.334135] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.334137] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 179.334140] pcieport 0000:00:00.0: [12] Timeout
[ 179.891358] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.891372] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.891375] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 179.891378] pcieport 0000:00:00.0: [12] Timeout
[ 179.891384] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.891398] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 179.891401] nvme 0000:01:00.0: device [10ec:5762] error status/mask=000010c1/00006000
[ 179.891403] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 179.891406] nvme 0000:01:00.0: [ 6] BadTLP
[ 179.891408] nvme 0000:01:00.0: [ 7] BadDLLP
[ 179.891410] nvme 0000:01:00.0: [12] Timeout
[ 179.894983] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.894994] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.894997] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 179.895000] pcieport 0000:00:00.0: [12] Timeout
[ 179.895005] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.895019] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 179.895021] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00000001/00006000
[ 179.895023] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 179.913106] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.913121] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.913125] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 179.913128] pcieport 0000:00:00.0: [12] Timeout
[ 179.913134] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.913148] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 179.913150] nvme 0000:01:00.0: device [10ec:5762] error status/mask=000010c1/00006000
[ 179.913153] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 179.913156] nvme 0000:01:00.0: [ 6] BadTLP
[ 179.913158] nvme 0000:01:00.0: [ 7] BadDLLP
[ 179.913161] nvme 0000:01:00.0: [12] Timeout
[ 179.913172] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.913181] pcieport 0000:00:00.0: AER: can't find device of ID0000
[ 179.925995] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.926009] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.926012] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 179.926015] pcieport 0000:00:00.0: [12] Timeout
[ 179.926330] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.926338] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.926340] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 179.926342] pcieport 0000:00:00.0: [12] Timeout
[ 179.927019] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.927033] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.927036] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001140/00002000
[ 179.927038] pcieport 0000:00:00.0: [ 6] BadTLP
[ 179.927041] pcieport 0000:00:00.0: [ 8] Rollover
[ 179.927044] pcieport 0000:00:00.0: [12] Timeout
[ 179.927048] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.927060] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 179.927063] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00000041/00006000
[ 179.927065] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 179.927068] nvme 0000:01:00.0: [ 6] BadTLP
[ 179.927076] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0
[ 179.927084] pcieport 0000:00:00.0: AER: can't find device of ID0000
[ 179.927087] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.927094] pcieport 0000:00:00.0: AER: can't find device of ID0000
[ 179.927096] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.927108] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 179.927110] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00000001/00006000
[ 179.927112] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 179.927121] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.927132] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 179.927135] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00000001/00006000
[ 179.927137] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 179.927156] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.927161] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.927163] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 179.927165] pcieport 0000:00:00.0: [12] Timeout
[ 179.927169] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.927179] pcieport 0000:00:00.0: AER: can't find device of ID0000
[ 179.939151] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 179.939177] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 179.939183] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 179.939188] pcieport 0000:00:00.0: [12] Timeout
[ 180.611417] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0
[ 180.611444] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 180.611447] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 180.611451] pcieport 0000:00:00.0: [12] Timeout
[ 180.611460] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 180.611464] nvme 0000:01:00.0: device [10ec:5762] error status/mask=000010c1/00006000
[ 180.611468] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 180.611471] nvme 0000:01:00.0: [ 6] BadTLP
[ 180.611473] nvme 0000:01:00.0: [ 7] BadDLLP
[ 180.611475] nvme 0000:01:00.0: [12] Timeout
[ 180.611488] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 180.611498] pcieport 0000:00:00.0: AER: can't find device of ID0000
[ 225.957197] pcieport 0000:00:00.0: AER: Multiple Corrected error received: 0000:00:00.0
[ 225.957216] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Receiver ID)
[ 225.957219] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00000040/00002000
[ 225.957223] pcieport 0000:00:00.0: [ 6] BadTLP
[ 225.957229] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 225.957231] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00001081/00006000
[ 225.957234] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 225.957236] nvme 0000:01:00.0: [ 7] BadDLLP
[ 225.957239] nvme 0000:01:00.0: [12] Timeout
[ 227.998121] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 227.998137] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 227.998142] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 227.998146] pcieport 0000:00:00.0: [12] Timeout
[ 227.998153] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 227.998170] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Transmitter ID)
[ 227.998173] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00001081/00006000
[ 227.998177] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 227.998181] nvme 0000:01:00.0: [ 7] BadDLLP
[ 227.998184] nvme 0000:01:00.0: [12] Timeout
[ 227.998208] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 227.998213] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 227.998217] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 227.998220] pcieport 0000:00:00.0: [12] Timeout
[ 227.998227] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 227.998239] nvme 0000:01:00.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
[ 227.998243] nvme 0000:01:00.0: device [10ec:5762] error status/mask=00000001/00006000
[ 227.998246] nvme 0000:01:00.0: [ 0] RxErr (First)
[ 243.163183] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0
[ 243.163197] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
[ 243.163201] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000
[ 243.163205] pcieport 0000:00:00.0: [12] Timeout
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment