Joseph Chiocchi yyolk

How to set up a Telegram Proxy (MTProxy)

This tutorial will teach you how to set up a Telegram MTProxy on an Ubuntu 22.04 sever using AWS Lightsail, although you can use any other Linux distribution and cloud provider.

Using a Telegram proxy is a safe, easy and effective way of overcoming Telegram bans. It's useful, for example, to keep using Telegram under tyrannical regimes, or to circumvent judges' decisions to block Telegram.

Telegram proxies are a built-in feature in all Telegram apps (both mobile and desktop). It allows Telegram users to connect to a proxy in just one or two clicks / taps.

Telegram proxies are safe: Telegram sends messages using their own MTProto secure protocol, and the proxy can only see encrypted traffic – there's no way for a proxy to decrypt the traffic and read the messages. The proxy does not even know which Telegram users are using the proxy, all the proxy sees is just a list of IPs.

Git Commit Freeze Due to GPG Lock Issues

If you encounter a problem where you cannot commit changes in Git – neither through the terminal nor via the GitHub Desktop application – the issue might be a freeze during the Git commit process. This is often caused by GPG lock issues. Below is a concise and step-by-step guide to resolve this problem.

Solution Steps

1. Check for GPG Lock Messages

Open your terminal and try to perform a GPG operation (like signing a test message). If you see repeated messages like gpg: waiting for lock (held by [process_id]) ..., it indicates a lock issue.

Hyperion + Android Grabber Ambilight Setup Guide

Intro

Usage

run install pip.py, follow instructions

edit pip config that placed in the local root
edit your pythonista_startup.py, add PIP_CONFIG_FILE env

reboot Pythonista
run run.py, then type show pip or freeze

That's all. Now you can (un)install packages, upgrade pip, whatever.

	# Create a new worktree and branch from within current git directory.
	ga() {
	if [[ -z "$1" ]]; then
	echo "Usage: ga [branch name]"
	exit 1
	fi

	local branch="$1"
	local base="$(basename "$PWD")"
	local path="../${base}--${branch}"


	# Spinners


	Perl Spinner/Heartbeat demonstrator (Unicode complaint)

	perl -CO -Mutf8 -e '$\|=1; $c=" ▏▎▍▌▋▊▉█";
	while(1){ for $i ($c=~/(.)/g) {
	print " $i\r"; select(undef,undef,undef,.1+1/length($c)); } };'

	//This is a collection of RTTTLs that can be used with any RTTTL player. Foremost it is for the Ulanzi TC001 LED Matrix.
	//Onlineplayer: https://adamonsoon.github.io/rtttl-play/


	Original1:d=4,o=5,b=140:16e,16g,16a,16c

	//ESPHOME - https://esphome.io/components/rtttl.html
	two_short:d=4,o=5,b=100:16e6,16e6
	long:d=1,o=5,b=100:e6
	siren:d=8,o=5,b=100:d,e,d,e,d,e,d,e

	import mmap


	def get_last_lines(path: str, count: int) -> list[str]:
	"""Get count last lines from a file."""
	with open(path, "r+b") as text_file:
	text_mmap = mmap.mmap(text_file.fileno(), 0, mmap.ACCESS_READ)
	position = len(text_mmap)
	while count and (position := text_mmap.rfind(b"\n", 0, position)) != -1:
	count -= 1

	#------------------------------------------------------------------------------------#
	# PIN Schematics #
	# #
	# GPIO-00 MCU-BOOT #
	# GPIO-01 Speaker Mute-Status #
	# GPIO-02 I2S MCLK #
	# GPIO-03 Touch-Screen TT21100 Interrupt Pin #
	# GPIO-04 ILI92xxx Display DC-Pin (SPI: CLK-Pin) #
	# GPIO-05 ILI92xxx Display CS-Pin (SPI: MOSI-Pin) #
	# GPIO-06 ILI92xxx Display SDA #

	# Raspberry PI OS config.toml
	# This file is used for the initial setup of the system on the first boot, if
	# it's s present in the boot partition of the installation.
	#
	# This file is loaded by firstboot, parsed by init_config and ends up
	# as several calls to imager_custom.
	# The example below has all current fields.
	#
	# References:
	# - https://github.com/RPi-Distro/raspberrypi-sys-mods/blob/master/usr/lib/raspberrypi-sys-mods/firstboot