Lomraig lomraig

Here is the best setup (I think so :D) for K-series Keychron keyboards on Linux.

Note: many newer Keychron keyboards use QMK as firmware and most tips here do not apply to them. Maybe the ones related to Bluetooth can be useful, but everything related to Apple's keyboard module (hid_apple) on Linux, won't work. As far as I know, all QMK-based boards use the hid_generic module instead. Examples of QMK-based boards are: Q, Q-Pro, V, K-Pro, etc.

Most of these commands have been tested on Ubuntu 20.04 and should also work on most Debian-based distributions. If a command happens not to work for you, take a look in the comment section.

Make Fn + F-keys work (NOT FOR QMK-BASED BOARDS)

Older Keychron keyboards (those not based on QMK) use the hid_apple driver on Linux, even in the Windows/Android mode, both in Bluetooth and Wired modes.

	function pom
	set split $POMO_SPLIT
	if ! test -n "$split"
	set split $(gum choose "25/5" "50/10" "all done" --header "Choose a pomodoro split.")
	end

	switch $split
	case 25/5
	set work 25m
	set break 5m

	# I'll be doing another one for Linux, but this one will give you
	# a pop up notification and sound alert (using the built-in sounds for macOS)

	# Requires https://github.com/caarlos0/timer to be installed

	# Mac setup for pomo
	alias work="timer 60m && terminal-notifier -message 'Pomodoro'\
	-title 'Work Timer is up! Take a Break 😊'\
	-appIcon '~/Pictures/pumpkin.png'\
	-sound Crystal"

	#!/bin/bash

	# README: A more updated version is on the comments by (ashmna)[https://gist.github.com/ashmna]
	# See at: https://gist.github.com/allangarcia/938b052a7d55d1652052e4259364260b?permalink_comment_id=4265898#gistcomment-4265898

	# this is for tools required
	brew update
	brew install ninja
	brew install cmake