Booting `Ubuntu Server Bionic 18.04 (Hikey 970 CE)'

EFI stub: Booting Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied
EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.78-147541-g16035b0edcf4 (root@test) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #10 SMP PREEMPT Mon Sep 3 13:30:24 UTC 2018
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '115200')
[ 0.000000] bootconsole [pl11] enabled
[ 0.000000] Ion: insert heap-name carveout_gralloc
[ 0.031935] /soc/interrupt-controller@0xf4000000: Unable to locate ITS domain
[ 0.039252] /soc/interrupt-controller@0xf4000000: unable to locate ITS domain
[ 0.393205] dmi: Firmware registration failed.
[ 0.397839] Ion: invalid heap-name in node iommu_info, please check the name
[ 0.405005] Ion: invalid heap-name in node linear, please check the name
[ 0.411802] Ion: node name [heap_sys_user], heap-name [sys_heap]
[ 0.417808] Ion: heap index 0 : name sys_heap base 0x0 size 0x0 id 0 type 0
[ 0.424770] Ion: heap sys_heap base =0, try to find dynamic area
[ 0.430860] Ion: name = sys_heap, table name carveout_gralloc
[ 0.436688] Ion: name = sys_heap, table name
[ 0.441127] Ion: name = sys_heap, table name
[ 0.445564] Ion: name = sys_heap, table name
[ 0.450004] Ion: name = sys_heap, table name
[ 0.454448] Ion: node name [heap_carveout_gralloc], heap-name [carveout_gralloc]
[ 0.461843] Ion: heap index 1 : name carveout_gralloc base 0x0 size 0x0 id 2 type 2
[ 0.469493] Ion: heap carveout_gralloc base =0, try to find dynamic area
[ 0.476277] Ion: name = carveout_gralloc, table name carveout_gralloc
[ 0.482799] Ion: have found heap name carveout_gralloc base = 0xbc800000, size 31457280
[ 0.490815] of_get_iova_info:start_addr 0x40000, size 0xbffc0000 align 0x8000
[ 0.502267] no hisilicon,hisi-pmic-irq-num1 property set
[ 0.507579] hisi_pmic 2-00: the platform don't support ext-interrupt.
[ 0.519126] <[hisi_dt_parse_ip_atf]: regulator_id=0, ppll0_clock_set_rate_flag=0>
[ 0.526748] <[hisi_dt_parse_ip_atf]: regulator_id=1, ppll0_clock_set_rate_flag=0>
[ 0.534287] <[hisi_ip_to_atf_is_enabled]:regulator_id=1>
[ 0.539696] <[hisi_dt_parse_ip_atf]: regulator_id=8, ppll0_clock_set_rate_flag=0>
[ 0.547292] <[hisi_dt_parse_ip_atf]: regulator_id=2, ppll0_clock_set_rate_flag=0>
[ 0.554806] <[hisi_ip_to_atf_is_enabled]:regulator_id=2>
[ 0.560209] <[hisi_dt_parse_ip_atf]: regulator_id=3, ppll0_clock_set_rate_flag=0>
[ 0.567721] <[hisi_ip_to_atf_is_enabled]:regulator_id=3>
[ 0.573140] <[hisi_dt_parse_ip_atf]: regulator_id=4, ppll0_clock_set_rate_flag=0>
[ 0.580651] <[hisi_ip_to_atf_is_enabled]:regulator_id=4>
[ 0.586057] <[hisi_dt_parse_ip_atf]: regulator_id=5, ppll0_clock_set_rate_flag=0>
[ 0.593568] <[hisi_ip_to_atf_is_enabled]:regulator_id=5>
[ 0.598973] <[hisi_dt_parse_ip_atf]: regulator_id=6, ppll0_clock_set_rate_flag=0>
[ 0.606487] <[hisi_ip_to_atf_is_enabled]:regulator_id=6>
[ 0.611906] <[hisi_dt_parse_ip_atf]: regulator_id=7, ppll0_clock_set_rate_flag=0>
[ 0.619419] <[hisi_ip_to_atf_is_enabled]:regulator_id=7>
[ 0.635457] Kirin-pcie f4000000.pcie: eye_param_vboost = [0xffffffff]
[ 0.641907] Kirin-pcie f4000000.pcie: eye_param_iboost = [0xffffffff]
[ 0.648347] Kirin-pcie f4000000.pcie: eye_param_pre = [0xffffffff]
[ 0.654532] Kirin-pcie f4000000.pcie: eye_param_post = [0xffffffff]
[ 0.660797] Kirin-pcie f4000000.pcie: eye_param_main = [0xffffffff]
[ 0.767871] ion domain already init return domain
[ 0.772706] [drm:drm_helper_disable_unused_functions] ERROR Called for atomic driver, this is not what you want.
[ 0.984601] [drm:adv7511_detect.isra.2] ERROR Read connector status timout, time = 10
[ 1.112342] gpio_hub_power_on:regulator_enable
[ 1.172545] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
[ 1.179938] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
[ 1.187331] [E/hisi_pd] typec_unattached_power_entry:!!!+++++++++++
[ 1.193832] [E/hisi_pd] tcpci_disable_vbus_control: !!!++++++++
[ 1.199749] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=0,+++
[ 1.205577] [E/hisi_pd] typec_unattached_power_entry:!!!-----------
[ 1.212107] ufshcd-hisi ff3c0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[ 1.258460] hisi_thermal fff30000.tsensor: THERMAL ALARM: 66032 > 65000
[ 1.275691] hisi_thermal fff30000.tsensor: THERMAL ALARM stopped: 59768 < 65000
[ 1.411467] hifi pdev name[hifidsp].
[ 1.415134] DRV_IPCIntInit begin.
[ 1.418442] DRV_IPCIntInit line = 220
[ 1.422144] BSP_DRV_IPCIntInit end.
[ 1.425841] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
[ 1.440331] of_get_iova_info:start_addr 0x40000, size 0x80000000 align 0x40000
[ 1.447638] IFO:<493:VENC_DRV_ModInit>enter VENC_DRV_ModInit()
[ 1.447638]
[ 1.455255] IFO:<429:VENC_DRV_Probe>omxvenc prepare to probe
[ 1.455255]
[ 1.462497] IFO:<368:VENC_DRV_SetupCdev>enter VENC_DRV_SetupCdev()
[ 1.462497]
[ 1.470341] IFO:<399:VENC_DRV_SetupCdev>exit VENC_DRV_SetupCdev()
[ 1.470341]
[ 1.478007] ion domain already init return domain
[ 1.482746] IFO:<131:Venc_GetDtsConfigInfo>venc_clk_rate: highRate:554000000, normalRate:450000000, lowRate:238000000
[ 1.482746]
[ 1.494919] ERR:<137:Venc_GetDtsConfigInfo>get venc qos mode failed set default
[ 1.494919]
[ 1.503789] IFO:<143:Venc_GetDtsConfigInfo>SmmuPageBaseAddr is 0xffff000008dfe310
[ 1.503789]
[ 1.512839] IFO:<458:VENC_DRV_Probe>omxvenc probe successfully
[ 1.512839]
[ 1.520257] IFO:<429:VENC_DRV_Probe>omxvenc prepare to probe
[ 1.520257]
[ 1.527476] IFO:<432:VENC_DRV_Probe>venc device detected already
[ 1.527476]
[ 1.535054] IFO:<506:VENC_DRV_ModInit>success
[ 1.535054]
[ 1.540970] IFO:<510:VENC_DRV_ModInit>exit VENC_DRV_ModInit()
[ 1.540970]
[ 1.548716] ion domain already init return domain
[ 1.817676] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
[ 1.824059] [ISP] isp_i2c_xfer: I2C abort
[ 1.828076] [ISP] isp_i2c_write_reg: write reg fail
[ 1.832958] [ISP] ov5640_main_power: could not set init registers
[ 1.839058] [ISP] isp_i2c_read_reg: read[0x300a]
[ 1.846693] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
[ 1.853058] [ISP] isp_i2c_xfer: I2C abort
[ 1.857069] [ISP] isp_i2c_read_reg: read reg fail[ 1.861599] [ISP] ov5640_main_get_chip_id: get chip id high[255] fail
[ 1.868060] [ISP] ov5640_main_probe: chip id is 0x0
[ 1.872943] [ISP] ov5640_main_probe: chip id is 0x0, probe failed
[ 2.129657] [ISP] isp_i2c_read_clear_intrbits: ABRT_SOURCE 0x1000001
[ 2.136011] [ISP] isp_i2c_xfer: I2C abort
[ 2.140015] [ISP] isp_i2c_write_reg: write reg fail
[ 2.144887] [ISP] ov5640_sub_power: could not set init registers