To setup Carvera controller (and pendant) on ArchLinux, a udev rule must be created.
sudo vim /etc/udev/rules.d/99-carverausb.rules
# Carvera Air USB Serial Device
SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE="0666"
| #!/usr/local/munki/munki-python | |
| '''Demo only. Needs more robust error checking and handling''' | |
| import os | |
| from Foundation import NSURL, NSURLQuarantinePropertiesKey | |
| def getQuarantineAttribute(pathname): | |
| '''Returns a dict contaning quarantine info for pathname or None''' |
| #!/usr/bin/env bash | |
| # Using Docker on TrueNAS SCALE (no Kubernetes) | |
| # | |
| # Don't setup Apps via the TrueNAS Web GUI (don't choose a pool for Apps when asked) | |
| # Make a dedicated docker dataset on one of your data pools | |
| # Store this script somewhere else on your pool (not in the Docker dataset) | |
| # Make a daeomon.json file in the same directory with the following contents: | |
| # {"data-root": "/mnt/path/to/desired/docker/dataset/", "exec-opts": ["native.cgroupdriver=cgroupfs"]} | |
| # Then schedule this script to start via System Settings -> Advanced -> Init/Shutdown Scripts -> Add: |
To use media keys on the Ducky One 2 Skyline, you must record a macro to bind the media function to a hotkey combination, i.e. Fn plus some key.
Important: In the instructions below, "Press X+Y+Z" means press and hold key X, press and hold key Y, press and hold key Z in that order, and then release all three.
As an example, to bind Fn+PgUp to the play/pause media function:
I hereby claim:
To claim this, I am signing this object:
| M584 X0 Y1 Z5:6:7 E3:4:8:9 ; Map Z to drivers 5, 6, 7. Define unused drivers 3,4,8 and 9 as extruders | |
| M569 P0 S0 ; Drive 0 goes backwards (change to S1 to reverse it) X stepper | |
| M569 P1 S1 ; Drive 1 goes forwards Y Stepper | |
| M569 P2 S1 ; Drive 2 goes forwards Unused | |
| M569 P3 S1 ; Drive 3 goes forwards Extruder | |
| M569 P4 S1 ; Drive 4 goes forwards Extruder (unused) | |
| M569 P5 S0 ; Drive 5 goes backwards Front Left Z | |
| M569 P6 S0 ; Drive 6 goes backwards Rear Left Z | |
| M569 P7 S0 ; Drive 7 goes backwards Right Z |
| ; Configuration file for Nate's RailCore II | |
| ; Communication and general | |
| M111 S0 ; Debug off | |
| M550 PRailCore300ZL ; Machine name and Netbios name (can be anything you like) | |
| ;M551 Pmyrap ; Machine password (used for FTP) | |
| ;*** If you have more than one Duet on your network, they must all have different MAC addresses, so change the last digits | |
| M540 P0xBE:0xEF:0xDE:0xAD:0xFE:0xEF ; MAC Address | |
| ; Wifi Networking | |
| M552 S1 ; Enable WiFi |
| 3:44:02 PM | |
| G32 | |
| Leadscrew adjustments made: -0.002 -0.023 -0.001, points used 3, deviation before 0.013 after 0.000 | |
| 3:43:16 PM | |
| G32 | |
| Leadscrew adjustments made: -0.001 0.022 -0.003, points used 3, deviation before 0.012 after 0.000 | |
| 3:42:34 PM | |
| G32 | |
| Leadscrew adjustments made: 0.118 0.063 0.011, points used 3, deviation before 0.070 after 0.000 | |
| 3:42:08 PM |
| ; TazStiffBlack Configuration G-Codes | |
| ; General Preferences | |
| M111 S0 ; Debug off | |
| G21 ; Work in millimetres | |
| G90 ; Send absolute coordinates... | |
| M83 ; ...but relative extruder moves | |
| M555 P2 ; Set firmware compatibility to look like Marlin | |
| M208 X0 Y0 Z0 S1 ; Set axis minima | |
| M208 X365 Y240 Z147.5 S0 ; Set axis maxima |