mdolnik · January 12, 2025 19:24 · JOHLC · Jan 7, 2023 · boggsdabeast · Apr 3, 2023
diff --git a/color_loop.yaml b/color_loop.yaml
 blueprint:
  name: Color Loop
  description: '# Color Loop

    ### Version: `2.0.0` (2023-04-25)

    #### Tested on Home Assistant Version: `2023.4.4`

    #### Blueprints Page: <https://community.home-assistant.io/t/427682>

    Loops through predetermined colors for a chosen light.


    Can be configured to either:

    - Loop through colors whenever the light is on.

    - Loop through colors only when both the light and a toggle switch are on.

    ## READ THIS FIRST

    **Before using this blueprint, be warned that it can put a real heavy load on
    Home Assistant and its database if configured to change colors at a quick pace.
    While these color changes do not show up in the History or the Logbook,
    they are still logged in the database unless manually configured to not do so.
    [If Home Assistant is running on an SD card on a Raspberry Pi, large amounts
    of DB changes can technically cause damage over time](https://www.reddit.com/r/homeassistant/comments/jvwtv1/friendly_reminder_dont_use_a_sd_card_on_a_pi/).
    Refer to the next section regarding solutions to mitigate this issue.
    If you do not understand these issues, this blueprint should probably be avoided.**

    <!-- For some reason we need something directly above the details tag to have it render properly -->
    <details>
      <summary><big><b><u>Click here for solutions to help avoid overloading Home Assistant</u></b></big></summary>
    <hr>

    ### Solution 1: Exclude lights from recorder:

    With that out of the way need a solution for the database spam, one solution
    that works at the moment is to literally prevent the light(s) from getting
    logged for *anything*. The following configuration could be added and
    populated with the chosen lights and the entity ID of this script.

    <code>
    <!-- Code Blocks in markdown seem to be broken, the following is a work-around -->
    recorder:

    &nbsp;&nbsp;exclude:

    &nbsp;&nbsp;&nbsp;&nbsp;entities:

    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;\# Exclude any logging of the chosen light.

    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;- light.my_light

    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;\# Exclude any logging of this color loop script.

    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;- automation.my_light_color_loop

    &nbsp;&nbsp;&nbsp;&nbsp;event_types:

    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;\# Do not record ANY service calls

    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;- call_service
    </code>

    If a light group is used in this blueprint, you should add all individual
    light entities to the exclusion above as well as the group ID.

    Refer to [Recorder Exclude Docs](https://www.home-assistant.io/integrations/recorder#exclude)

    ### Solution 2: Increase Commit Interval:

    Another solution is to increase the commit interval. By default the DB is
    written to once a second. Increasing this value will prevent the Database
    from being spammed with frequent requests.

    This will allow the lights to still be logged, but depending on how often
    this light is configured to change colors, this can end up significantly
    increasing the size of the DB.

    <code>
    <!-- Code Blocks in markdown seem to be broken, the following is a work-around -->
    recorder:

    &nbsp;&nbsp;\# Write to the DB every 15 seconds instead of once a second.

    &nbsp;&nbsp;commit_interval: 15
    </code>

    Refer to [Recorder Commit Interval Docs](https://www.home-assistant.io/integrations/recorder#commit_interval)

    ### Future solution:

    A feature request has been added to see if there is a better way to do this
    without needing to *always* exclude logging:
    [Allow an ability to call a service without any logging/recording](https://community.home-assistant.io/t/allow-an-ability-to-call-a-service-without-any-logging-recording/428693)

    <hr>
    </details>
  '
  domain: automation
  input:
    light:
      name: Light
      description: "
        The Light entity or Light Group entity to loop through the colors chosen below.
      "
      selector:
        entity:
          domain:
            - light
            - group
          multiple: false
    # TODO: If helpers are introduced to blueprints, add our own toggle so we don't have to rely on external entities.
    # Refer to https://community.home-assistant.io/t/258307
    helper_toggle:
      name: Color Loop Toggle
      description: "An ON/OFF toggle to enable/disable enable/disable the color looping for the chosen Light.

        <!-- For some reason we need something directly above the details tag to have it render properly -->
        <details>
        <summary><big><b><u>Click Here For More Info</u></b></big></summary>
          <hr>

          A single Color Loop Toggle can be used across multiple Color Loop
          automations to control multiple lights at the same time with each light
          having their own set of colors / rules.


          **If you don't want to add a separate toggle and want the light to
          _always_ loop colors _whenever it is on_ then set this value to be
          the same light entity as above.**

          ### General rules in how the toggle affects the color loop:

          - If the `Toggle` is turned `ON` while the `Light` is `ON`: `Color looping starts`.

          - If the `Toggle` is turned `OFF` while the `Light` is `ON`: `Light is set to current color and stops color-looping`.

          - If the `Toggle` is turned `ON`/`OFF` while the `Light` is `OFF`: `Nothing Happens`.

          - If the `Light` is turned `ON` while the `Toggle` is `ON`: `Light is turned on and Color looping starts`.

          - If the `Light` is turned `ON` while the `Toggle` is `OFF`: `Light is turned on and no Color Looping occurs`.

          - If the `Light` is turned `OFF` while the `Toggle` is `ON`/`OFF`: `The light turns OFF and Color Looping stops`.


        <hr>
        </details>

        <br>

        <!-- For some reason we need something directly above the details tag to have it render properly -->
        <details>
        <summary><big><b><u>Click Here For Configuration Instructions</u></b></big></summary>
          <hr>

          Configure using one of the options below.


          ### Option 1: Create Toggle via UI:

          1. Go to `Settings` > `Devices & Services` > `Helpers`.

          2. Press `+ Create Helper`.

          3. Choose `Toggle`.

          4. Add a `Name` and save.

          5. Select this new Toggle for this blueprint.


          ### Option 2: Create Toggle via YML Configuration:

          Add the following YML configuration:

          <code>
          <!-- Code Blocks in markdown seem to be broken, the following is a work-around -->
          input_boolean:

          &nbsp;&nbsp;my_color_loop_toggle:

          &nbsp;&nbsp;&nbsp;&nbsp;name: My Color Loop Toggle

          &nbsp;&nbsp;&nbsp;&nbsp;icon: mdi:palette-outline
          </code>

          Select this new Toggle for this blueprint.


          ### Option 3: Configure Color Loop to ALWAYS be running whenever the light is on:

          Set this value to be the same light entity as above.


          _Note: Light Groups are intentionally excluded from being added as a
          toggle as turning off individual lights would be problematic.
          You will need to add a toggle entity here in order to add color looping
          to groups._

        <hr>
        </details>
      "
      default:
      selector:
        entity:
          domain:
            - light
            - input_boolean
    transition:
      name: Transition Time
      description: "
        Choose the time it takes to cycle through each color.
      "
      selector:
        duration: {}
      default:
        hours: 0
        minutes: 0
        seconds: 15
    max_color_distance:
      name: Max Color Distance
      description: "
        Helps control how the colors are transitioned.

        <!-- For some reason we need something directly above the details tag to have it render properly -->
        <details>
          <summary><big><b><u>Click Here For More Info</u></b></big></summary>
            <hr>

            This value controls how colors in between the chosen colors are dynamically
            chosen in order to prevent issues where:

            - The color fades to white (or a lighter color) in between the chosen colors.

            - The color does not transition smoothly or at all.


            The color wheel uses (Hue) which are degrees (0-359) which represent
            where colors are along the curve of the wheel.


            This `Max Color Distance` value basically means the cut-off amount
            of degrees on the color wheel which should result in new in-between
            color(s) to be added.


            If these extra colors are not added, then the color transition will
            follow a straight path across the wheel, likely resulting in colors we
            don't want along the way.


            For example: If we wanted to transition from Red to Cyan which are on the opposite side of the color wheel (180 degrees apart):

            - Setting `Max Color Distance` to `180` will cause the color transition to go straight across resulting in a fade to white in between the colors.

              ![Image](https://user-images.githubusercontent.com/22206300/232822236-8cca7b37-0a72-4cbc-b198-4d1fb1dd2325.png)

            - Setting `Max Color Distance` to `90` will have a new color added every `90` degrees. In this case a new transitional color will be added at Purple.

              ![Image](https://user-images.githubusercontent.com/22206300/232822243-2a3b710b-b72f-4d5c-b4f3-e0f35374b602.png)

            - Setting `Max Color Distance` to `60` will have a new color added every `60` degrees. In this case two transitional colors will be added at Blue and Pink.

              ![Image](https://user-images.githubusercontent.com/22206300/232822244-a187e691-8c85-4266-a904-d6f179a0a0af.png)

            - Setting `Max Color Distance` to `30` will have a new color added every `30` degrees. In this case three transitional colors will be added at Red/Pink, Purple, and Blue.

              ![Image](https://user-images.githubusercontent.com/22206300/232822245-60aea03f-845e-47ec-a4a1-4602c7601717.png)

            - Setting `Max Color Distance` to `1` will have a new color added every `1` degree. In this case the light will have a command sent to change to a new color for EVERY color along the way.

              ![Image](https://user-images.githubusercontent.com/22206300/232822249-2db23295-3cde-430c-b482-be303b84f23f.png)


            <hr>
        </details>


        **For performance reasons, _keep this value as high as possible_.
        Lower numbers will result in more commands being sent to the light
        putting more burden on Home Assistant**

        <!-- For some reason we need something directly above the details tag to have it render properly -->
        <details>
          <summary><big><b><u>Click Here If You Are Unsure What Value To Set This To</u></b></big></summary>
          <hr>

          Try saving the Color Loop with `Max Color Distance` set to `180` and
          `Transition Time` set to something quick like `3 seconds`.

          - If the light fades smoothly but gets brighter/whiter between colors, then reduce `Max Color Distance` by about `60` and save. Keep doing this until the color fading is acceptable.

          - **If there is no fading at all between colors** (it jumps directly from color to color every 3 seconds) then this light does not support color transitions. You may want to choose a number between `1` - `15` depending on how close the colors are to each other and the desired `Transition Time`. This will essentially fake the color transitions by sending color-change commands to the light more often.


          <hr>
        </details>
      "
      default: 60
      selector:
        number:
          min: 1
          max: 180
    max_changes_per_second:
      name: Max Changes Per Second
      description: "
        The maximum number of commands (per second) that can be performed for color changes.

        <!-- For some reason we need something directly above the details tag to have it render properly -->
        <details>
          <summary><big><b><u>Click Here For More Info</u></b></big></summary>
            <hr>

            Without `Max Changes Per Second`, if a combination of `Transition Time`
            and `Max Color Distance` were both being set to a low value,
            it would end up resulting in WAY too many calls to the light to
            update its color (up to 180 calls per second).


            In order to avoid overloading Home Assistant, this value can be used in
            order to set a maximum limit of how many calls per second to change the
            light during transition can be made.


            Note: This being set to 1 second does not mean that it will always be
            sending commands every second. The transition times and/or how close
            the colors are to each other will cause the time between commands
            to vary quite a bit, this is basically just a speed limit.

            <hr>
        </details>


        **For performance reasons, this should be set as low as possible**,
        but with lights which do not support color transitions, this can be
        increased in order to have smoother color transitions.
      "
      default: 1
      selector:
        number:
          min: 1
          max: 5
    color_1:
      name: Color 1
      description: "
        Set to black to omit this color.

        <!-- For some reason we need something directly above the details tag to have it render properly -->
        <details>
          <summary><big><b><u>Click Here For More Info</u></b></big></summary>
            <hr>

            These are the main colors that will be looped through.


            Any colors set to black (R:0 G:0 B:0) will be omitted from the loop.


            *Note: There is no current way to re-order the chosen colors,
            you must change or remove (set to black) colors to change the order.*


            *Note: Since RGB colors do not translate well to colored lights (the
            current brightness of the light does not get changed by this script)
            the color previews may not look accurate to the final result.*

            <hr>
        </details>
      "
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_2:
      name: Color 2
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_3:
      name: Color 3
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_4:
      name: Color 4
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_5:
      name: Color 5
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_6:
      name: Color 6
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_7:
      name: Color 7
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_8:
      name: Color 8
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_9:
      name: Color 9
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_10:
      name: Color 10
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_11:
      name: Color 11
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}
    color_12:
      name: Color 12
      description: 'Set to black to omit this color'
      default:
        - 0
        - 0
        - 0
      selector:
        color_rgb: {}

 # If we trigger the color-loop while its running, restart the automation.
 mode: restart

 # Set up main variables.
 variables:
  color_loop_light: !input 'light'
  helper_toggle: !input 'helper_toggle'
  # Since we are forced to provide an entity for the `helper_toggle` input
  # (otherwise the trigger step would break) this variable is used as an
  # indicator for whether a "separate" toggle is used.
  toggle_is_used: '{{ color_loop_light != helper_toggle }}'
  # If a "separate" toggle is used, during long light transitions, we will need
  # to check every X seconds whether the toggle has switched off so that we can
  # stop the current color transition as well as this automation.
  toggle_transition_check_time: 1.5
  transition: !input 'transition'
  transition_seconds: '{{ ((transition.hours)*60*60) + ((transition.minutes)*60)
    + transition.seconds }}'
  max_color_distance: !input 'max_color_distance'
  max_changes_per_second: !input 'max_changes_per_second'
  color_rgbs:
    - !input 'color_1'
    - !input 'color_2'
    - !input 'color_3'
    - !input 'color_4'
    - !input 'color_5'
    - !input 'color_6'
    - !input 'color_7'
    - !input 'color_8'
    - !input 'color_9'
    - !input 'color_10'
    - !input 'color_11'
    - !input 'color_12'
  # Convert the array of RGB colors to a comma separated list of HSV values.
  # Exclude any colors set to black.
  # https://community.home-assistant.io/t/using-hsv-hsb-to-set-colored-lights/15472
  # https://github.com/home-assistant/core/issues/33678#issuecomment-609424851
  # https://stackoverflow.com/a/56141280/4147996
  color_hsv_list_csv: >-
    {%- set data = namespace(entries=[]) -%}
    {%- for color_rgb in color_rgbs -%}
      {%- if color_rgb != [0,0,0] -%}
        {%- set r = (color_rgb[0]/255) -%}
        {%- set g = (color_rgb[1]/255) -%}
        {%- set b = (color_rgb[2]/255) -%}
        {%- set maxRGB = max(r,g,b) -%}
        {%- set minRGB = min(r,g,b) -%}
        {%- set chroma = maxRGB - minRGB -%}
        {%- if chroma == 0 -%}
          {%- set h = 0 -%}
          {%- set s = 0 -%}
          {%- set v = maxRGB -%}
        {%- else -%}
          {%- if r == minRGB -%}
            {%- set h = 3-((g-b)/chroma) -%}
          {%- elif b == minRGB -%}
            {%- set h = 1-((r-g)/chroma) -%}
          {%- else -%}
            {%- set h = 5-((b-r)/chroma) -%}
          {%- endif -%}
          {%- set h = 60 * h -%}
          {%- set s = chroma / maxRGB -%}
          {%- set v = maxRGB -%}
        {%- endif -%}
        {%- set h = h|round(2)|string -%}
        {%- set s = s|round(2)|string -%}
        {%- set v = v|round(2)|string -%}
        {%- set comma_sep = h + "|" + s + "|" + v -%}
        {%- set data.entries = data.entries + [comma_sep] -%}
      {%- endif -%}
    {%- endfor -%}
    {{ data.entries | join(",") }}
  color_hsv_list: '{{ color_hsv_list_csv.split(",") }}'
  color_count: '{{ color_hsv_list|length }}'


 # TODO: Once we have the ability to use templates in triggers, allow `helper_toggle` to be empty so we don't have to deal with duplicate triggers by using the "same light" work-around.
 # Refer to https://community.home-assistant.io/t/261682
 trigger:
  - platform: state
    entity_id:
      - !input 'light'
    from: "off"
    to: "on"
  - platform: state
    entity_id:
      - !input 'helper_toggle'
    from: "off"
    to: "on"
  - platform: event
    event_type: automation_reloaded


 condition:
  - condition: and
    conditions:
      - condition: state
        entity_id: !input 'helper_toggle'
        state: "on"
      - condition: state
        entity_id: !input 'light'
        state: "on"
      # If the helper toggle is not used (light is same entity as toggle),
      # this ensures that we don't cause two color loops to run in a row.
      - '{{ toggle_is_used or trigger.id != "1" }}'


 action:
 - alias: Change Color
  repeat:
    while:
    - condition: and
      conditions:
        - condition: state
          entity_id: !input 'light'
          state: 'on'
        - condition: state
          entity_id: !input 'helper_toggle'
          state: 'on'
    sequence:
    - variables:
        # Total iterations so-far.
        i_total: '{{ repeat.index }}'
        # Current color index we're on.
        i_cur: '{{ (i_total - 1) % color_count }}'
        # Next color index to change to.
        i_next: '{{ i_total % color_count }}'
        # Get the H/S of current colors.
        hsv_cur_csv: '{{ color_hsv_list[i_cur] }}'
        hue_cur: '{{ hsv_cur_csv.split("|")[0] }}'
        sat_cur: '{{ (hsv_cur_csv.split("|")[1])|float * 100 }}'
        # Get the H/S of next colors.
        hsv_next_csv: '{{ color_hsv_list[i_next] }}'
        hue_next: '{{ hsv_next_csv.split("|")[0] }}'
        sat_next: '{{ (hsv_next_csv.split("|")[1])|float * 100 }}'

        # Get the hue color distance.
        # https://stackoverflow.com/questions/1878907#comment119528981_7869457
        color_distance: '{{ ((hue_next - hue_cur + 540) % 360) - 180 }}'
        color_distance_abs: '{{ color_distance|abs }}'

        # Determine the ideal amount of steps to make between colors.
        iterations_desired: >-
          {% if color_distance_abs < max_color_distance %}
            {{ 1 }}
          {% else %}
            {{ (color_distance_abs / max_color_distance)|round(0, 'floor') }}
          {% endif %}

        # Limit the fade iterations based on configuration.
        fade_iterations: '{{ min(iterations_desired, (max_changes_per_second * transition_seconds)) }}'
        # Calculate what we need to increase/decrease the Hue/Sat by for each fade iteration.
        hue_step: '{{ (color_distance / fade_iterations) }}'
        sat_step: '{{ ((sat_next - sat_cur) / fade_iterations) }}'

    - alias: Fade to Next Color
      repeat:
        count: '{{ fade_iterations }}'
        sequence:
          - condition: and
            conditions:
              - condition: state
                entity_id: !input 'light'
                state: 'on'
              - condition: state
                entity_id: !input 'helper_toggle'
                state: 'on'
          - variables:
              # If the provided light entity is a group, we want to ensure we
              # only change colors of lights that are currently on, otherwise
              # it will turn on the lights that are off, just to change colors.
              # We want to only change colors on lights that are currently on.
              # This works for both single lights and groups.
              lights_currently_on: "{{
                expand(color_loop_light)
                | selectattr('domain', 'eq', 'light')
                | selectattr('state', 'eq', 'on')
                | map(attribute='entity_id')
                | list
              }}"
              # Total fade iterations so-far.
              t_total: '{{ repeat.index }}'
              # Current fade iterations we're on.
              t_cur: '{{ (t_total - 1) % fade_iterations }}'
              # Divide the transition in by # of iterations.
              transition_time_length: '{{ transition_seconds / fade_iterations }}'
              transition_time_start: '{{ as_timestamp(utcnow()) }}'
              transition_time_end: "{{ as_timestamp(utcnow()) + transition_time_length }}"
              # Get the current Hue value and compensate if it rolls over 0 or 360.
              transition_hue_calc: '{{ hue_cur + (hue_step * t_cur)|round(2) }}'
              transition_hue: >-
                {% if transition_hue_calc > 360 %}
                  {{ transition_hue_calc - 360 }}
                {% elif transition_hue_calc < 0 %}
                  {{ transition_hue_calc + 360 }}
                {% else %}
                  {{ transition_hue_calc }}
                {% endif %}
              transition_sat: '{{ min(max((sat_cur + (sat_step * t_cur))|round(2), 0), 100) }}'

          # Transition to the next mid-way color or final color.
          - service: light.turn_on
            target:
              entity_id: '{{ lights_currently_on }}'
            data:
              hs_color: '{{ [transition_hue, transition_sat] }}'
              transition: '{{ transition_time_length }}'

          # While this current color is transitioning, check to see if the
          # toggle has turned off, if so abort the automation.
          # This will only be applicable if either:
          # - A toggle is used to control the color loop.
          # - If transition_time_length  > toggle_transition_check_time
          # Otherwise just run a delay the same time amount as the color transition.
          - if:
              - condition: or
                conditions:
                - '{{ toggle_is_used == false }}'
                - '{{ transition_time_length <= toggle_transition_check_time }}'

            # Toggle-check not applicable, just wait until the transition is complete.
            then:
              - delay: '{{ transition_time_length }}'

            # Toggle-check is applicable, loop every X seconds while the color
            # is transitioning and check to see if the toggle is switched off.
            else:
              - alias: Check to see if toggle is turned off during transition.
                repeat:
                  until:
                    - condition: or
                      conditions:
                      - '{{ as_timestamp(utcnow()) >= transition_time_end }}'
                      - condition: state
                        entity_id: !input 'light'
                        state: 'off'
                  sequence:
                  - if:
                      # Check if the toggle has switched off mid-transition.
                      - condition: state
                        entity_id: !input 'helper_toggle'
                        state: "off"
                    then:
                      # Stop the current transition of the light by setting
                      # the light to its current color with a transition of 0.
                      - service: light.turn_on
                        target:
                          entity_id: '{{ lights_currently_on }}'
                        data:
                          hs_color: "{{ state_attr(color_loop_light, 'hs_color') }}"
                          transition: 0
                      # Stop the automation.
                      - stop: "Stopped because the toggle was switched off"
                    else:
                      # Wait either "toggle_transition_check_time" or until the
                      # transition is complete (whatever is less).
                      - variables:
                          delay: >
                            {% set time_now = as_timestamp(utcnow()) %}
                            {% if (time_now + toggle_transition_check_time) > transition_time_end %}
                              {{ max(0, (transition_time_end - time_now)) }}
                            {% else %}
                              {{ toggle_transition_check_time }}
                            {% endif %}
                      - delay: '{{ delay }}'
No results found