Skip to content

Instantly share code, notes, and snippets.

View scockman's full-sized avatar

StanleyC scockman

0 followers · 3 following
  • Hillsboro OR
View GitHub Profile
@taslabs-net
taslabs-net / pve9tb4-original.md
Created July 26, 2025 00:13
My original post on using PVE 9 BETA's GUI visible and supported Fabric ability in SDN for TB4 Networking

Complete Guide (ish): Thunderbolt 4 OpenFabric Mesh on Proxmox VE 9

Acknowledgments

This guide is heavily adapted from the excellent work by @scyto.

Original gist and foundational research: https://gist.github.com/scyto/76e94832927a89d977ea989da157e9dc

The Thunderbolt hardware detection, kernel module loading, systemd configuration, and udev automation techniques are based on scyto's pioneering work on Thunderbolt networking with Proxmox. This guide adapts those proven methods for Proxmox VE 9's new native SDN OpenFabric capabilities.

@taslabs-net
taslabs-net / PVE9_TB4_Guide_Updated.md
Last active December 6, 2025 23:58
Thunderbolt4 mesh network

PVE 9.1.1 TB4 + Ceph Guide

Updated as of: 2025-11-19 - Network architecture corrections applied

Network Architecture (UPDATED)

Cluster Management Network: 10.11.11.0/24 (vmbr0)

  • Primary cluster communication and SSH access
@scyto
scyto / proxmox.md
Last active November 26, 2025 09:15
my proxmox cluster

ProxMox Cluster - Soup-to-Nutz

aka what i did to get from nothing to done.

note: these are designed to be primarily a re-install guide for myself (writing things down helps me memorize the knowledge), as such don't take any of this on blind faith - some areas are well tested and the docs are very robust, some items, less so). YMMV

Purpose of Proxmox cluster project

Required Outomces of cluster project