Skip to content

Instantly share code, notes, and snippets.

@skramstad

skramstad/wax630-boot-log.txt

Created August 26, 2023 16:07
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save skramstad/8037fc7a8f3af089d6da575140e89000 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save skramstad/8037fc7a8f3af089d6da575140e89000 to your computer and use it in GitHub Desktop.
Download ZIP
wax630-boot-log
Raw
wax630-boot-log.txt
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.47 (nuc@nuc) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23812-8b1cc1582a) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Sat Aug 26 12:08:10 2023
[ 0.000000] Machine model: Netgear WAX630
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
[ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
[ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff]
[ 0.000000] node 0: [mem 0x0000000051100000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 17 pages/cpu s31080 r8192 d30360 u69632
[ 0.000000] pcpu-alloc: s31080 r8192 d30360 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 root=/dev/ubiblock0_1
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 878140K/1048576K available (7744K kernel code, 854K rwdata, 2296K rodata, 10816K init, 273K bss, 170436K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000115] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000128] pid_max: default: 32768 minimum: 301
[ 0.000603] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.000617] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.002473] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.002482] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.002674] rcu: Hierarchical SRCU implementation.
[ 0.002679] rcu: Max phase no-delay instances is 1000.
[ 0.003463] smp: Bringing up secondary CPUs ...
[ 0.004099] Detected VIPT I-cache on CPU1
[ 0.004244] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.004900] Detected VIPT I-cache on CPU2
[ 0.005008] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.005626] Detected VIPT I-cache on CPU3
[ 0.005730] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.005799] smp: Brought up 1 node, 4 CPUs
[ 0.005807] SMP: Total of 4 processors activated.
[ 0.005812] CPU features: detected: 32-bit EL0 Support
[ 0.005817] CPU features: detected: CRC32 instructions
[ 0.005879] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.005885] CPU: All CPU(s) started at EL1
[ 0.005888] alternatives: applying system-wide alternatives
[ 0.016387] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.016414] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.016627] pinctrl core: initialized pinctrl subsystem
[ 0.017796] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.018332] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.018377] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.018413] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.018816] thermal_sys: Registered thermal governor 'step_wise'
[ 0.019012] cpuidle: using governor menu
[ 0.019273] ASID allocator initialised with 65536 entries
[ 0.078179] SCSI subsystem initialized
[ 0.078386] usbcore: registered new interface driver usbfs
[ 0.078426] usbcore: registered new interface driver hub
[ 0.078473] usbcore: registered new device driver usb
[ 0.078890] qcom_scm: convention: smc arm 64
[ 0.080183] clocksource: Switched to clocksource arch_sys_counter
[ 0.081300] NET: Registered PF_INET protocol family
[ 0.081447] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.082751] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.082777] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.082792] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.082878] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.083150] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.083250] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.083288] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.083517] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.083554] PCI: CLS 0 bytes, default 64
[ 0.084860] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.090232] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.090246] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.101579] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.102226] msm_serial 78b3000.serial: msm_serial: detected port #0
[ 0.102276] msm_serial 78b3000.serial: uartclk = 3686400
[ 0.102387] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 18, base_baud = 230400) is a MSM
[ 0.102417] msm_serial: console setup on port #0
[ 0.686113] printk: console [ttyMSM0] enabled
[ 0.691173] msm_serial: driver initialized
[ 0.700568] loop: module loaded
[ 0.701965] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xac
[ 0.702527] nand: Winbond W29N04GZ
[ 0.709116] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.818343] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 0.856875] i2c_dev: i2c /dev entries driver
[ 0.862871] sdhci: Secure Digital Host Controller Interface driver
[ 0.862917] sdhci: Copyright(c) Pierre Ossman
[ 0.867953] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.875201] NET: Registered PF_INET6 protocol family
[ 0.879181] Segment Routing with IPv6
[ 0.883163] In-situ OAM (IOAM) with IPv6
[ 0.886686] NET: Registered PF_PACKET protocol family
[ 0.890652] 8021q: 802.1Q VLAN Support v1.8
[ 0.916800] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.917127] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 0.923004] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[ 0.929527] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 0.937197] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 0.944710] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 0.953839] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
[ 0.960787] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 816000 uV
[ 0.970769] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 880000 uV
[ 0.980578] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 968000 uV
[ 0.990438] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 717, quot_offset[ 7]= 0
[ 1.000200] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 931, quot_offset[ 7]= 210
[ 1.011048] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1039, quot_offset[ 7]= 105
[ 1.021987] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1198, quot_offset[ 7]= 155
[ 1.033114] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 1.035472] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xac
[ 1.050626] nand: Winbond W29N04GZ
[ 1.057033] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.069909] 28 qcomsmem partitions found on MTD device qcom_nand.0
[ 1.069957] Creating 28 MTD partitions on "qcom_nand.0":
[ 1.075019] 0x000000000000-0x000000100000 : "0:sbl1"
[ 1.081970] 0x000000100000-0x000000200000 : "0:mibib"
[ 1.086692] 0x000000200000-0x000000280000 : "0:bootconfig"
[ 1.091277] 0x000000280000-0x000000300000 : "0:bootconfig1"
[ 1.096616] 0x000000300000-0x000000600000 : "0:qsee"
[ 1.104114] 0x000000600000-0x000000900000 : "0:qsee_1"
[ 1.109254] 0x000000900000-0x000000980000 : "0:devcfg"
[ 1.112263] 0x000000980000-0x000000a00000 : "0:devcfg_1"
[ 1.117344] 0x000000a00000-0x000000a80000 : "0:apdp"
[ 1.122877] 0x000000a80000-0x000000b00000 : "0:apdp_1"
[ 1.127786] 0x000000b00000-0x000000b80000 : "0:rpm"
[ 1.132756] 0x000000b80000-0x000000c00000 : "0:rpm_1"
[ 1.137494] 0x000000c00000-0x000000c80000 : "0:cdt"
[ 1.142781] 0x000000c80000-0x000000d00000 : "0:cdt_1"
[ 1.147417] 0x000000d00000-0x000000d80000 : "0:appsblenv"
[ 1.152666] 0x000000d80000-0x000000e80000 : "0:appsbl"
[ 1.158366] 0x000000e80000-0x000000f80000 : "0:appsbl_1"
[ 1.163471] 0x000000f80000-0x000001000000 : "0:art"
[ 1.168522] 0x000001000000-0x000004c00000 : "rootfs"
[ 1.220260] mtd: setting mtd18 (rootfs) as root device
[ 1.220559] mtdsplit: no squashfs found in "rootfs"
[ 1.224339] 0x000004c00000-0x000005500000 : "0:wififw"
[ 1.236697] 0x000005500000-0x000009100000 : "rootfs_1"
[ 1.285330] 0x000009100000-0x000009a00000 : "0:wififw_1"
[ 1.293045] 0x000009a00000-0x000009a80000 : "0:ethphyfw"
[ 1.293969] 0x000009a80000-0x000009c00000 : "0:mfgdata"
[ 1.299136] 0x000009c00000-0x000011c00000 : "0:ntgrdata"
[ 1.404248] 0x000011c00000-0x000013800000 : "0:oops_log"
[ 1.427016] 0x000013800000-0x000019c00000 : "0:reserved1"
[ 1.506707] 0x000019c00000-0x000020000000 : "0:reserved2"
[ 1.598823] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz
[ 1.600746] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[ 1.612860] Freeing unused kernel memory: 10816K
[ 1.660681] Run /init as init process
[ 1.660716] with arguments:
[ 1.660719] /init
[ 1.660722] with environment:
[ 1.660725] HOME=/
[ 1.660728] TERM=linux
[ 1.869311] init: Console is alive
[ 1.869517] init: - watchdog -
[ 1.877007] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.962823] malibu_phy_api_ops_init[2854]:INFO:qca probe malibu phy driver succeeded!
[ 1.967522] qca808x_phy_api_ops_init[2665]:INFO:qca probe qca808x phy driver succeeded!
[ 3.012407] regi_init[3989]:INFO:Initializing HPPE Done!!
[ 3.012544] regi_init[4049]:INFO:qca-ssdk module init succeeded!
[ 3.018461] EDMA ver 1 hw init
[ 3.023090] EDMA HW Reset completed succesfully
[ 3.025759] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[ 3.030150] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 3.237944] **********************************************************
[ 3.237980] * NSS Data Plane driver
[ 3.243371] **********************************************************
[ 3.253014] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.261221] init: - preinit -
[ 8.560169] random: crng init done
[ 8.821590] nss-dp 3a007000.dp6-syn lan1: PHY Link up speed: 2500
[ 8.821968] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
[ 10.927132] nss-dp 3a007000.dp6-syn lan1: PHY Link is down
[ 10.930320] procd: - early -
[ 10.931600] procd: - watchdog -
[ 11.463465] procd: - watchdog -
[ 11.463711] procd: - ubus -
[ 11.516732] procd: - init -
[ 11.621534] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.653524] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
[ 11.653564] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
[ 11.664184] NET: Registered PF_QIPCRTR protocol family
[ 11.691554] PPP generic driver version 2.4.2
[ 11.692229] NET: Registered PF_PPPOX protocol family
[ 11.700259] ath11k c000000.wifi: ipq8074 hw2.0
[ 11.700294] ath11k c000000.wifi: FW memory mode: 0
[ 11.704313] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 11.708932] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 11.787190] urngd: v1.0.2 started.
[ 12.060293] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 12.063706] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.105626] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[ 12.113074] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 12.113109] ath11k c000000.wifi: fw_version 0x290984a5 fw_build_timestamp 2023-07-19 02:31 fw_build_id WLAN.HK.2.9.0.1-01862-QCAHKSWPL_SILICONZ-1
[ 12.537288] ath11k c000000.wifi: htt event 48 not handled
[ 16.273674] br-lan: port 1(lan1) entered blocking state
[ 16.273720] br-lan: port 1(lan1) entered disabled state
[ 16.277945] device lan1 entered promiscuous mode
[ 16.290347] br-lan: port 2(lan2) entered blocking state
[ 16.290393] br-lan: port 2(lan2) entered disabled state
[ 16.294656] device lan2 entered promiscuous mode
[ 19.430934] nss-dp 3a007000.dp6-syn lan1: PHY Link up speed: 2500
[ 19.431028] br-lan: port 1(lan1) entered blocking state
[ 19.436019] br-lan: port 1(lan1) entered forwarding state
[ 19.441360] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 31.830215] l11: disabling
[ 512.107158] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead.
[ 527.977862] mtdblock: MTD device 'rootfs_1' is NAND, please consider using UBI block devices instead.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment