nanosonde nanosonde

Deprecated

The method described in this gist has been deprecated/superceeded by kiler129/early-vfio-pci-isolate tool.
It is more robust, configurable, and doesn't hack around scripts that are sometimes overwritten by system updates. The tool uses similar methods to the ones described below, but extends the capabilities by e.g. easy NVMe passthrough by S/N.

The description below has been preserved for historical context. At the time of writing, the tool above has been tested for ~6 months across multiple systems.

OpenWRT-NPTv6-scripts

LICENSE

WTFPL

Note

File iptables-nptv6.sh is tested on OpenWRT 19.07 it's use iptables as network filter tool.
File nptv6.sh is tested on OpenWRT 23.05, and use nftables as network filter tool. It also keep iptables compatibility but no tested. If have any issue, please comment at below (suggested) or email me.

Example devices

Inkbird IBT-2X
Inkbird IBT-4XS
EasyBBQ FCCID: FCC ID 2AI4MPRO3 (SHENZHEN HYPERSYNES CO.,LTD Smart Wireless Thermometer PRO3)

Properties

@ConnectTimeout: 60 seconds
@BatteryPollingInterval: 5 minutes

The iBBQ is a Bluetooth LE Gatt Device

Compatibility

I currently run Ubiquiti's UniFi Controller on a Raspberry Pi 3B without issue. I have tried with a Raspberry Pi 1B, but the application crashes on startup. I assume it is due to a lack of RAM. Presumably, it would run on a Raspberry Pi 2B as well (same amount of RAM), but I have not tested it on this model. YMMV.

Instructions

Install Raspbian on a SD card. I tested this with Jessie Lite (headless)
Use raspi-config to expand the filesystem, rename your PI, etc

Build ios app for iphoneos sdk with signing using Travis ci.

Export your private key that you are going to use for signing from Keychain Access app to ~/privateKey.p12 with export password __YourRandomPass22
Fetch script and run it from your Travis-enabled target iOS app repo: IOS_IDENTITY_KEY=~/privateKey.p12 IOS_IDENTITY_KEY_PASSWORD=__YourRandomPass22 bash <(curl -s https://gist.githubusercontent.com/darvin/96a3af399d0b970a59b1/raw/setup_travis_ios_signing.sh)
Review changes and commit. It suppose to work now.

	#!/bin/sh
	#
	# Author: Riyad Preukschas <[email protected]>
	# License: Mozilla Public License 2.0
	# SPDX-License-Identifier: MPL-2.0
	#
	# OpenWRT firewall script for configuring NPTv6 (network prefix translation).
	#
	# # Installation
	#

	#!/bin/bash
	#
	# Credits to fuckbecauseican5 from https://www.reddit.com/r/hackintosh/comments/4s561a/macos_sierra_16a238m_install_success_and_guide/
	# Adapted to work with the official image available into Mac App Store
	#
	# Enjoy!

	hdiutil attach /Applications/Install\ macOS\ Sierra.app/Contents/SharedSupport/InstallESD.dmg -noverify -nobrowse -mountpoint /Volumes/install_app
	hdiutil create -o /tmp/Sierra.cdr -size 7316m -layout SPUD -fs HFS+J
	hdiutil attach /tmp/Sierra.cdr.dmg -noverify -nobrowse -mountpoint /Volumes/install_build

	# Mirror of the instructions available here:
	# http://www.lowefamily.com.au/2016/06/02/installing-ubiquiti-unifi-controller-5-on-raspberry-pi/
	#
	# These commands CANNOT be run in a script.
	# They're just for reference.


	# Install on Raspbian Jessie, or upgrade from Wheezy.
	# Make sure all packages are upgraded (update && upgrade).

	#!/bin/bash
	# Author: Fabien Poussin
	# Last edit: 20/11/2014
	#
	# You will need the following mingw32/64 or equivalent linux packages to build it:
	# msys gcc msys-coreutils msys-wget msys-autoconf msys-automake msys-mktemp
	#
	# Use mingw-get to install these.
	# run this script from msys's or any unix console.

	<?php

	interface Worker
	{
	public function getCommand();
	public function done($stdout, $stderr);
	public function fail($stdout, $stderr, $status);
	}