I wanted to run iperf3 on my Synology NAS to monitor WiFi speeds on different devices around my location.
Steps to install iperf3 are:
Content :
Instructions to obtain WireGuard details of your NordVPN account. These can be used to setup a WireGuard tunnel on your router to NordVPN.
Source: https://forum.gl-inet.com/t/configure-wireguard-client-to-connect-to-nordvpn-servers/10422/27
If you have any linux machine, use that or install a vm if you don't have one.
Get their official linux app installed. Make sure you have wireguard installed too. And set the used technology to Nordlynx by running nordvpn set technology nordlynx
Follow these steps to enable Screen Sharing via Terminal.
Navigate to Applications | Utilities and launch Terminal. If you're working from a keyboard only, press Command+Space Bar to launch Spotlight, and then enter Terminal in the search box to launch the app.
Enter the following command into Terminal and press Enter to execute it. You will be prompted to provide admin credentials prior to processing the command.
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/kickstart -activate -configure -access -off -restart -agent -privs -all -allowAccessFor -allUsers
The command above will work most of the time, as it uses the kickstart method of enabling remote management, which in turn enables Screen Sharing as well for all users of the device. This isn't the most secure method and it's not recommended to be used like this for long periods of time due to the potential security risks of unauthorized access, but it should serve you well as a temporary workaround for the pr
| apiVersion: extensions/v1beta1 | |
| kind: Ingress | |
| metadata: | |
| annotations: | |
| nginx.ingress.kubernetes.io/auth-type: basic | |
| nginx.ingress.kubernetes.io/auth-secret: my-basic-auth | |
| nginx.ingress.kubernetes.io/auth-realm: "Authentication Required - ok" | |
| name: my-ingress | |
| spec: | |
| rules: |
| function usage() { | |
| echo "Usage: $0 [region] [cluster name] [role arn]" | |
| echo "If you're not using a role, [region] and [role arn] are optional" | |
| echo "If you just use cluster name, you need aws-iam-authenticator installed" | |
| } | |
| if [ -z $1 ]; then | |
| usage | |
| exit 1 | |
| fi |
You can use ssacli (smart storage administrator command line interface) tool to manage any of supported HP Smart Array Controllers in your Proxmox host without need to reboot your server to access Smart Storage Administrator in BIOS. That means no host downtime when managing your storage.
CLI is not as convenient as GUI interface provided by BIOS or desktop utilities, but still allows you to fully manage your controller, physical disks and logical drives on the fly with no Proxmox host downtime.
ssacli replaces older hpssacli, but shares the same syntax and adds support for newer servers and controllers.
If you're using a high-end bluetooth headset on your Macbook Pro it's likely your mac is using an audio codec which favors battery efficiency over high quality. This results in a drastic degradation of sound, the SBC codec is the likely culprit, read more about it here.
| git clone git://git.fedorahosted.org/virt-manager.git | |
| cd virt-manager | |
| sudo port -v install intltool py27-pygtk | |
| sudo python setup.py install | |